Bond-shear Behavior of FRP Rods as a Function of Attachment Configuration

The use of external reinforcement to improve or enhances the flexural capacity of a member depends on the transfer capacity, and the failure behavior of the composite between the reinforcement, the epoxy resin and the concrete. The most influencing factor is the bond-shear capacity between the rod and the epoxy, and the epoxy to the concrete. Fiber Reinforced Polymer (FRP) rods are the latest alternate for fulfilling the external reinforcement scheme. In the field, the mandated embedment depth as outlined by the ACI 440 code, could customary not be achieved since factors such as the depth of the concrete cover, and presence of stirrups limits the space. This study is aimed to evaluate the effect of FRP rod configurations with respect to the concrete surface, to the effectiveness of external reinforcement. The study looked into the bond-shear capacity as well as the mode of failure, influence by the rod attachment depth. It was shown that the embedment depth significantly influenced the failure mode, and therefore the strain transfer capacity from the concrete to the rods

BUCKLING OPTIMIZATION OF UNSYMMETRICALLY LAMINATED PLATES UNDER TRANSVERSE LOADS

SUMMARY: The critical buckling loads of unsymmetrically laminated rectangular plates with a given material system and subjected to combined lateral and inplane loads are maximized against fiber orientations by using a sequential linear programming method together with a simple move-limit strategy. Significant influence of plate aspect ratios, central circular cutouts, lateral loads and end conditions on the optimal fiber orientations and the associated optimal buckling loads of unsymmetrically laminated plates has been shown through this investigation

On the Performance of a Multi Story Irregular Apartment Building Model Under Seismic Load in Indonesian Moderately High Seismicity Region

Purbalingga is regency with a potential moderately high seismicity requiring compliance of planning and implementation rules of the earthquake-resistant structural system. The purpose of this research is to evaluate the performance of a ten-story irregular apartment building model in Purbalingga due to the seismic load. The study is necessarily conducted to provide information on impacts and mitigation strategies that should be implemented. This research was conducted based on the seismic capacity of 2002 and 2012 Indonesian National Standard (SNI) including linear static analysis, dynamic response analysis, and pushover analysis. Based on the direct static review, it shows that the base shear is reduced and the drift ratio level decreases respectively for X and Y direction.Meanwhile, based on the dynamic response analysis, the drift ratio level also decreases respectively for X and Y direction. Also, the pushover analysis indicates that the performance of this apartment building model is still at Immediate Occupancy (IO) level as the post-earthquake damage state that remains safe to occupy, essentially retains the pre-earthquake design strength and stiffness of the structure. The risk of life-threatening injury as a result of structural damage is very low, and although some minor structural repairs may be appropriate, these would generally not be required before occupanc

Nonlinear 3D Model of Double Shear Lap Tests for the Bond of Near-surface Mounted FRP Rods in Concrete Considering Different Embedment Depth

The utilization of near-surface mounted Fiber Reinforced Polymer (FRP) reinforcement as a method of strengthening in reinforced concrete structures has increased considerably in recent years. Moreover, the application of double-shear lap tests for this rein-forcement method leads to the achievement of a local bond-slip behavior in a bonded joint. This research, therefore, focused on 3-D modeling of this type of test to suitably characterize the bond mechanics between FRP rods and concrete at various embedment depth. The use of different alternatives to represent the interface between the FRP rod and concrete were analyzed after which a comparison was drawn between the numerical finite element (FE) simulations and experimental measurements. The results showed the prediction of the load–slip corresponded with the data obtained from the experiment. Finally, the proposed model has the ability to express the relationship between the penalty stiffness parameters in shear direction Kss = (Ktt) and the embedment depth of FRP rods

Biomechanical analysis of the lumbar spine on facet joint force and intradiscal pressure - a finite element study

