Development of metal-containing polymers for optoelectronic applications

Most of the work in organic electroluminescent polymers has been focused on organic conjugated polymers. However, polymers attached with transition metal complex have received relatively less attention. We have synthesized and studied the light emitting properties of some metal containing polymers based on the polypyridine complexes of rhenium and ruthenium. These complexes exhibit long-lived excited states caused by the metal to ligand charge transfer transitions. By varying the structure of the ligand and/or the transition metal, we are able to fine-tune the electronic properties of the resulting metal complexes.We have synthesized a series of poly(phenylenevinylene) (PPV) derivatives which are functionalized with ruthenium polypyridine complexes at the polymer mainchain or side chain. These complexes are able to act as photosensitizers which enhance the photoconductivity of these polymers at longer wavelength. Both the conjugatedbackbone and the metal complex can emit light upon excitation. As a result, it is possible to tune the color by loading different amount of ruthenium complex to the polymer. Luminescence studies showed that the ruthenium complex could quench the emission of the conjugated backbone in some polymers, which suggests an energy transfer processbetween the backbone and the metal complexes. It was also found that the presence of metal complexes could enhance the charge carrier mobilities of the polymers, as the metal and/or ligands can act as extra charge carriers in the charge transport process.published_or_final_versio

PGB pair production at LHC and ILC as a probe of the topcolor-assisted technicolor models

The topcolor-assisted technicolor (TC2) model predicts some light pseudo goldstone bosons (PGBs), which may be accessible at the LHC or ILC. In this work we study the pair productions of the charged or neutral PGBs at the LHC and ILC. For the productions at the LHC we consider the processes proceeding through gluon-gluon fusion and quark-antiquark annihilation, while for the productions at the ILC we consider both the electron-positron collision and the photon-photon collision. We find that in a large part of parameter space the production cross sections at both colliders can be quite large compared with the low standard model backgrounds. Therefore, in future experiments these productions may be detectable and allow for probing TC2 model.Comment: 26 pages, 16 figures. slight changes in the text; notations for curves changed; references adde

Correlated fragile site expression allows the identification of candidate fragile genes involved in immunity and associated with carcinogenesis

Common fragile sites (cfs) are specific regions in the human genome that are particularly prone to genomic instability under conditions of replicative stress. Several investigations support the view that common fragile sites play a role in carcinogenesis. We discuss a genome-wide approach based on graph theory and Gene Ontology vocabulary for the functional characterization of common fragile sites and for the identification of genes that contribute to tumour cell biology. CFS were assembled in a network based on a simple measure of correlation among common fragile site patterns of expression. By applying robust measurements to capture in quantitative terms the non triviality of the network, we identified several topological features clearly indicating departure from the Erdos-Renyi random graph model. The most important outcome was the presence of an unexpected large connected component far below the percolation threshold. Most of the best characterized common fragile sites belonged to this connected component. By filtering this connected component with Gene Ontology, statistically significant shared functional features were detected. Common fragile sites were found to be enriched for genes associated to the immune response and to mechanisms involved in tumour progression such as extracellular space remodeling and angiogenesis. Our results support the hypothesis that fragile sites serve a function; we propose that fragility is linked to a coordinated regulation of fragile genes expression.Comment: 18 pages, accepted for publication in BMC Bioinformatic

Four Generations: SUSY and SUSY Breaking

We revisit four generations within the context of supersymmetry. We compute the perturbativity limits for the fourth generation Yukawa couplings and show that if the masses of the fourth generation lie within reasonable limits of their present experimental lower bounds, it is possible to have perturbativity only up to scales around 1000 TeV. Such low scales are ideally suited to incorporate gauge mediated supersymmetry breaking, where the mediation scale can be as low as 10-20 TeV. The minimal messenger model, however, is highly constrained. While lack of electroweak symmetry breaking rules out a large part of the parameter space, a small region exists, where the fourth generation stau is tachyonic. General gauge mediation with its broader set of boundary conditions is better suited to accommodate the fourth generation.Comment: 27 pages, 5 figure

A hysteretic multiscale formulation for nonlinear dynamic analysis of composite materials

