Regional Electric-Power Systems Planning and Carbon Dioxide Emissions Management under Uncertainty

In this study, an interval two-stage integer programming model is formulated for planning electric-power systems and managing carbon dioxide (CO2) emissions under uncertainty. The developed model can reflect dynamic, interactive, and uncertain characteristics of regional energy systems. Besides, the model can be used for answering questions related to types, times, demands and mitigations of energy systems planning practices, with the objective of minimizing system cost over a long-time planning horizon. The developed model is also applied to a case study of planning CO2-emission mitigation for an electric-power system that involves fossil-fueled and renewable energy sources. Solutions can help generate electricity-generation schemes and capacity-expansion plans under different CO2-mitigation options and electricity-demand levels. Different CO2-emission management policies corresponding to different renewable energy development plans are analyzed. A high system cost will increase renewable energy supply and reduce CO2 emission, while a desire for a low cost will run into risks of a high energy deficiency and a high CO2 emission

A comparison study of geostatistical simulation for predicting soil texture

Non-Peer Reviewe

Novel patterning of nano-bioceramics: template-assisted electrohydrodynamic atomization spraying

The ability to create patterns of bioactive nanomaterials particularly on metallic and other types of implant surfaces is a crucial feature in influencing cell response, adhesion and growth. In this report, we uncover and elucidate a novel method that allows the easy deposition of a wide variety of predetermined topographical geometries of nanoparticles of a bioactive material on both metallic and non-metallic surfaces. Using different mesh sizes and geometries of a gold template, hydroxyapatite nanoparticles suspended in ethanol have been electrohydrodynamically sprayed on titanium and glass substrates under carefully designed electric field conditions. Thus, different topographies, e.g. hexagonal, line and square, from hydroxyapatite nanoparticles were created on these substrates. The thickness of the topography can be controlled by varying the spraying time

Novel hybrid vesicles co-assembled from a cationic lipid and PAAc-g-mPEG with pH-triggered transmembrane channels for controlled drug release

This work presents an important example of novel hybrid vesicles with pH-triggered transmembrane channels prepared by co-assembly of poly(acrylic acid)-g-poly(monomethoxy ethylene glycol) (PAAc-g-mPEG) with a cationic lipid, didodecyldimethylammonium bromide (DDAB), via electrostatic interaction for effective doxorubicin (DOX) release

Quadra-Spectrum and Quint-Spectrum from Inflation and Curvaton Models

We calculate the quadra-spectrum and quint-spectrum, corresponding to five and six point correlation functions of the curvature perturbation. For single field inflation with standard kinetic term, the quadra-spectrum and quint-spectrum are small, which are suppressed by slow roll parameters. The calculation can be generalized to multiple fields. When there is no entropy perturbation, the quadra-spectrum and quint-spectrum are suppressed as well. With the presence of entropy perturbation, the quadra-spectrum and quint-spectrum can get boosted. We illustrate this boost in the multi-brid inflation model. For the curvaton scenario, the quadra-spectrum and quint-spectrum are also large in the small r limit. We also calculate representative terms of quadra-spectrum and quint-spectrum for inflation with generalized kinetic terms, and estimate their order of magnitude for quasi-single field inflation.Comment: 16 pages; v2: references added

Rotor shaping method for torque ripple mitigation in variable flux reluctance machines

In this paper, four rotor shaping methods, i.e., eccentric circular, inverse cosine, inverse cosine with third harmonic, and multi-step shaping methods, are developed and compared for torque ripple mitigation in variable flux reluctance machines (VFRMs). By using a 6-stator-pole/7-rotor-pole (6/7) VFRM as an example, the design criterions and capabilities of these four methods are illustrated. It is found that all the rotor shaping methods are capable of torque ripple mitigation and applicable to all the VFRMs except those with 6 k /(6 i ± 2) k ( k , i = 1, 2, 3…) stator/rotor pole combinations. Moreover, the inverse cosine with third harmonic and multi-step shaping methods are found to have the best performance. They are able to reduce the torque ripple by 90% at a cost of only 3% torque density reduction. A 6/7 VFRM with both conventional and shaped rotors is prototyped and tested for verification

Emerging threat of thrips-borne Melon yellow spot virus on melon and watermelon in Taiwan