<p>Abstract</p> <p>Background</p> <p>Finite element analysis results will show significant differences if the model used is performed under various material properties, geometries, loading modes or other conditions. This study adopted an FE model, taking into account the possible asymmetry inherently existing in the spine with respect to the sagittal plane, with a more geometrically realistic outline to analyze and compare the biomechanical behaviour of the lumbar spine with regard to the facet force and intradiscal pressure, which are associated with low back pain symptoms and other spinal disorders. Dealing carefully with the contact surfaces of the facet joints at various levels of the lumbar spine can potentially help us further ascertain physiological behaviour concerning the frictional effects of facet joints under separate loadings or the responses to the compressive loads in the discs.</p> <p>Methods</p> <p>A lumbar spine model was constructed from processes including smoothing the bony outline of each scan image, stacking the boundary lines into a smooth surface model, and subsequent further processing in order to conform with the purpose of effective finite element analysis performance. For simplicity, most spinal components were modelled as isotropic and linear materials with the exception of spinal ligaments (bilinear). The contact behaviour of the facet joints and changes of the intradiscal pressure with different postures were analyzed.</p> <p>Results</p> <p>The results revealed that asymmetric responses of the facet joint forces exist in various postures and that such effect is amplified with larger loadings. In axial rotation, the facet joint forces were relatively larger in the contralateral facet joints than in the ipsilateral ones at the same level. Although the effect of the preloads on facet joint forces was not apparent, intradiscal pressure did increase with preload, and its magnitude increased more markedly in flexion than in extension and axial rotation.</p> <p>Conclusions</p> <p>Disc pressures showed a significant increase with preload and changed more noticeably in flexion than in extension or in axial rotation. Compared with the applied preloads, the postures played a more important role, especially in axial rotation; the facet joint forces were increased in the contralateral facet joints as compared to the ipsilateral ones at the same level of the lumbar spine.</p

Optimization of Spinal Reconstructions for Thoracolumbar Burst Fractures to Prevent Proximal Junctional Complications: A Finite Element Study

The management strategies of thoracolumbar (TL) burst fractures include posterior, anterior, and combined approaches. However, the rigid constructs pose a risk of proximal junctional failure. In this study, we aim to systemically evaluate the biomechanical performance of different TL reconstruction constructs using finite element analysis. Furthermore, we investigate the motion and the stress on the proximal junctional level adjacent to the constructs. We used a T10-L3 finite element model and simulated L1 burst fracture. Reconstruction with posterior instrumentation (PI) alone (U2L2 and U1L1+(intermediate screw) and three-column spinal reconstruction (TCSR) constructs (U1L1+PMMA and U1L1+Cage) were compared. Long-segment PI resulted in greater global motion reduction compared to constructs with short-segment PI. TCSR constructs provided better stabilization in L1 compared to PI alone. Decreased intradiscal and intravertebral pressure in the proximal level were observed in U1L1+IS, U1L1+PMMA, and U1L1+Cage compared to U2L2. The stress and strain energy of the pedicle screws decreased when anterior reconstruction was performed in addition to PI. We showed that TCSR with anterior reconstruction and SSPI provided sufficient immobilization while offering additional advantages in the preservation of physiological motion, the decreased burden on the proximal junctional level, and lower risk of implant failure

Investigation on structural behaviour of bamboo reinforced concrete slabs under concentrated load

Reinforced concrete is perhaps the most widely used building material in the world. However, the materials used for reinforcement of concrete i.e. steel is quite expensive and scarcely available in the developing world. As a result, bamboo is considered to be a cheaper replacement with high tensile strength. This research investigated the structural behaviour of bamboo-reinforced concrete slabs used for footplate foundation subjected to concentrated load. For this purpose, four different reinforced concrete slab panels were developed and analyzed. The influence of replacing steel with bamboo for the reinforcement of concrete slabs on their structural behaviour was assessed by determining the load-deflection characteristics, the ultimate load, the stiffness, the ductility, the cracking pattern, and the energy absorption capacity. The results showed that in comparison to steel reinforced concrete slabs, the strength of 82% can be acquired by the bamboo reinforced slabs. Furthermore, ductility demonstrated by the two types of specimens was almost equivalent i.e. up to 93%. Those indicated that the structural behaviour demonstrated by bamboo reinforced slabs is quite comparable to that of steel reinforced concrete slabs. Therefore, bamboo can prove to be a promising substitute for steel in concrete reinforcement. Future studies may further examine this opportunity