63 research outputs found
pH/Temperature control of interpolymer complexation between poly(acrylic acid) and weak polybases in aqueous solutions
International audienc
Supramolecular polymer hydrogels induced by host-guest interactions with di-[cyclobis(paraquat-p-phenylene)] cross-linkers: from molecular complexation to viscoelastic properties
Supramolecular polymer networks have been designed on the basis of a -electron donor/acceptor complex: naphthalene (N)/cyclobis(paraquat-p-phenylene) (CBPQT4+=B). For this purpose, a copolymer of N,N-dimethylacrylamide P(DMA-N1), lightly decorated with 1 mol% of naphthalene pendant groups, has been studied in semi-dilute un-entangled solution in the presence of di-CBPQT4+ (BB) crosslinker type molecules. While calorimetric experiments demonstrate the quantitative binding between N and B groups up to 60 °C, the introduction of BB crosslinkers into the polymer solution gives rise to gel formation above the overlap concentration. From a comprehensive investigation of viscoelastic properties, performed at different concentrations, host/guest stoichiometric ratios and temperatures, the supramolecular hydrogels are shown to follow a Maxwellian behavior with a strong correlation of the plateau modulus and the relaxation time with the effective amount of interchain cross-linkers and their dissociation dynamics, respectively. The calculation of the dissociation rate constant of the supramolecular complex, by extrapolation of the relaxation time of the network back to the beginning of the gel regime, is discussed in the framework of theoretical and experimental works on associating polymers
Structure investigation of nanohybrid PDMA/silica hydrogels at rest and under uniaxial deformation
International audienceNano-hybrid hydrogels were prepared by cross-linking polymerization of N,N-dimethylacrylamide (DMA) within a dispersion of silica nano-particles. Working at constant polymer/water ratio, the mechanical properties of hydrogels can be finely tuned by changing either the level of covalent cross-linker and/or the amount of particles that act as physical cross-linkers through specific adsorption of PDMA chains. Whatever is the cross-linking ratio (from 0 to 1 mol%), the introduction of silica nano-particles dramatically improves the mechanical behavior of hydrogels with a concomitant increase of stiffness and nominal strain at failure. The physical interactions being reversible in nature, the dynamics of the adsorption/desorption process of PDMA chains directly controls the time-dependence of the mechanical properties. Small angle neutron scattering experiments, performed in contrast matching conditions, show that silica particles, which repel themselves at short range, remain randomly dispersed during the formation of the PDMA network. Although PDMA chains readily interact with silica particles, no significant variation of the polymer concentration was observed in the vicinity of silica surfaces. Together with the time dependence of physical interactions pointed out by mechanical analyses, this result is attributed to the moderate adsorption energy of PDMA chains with silica surfaces at pH 9. From 2D SANS experiments, it was shown that strain rapidly gives rise to a non affine deformation of the hybrid network with shearing due to the transverse compression of the particles. After loading at intermediate deformation, the particles recover their initial distribution due to the covalent network that is not damaged in these conditions. That is no longer true at high deformation where residual anisotropy is observed
Hybrid Complex Coacervate
Underwater adhesion represents a huge technological challenge as the presence of water compromises the performance of most commercially available adhesives. Inspired by natural organisms, we have designed an adhesive based on complex coacervation, a liquid-liquid phase separation phenomenon. A complex coacervate adhesive is formed by mixing oppositely charged polyelectrolytes bearing pendant thermoresponsive poly(N-isopropylacrylamide) (PNIPAM) chains. The material fully sets underwater due to a change in the environmental conditions, namely temperature and ionic strength. In this work, we incorporate silica nanoparticles forming a hybrid complex coacervate and investigate the resulting mechanical properties. An enhancement of the mechanical properties is observed below the PNIPAM lower critical solution temperature (LCST): this is due to the formation of PNIPAM-silica junctions, which, after setting, contribute to a moderate increase in the moduli and in the adhesive properties only when applying an ionic strength gradient. By contrast, when raising the temperature above the LCST, the mechanical properties are dominated by the association of PNIPAM chains and the nanofiller incorporation leads to an increased heterogeneity with the formation of fracture planes at the interface between areas of different concentrations of nanoparticles, promoting earlier failure of the network-an unexpected and noteworthy consequence of this hybrid system.</p
Underwater Adhesion of Multiresponsive Complex Coacervates
International audienceMany marine organisms have developed adhesives that are able to bond under water, overcoming the challenges associated with wet adhesion. A key element in the processing of several natural underwater glues is complex coacervation, a liquid–liquid phase separation driven by complexation of oppositely charged macromolecules. Inspired by these examples, the development of a fully synthetic complex coacervate‐based adhesive is reported with an in situ setting mechanism, which can be triggered by a change in temperature and/or a change in ionic strength. The adhesive consists of a matrix of oppositely charged polyelectrolytes that are modified with thermoresponsive poly(N‐isopropylacrylamide) (PNIPAM) grafts. The adhesive, which initially starts out as a fluid complex coacervate with limited adhesion at room temperature and high ionic strength, transitions into a viscoelastic solid upon an increase in temperature and/or a decrease in the salt concentration of the environment. Consequently, the thermoresponsive chains self‐associate into hydrophobic domains and/or the polyelectrolyte matrix contracts, without inducing any macroscopic shrinking. The presence of PNIPAM favors energy dissipation by softening the material and by allowing crack blunting. The high work of adhesion, the gelation kinetics, and the easy tunability of the system make it a potential candidate for soft tissue adhesion in physiological environments