The thrips-borne Melon yellow spot virus (MYSV) has recently been found infecting cucurbits in Taiwan. However, this virus was indistinguishable from another thrips-borne virus species Watermelon silver mottle virus (WSMoV), which has been devastating on cucurbits in Taiwan for decades, when the antisera against their nucleocapsid proteins (NPs) were used for diagnosis. To understand the incidences of WSMoV and MYSV in melon and watermelon fields, a survey was conducted in central and southern Taiwan from July 2007 to December 2009. The samples collected from symptomatic plants were tested by indirect enzyme-linked immunosorbent assay (ELISA) using monoclonal antibodies (MAbs) specific to the NP of WSMoV or MYSV and the reliability of the results was verified by reverse transcription-polymerase chain reaction (RT-PCR) using species-specific primers. Among a total of 10,480 melon samples collected, 6% and 18.2% of them were found singly infected with WSMoV and MYSV, respectively, and 0.16% infected with both viruses. On the other hand, among 1,811 watermelon samples assayed, 22.4% and 9.2% samples were singly infected with WSMoV and MYSV, respectively, and 0.17% were infected with both viruses. In addition, the aphid-borne viruses Zucchini yellow mosaic virus (ZYMV), Papaya ringspot virus watermelon type (PRSV-W) and Cucumber mosaic virus (CMV) were also detected as prevalent viruses. Our results indicated that mixed infection with the two thrips-borne viruses is rare. Moreover, host preference for both viruses is different; WSMoV prevails on watermelon whereas MYSV is more widespread on melon. We conclude that MYSV has become a serious threat for watermelon and melon production in Taiwan and the possible control measures are discussed

Effects of Exogenous Cellulase Source on In Vitro Fermentation Characteristics and Methane Production of Crop Straws and Grasses

In vitro fermentation experiments were conducted to investigate the effects of 3 sources of exogenous cellulase products (EC) at 4 dose rates (DR) (0, 12, 37 and 62 IU/g of DM) on degradation of forage and methane production by mixed rumen micro-organisms of goats. The maximum gas production (Vf) of grasses was higher (P<0.001) in Neocallimastix patriciarum (NP) group than those in Trichoderma reesei (TR) and Trichoderma longibrachiatum (TL) groups. Quadratic increases in dry matter degradation (DMD) of forage and neutral detergent fiber (NDFD) of straw were observed for all EC, with optimum DR in the low range. Supplementation of EC originated from TR and NP increased (P<0.001) DMD of forage compared to that from TL. Addition of EC originated from TR and NP also decreased pH value, ammonia nitrogen (NH3-N) and methane (CH4) production compared to that from TL. Quadratic decreases in pH value, NH3-N and CH4 of forage were noted for EC of TR and NP, and with optimum DR in the low range. For short chain fatty acid, the EC of NP increased total volatile fatty acid (TVFA) and acetate concentration and the ratio of acetate to propionate of forage compared with EC of TL and TR, and with optimum DR in the low to medium range. It was concluded that the source of EC differed in fiber degradation and methane emission, and with optimum DR of TR in the low range (from 12 to 37 U/g DM) in improving fiber degradation and decreasing methane emission

Continuous twin screw rheo-extrusion of an AZ91D magnesium alloy

© The Minerals, Metals & Materials Society and ASM International 2012The twin screw rheo-extrusion (TSRE) is designed to take advantage of the nondendritc microstructure and thixotropic characterization of semisolid-metal slurries and produce simple metal profiles directly from melts. The extrusion equipment consists of a rotor-stator high shear slurry maker, a twin screw extruder, and a die assembly. The process is continuous and has a potential for significantly saving energy, manufacturing cost, and enhancing efficiency. The present investigation was carried out to study the process performance for processing rods of an AZ91D magnesium alloy and the microstructure evolution during processing. The semisolid slurry prepared by the process was characterized by uniformly distributed nondendritic granular primary phase particles. AZ91D rods with uniform and fine microstructures and moderate mechanical properties were produced. For the given slurry making parameters, decreasing extrusion temperature was found to improve microstructures and properties. The mechanisms of particle granulation and refinement and the effect of processing parameters on process performance and thermal management are discussed. © 2012 The Minerals, Metals & Materials Society and ASM International.EPSRC (UK) and Rautomead Lt