Tuning the Interactions in Multiresponsive Complex Coacervate-Based Underwater Adhesives
In this work, we report the systematic investigation of a multiresponsive complex coacervate-based underwater adhesive, obtained by combining polyelectrolyte domains and thermoresponsive poly(N-isopropylacrylamide) (PNIPAM) units. This material exhibits a transition from liquid to solid but, differently from most reactive glues, is completely held together by non-covalent interactions, i.e., electrostatic and hydrophobic. Because the solidification results in a kinetically trapped morphology, the final mechanical properties strongly depend on the preparation conditions and on the surrounding environment. A systematic study is performed to assess the effect of ionic strength and of PNIPAM content on the thermal, rheological and adhesive properties. This study enables the optimization of polymer composition and environmental conditions for this underwater adhesive system. The best performance with a work of adhesion of 6.5 J/m2 was found for the complex coacervates prepared at high ionic strength (0.75 M NaCl) and at an optimal PNIPAM content around 30% mol/mol. The high ionic strength enables injectability, while the hydrated PNIPAM domains provide additional dissipation, without softening the material so much that it becomes too weak to resist detaching stress. © 2019 by the authors. Licensee MDPI, Basel, Switzerland
Thermoresponsive Complex Coacervate-Based Underwater Adhesive
Sandcastle worms have developed protein-based adhesives, which they use to construct protective tubes from sand grains and shell bits. A key element in the adhesive delivery is the formation of a fluidic complex coacervate phase. After delivery, the adhesive transforms into a solid upon an external trigger. In this work, a fully synthetic in situ setting adhesive based on complex coacervation is reported by mimicking the main features of the sandcastle worm's glue. The adhesive consists of oppositely charged polyelectrolytes grafted with thermoresponsive poly(N-isopropylacrylamide) (PNIPAM) chains and starts out as a fluid complex coacervate that can be injected at room temperature. Upon increasing the temperature above the lower critical solution temperature of PNIPAM, the complex coacervate transitions into a nonflowing hydrogel while preserving its volume—the water content in the material stays constant. The adhesive functions in the presence of water and bonds to different surfaces regardless of their charge. This type of adhesive avoids many of the problems of current underwater adhesives and may be useful to bond biological tissues.</p
Caracterisation physico-chimique de polysaccharides d'origine vegetale : analyse des ciments pectiques au cours de la croissance et du rouissage du lin
CNRS T Bordereau / INIST-CNRS - Institut de l'Information Scientifique et TechniqueSIGLEFRFranc
Associations hybrides en milieu aqueux entre copolymères greffés et nanoparticules de silice (synthèse, structure et propriétés rhéologiques)
PARIS-BIUSJ-Thèses (751052125) / SudocPARIS-BIUSJ-Physique recherche (751052113) / SudocSudocFranceF
Associations macromoléculaires en solution et aux interfaces (stimulation et ciblage par le pH et la température)
Nous étudions les propriétés associatives de polymères stimulables en solution et aux interfaces. Les associations sont contrôlées par la température et le pH en utilisant des unités complémentaires. Les associations sont induites par une séparation de phase de type LCST. L introduction de motifs ionisables dans ces chaînes de PNIPAM permet de rendre le polymère également sensible au pH. Deux séries de copolymères sont ainsi préparées : l une comportant des motifs acides faibles dans la chaîne à LCST (unités d Acide Acrylique (AA)), l autre possédant des unités bases faibles ((N,N methacrylamide de [(diméthyl amino) propyle] (MADAP). Alors que les polymères précurseurs PNIPAM-AA et PNIPAM-MADAP sous forme ionisée ne présentent pas individuellement de comportement thermo-associatif, leur mélange permet de générer une agrégation originale faisant intervenir une complexation électrostatique induite par chauffage. Le greffage de ces moteurs macromoléculaires sur un squelette hydrosoluble de poly(acrylamide) permet d envisager la formation de gels réversibles en solution semi-diluée étudiée par DSC, rhéologie et diffusion de neutrons aux petits angles. Le choix des paramètres environnementaux (pH, température, force ionique) ainsi que l addition de polymères précurseurs de charge opposée aux greffons permet de piloter l association de manière très spécifique. De manière originale, les connaissances issues des propriétés associatives en solution sont appliquées aux interfaces pour rendre les surfaces adaptatives. Les interactions spécifiques entre des brosses de polymères et des solutions macromoléculaires sont caractérisées par ellipsométrie et par réflectivité de neutrons. Nous montrons que l adsorption de polymères précurseurs et de copolymères en peigne sur des brosses d homopolymère est contrôlée par les conditions environnementales (pH et température) et est complètement réversible.PARIS-BIUSJ-Physique recherche (751052113) / SudocSudocFranceF
- …