This article has been made available through the Brunel Open Access Publishing Fund.A new multiscale finite element formulation is presented for nonlinear dynamic analysis of heterogeneous structures. The proposed multiscale approach utilizes the hysteretic finite element method to model the microstructure. Using the proposed computational scheme, the micro-basis functions, that are used to map the microdisplacement components to the coarse mesh, are only evaluated once and remain constant throughout the analysis procedure. This is accomplished by treating inelasticity at the micro-elemental level through properly defined hysteretic evolution equations. Two types of imposed boundary conditions are considered for the derivation of the multiscale basis functions, namely the linear and periodic boundary conditions. The validity of the proposed formulation as well as its computational efficiency are verified through illustrative numerical experiments

Review of recent progress in nanoscratch testing

Nanoscratch testing, as an important technique for the assessment of the mechanical failure behaviour and adhesion strength of ceramic coatings and a simulation tool of single asperity contact in tribological experiments, is increasingly becoming an established nanomechanical characterisation method. This paper reviews recent work in nanoscratch testing in different engineering applications including thin ceramic films, automotive organic coatings, chemical- mechanical polishing and biomaterials. In the main part of the paper, nanoscratch results from experiments performed using NanoTest systems fitted with tangential force sensors and spherical indenters as scratch probes are presented and discussed. The types of nanoscratch tests described include constant load nanoscratches, ramped load nanoscratch tests and multipass repetitive unidirectional constant load nanoscratch tests (nanowear). The results are discussed in terms of critical load sensitivity to intrinsic and extrinsic factors, impact of scan speed and loading rate, influence of probe radius and geometry, estimation of tip contact pressure, influence of surface roughness and film stress and thickness, and finally role of ploughing on friction evolution

Tiny Sea Anemone from the Lower Cambrian of China

Background Abundant fossils from the Ediacaran and Cambrian showing cnidarian grade grossly suggest that cnidarian diversification occurred earlier than that of other eumetazoans. However, fossils of possible soft-bodied polyps are scanty and modern corals are dated back only to the Middle Triassic, although molecular phylogenetic results support the idea that anthozoans represent the first major branch of the Cnidaria. Because of difficulties in taxonomic assignments owing to imperfect preservation of fossil cnidarian candidates, little is known about forms ancestral to those of living groups. Methods and Findings We have analyzed the soft-bodied polypoid microfossils Eolympia pediculata gen. et sp. nov. from the lowest Cambrian Kuanchuanpu Formation in southern China by scanning electron microscopy and computer-aided microtomography after isolating fossils from sedimentary rocks by acetic acid maceration. The fossils, about a half mm in body size, are preserved with 18 mesenteries including directives bilaterally arranged, 18 tentacles and a stalk-like pedicle. The pedicle suggests a sexual life cycle, while asexual reproduction by transverse fission also is inferred by circumferential grooves on the body column. Conclusions The features found in the present fossils fall within the morphological spectrum of modern Hexacorallia excluding Ceriantharia, and thus Eolympia pediculata could be a stem member for this group. The fossils also demonstrate that basic features characterizing modern hexacorallians such as bilateral symmetry and the reproductive system have deep roots in the Early Cambrian.Funding was provided by the National Science Foundation of China (http://www.nsfc.gov.cn/) grants 40830208, 40602003, 50702005 to J. Han and D. G. Shu, and by MOST Special Fund from the State Key Laboratory of Continental Dynamics, Northwest University, China (http://sklcd.nwu.edu.cn/) to J. Han and D. G. Shu. The funders had no role in study design, data collection and analysis, decision to publish, or preparation of the manuscript.Peer reviewe

Hydroxyl radical-aided thermal pretreatment of algal biomass for enhanced biodegradability

BACKGROUND: Algal biomass, known as a potential feedstock for biofuel production, has cell wall structures that differ from terrestrial biomass. The existing methods for processing algae are limited to conventional pretreatments for terrestrial biomass. RESULTS: In this study, we investigated a novel hydroxyl radical-aided approach for pretreating different types of algal biomass. In this process, hydroxyl radicals formed by a Fenton system were employed in combination with heating to alter the crystalline structure and hydrogen bonds of cellulose in the algal biomass. FeSO(4) and H(2)O(2) at low concentrations were employed to initiate the formation of hydroxyl radicals. This method releases trapped polysaccharides in algal cell walls and converts them into fermentable sugars. The effects of temperature, time, and hydroxyl radical concentration were analyzed. The optimal pretreatment condition [100 °C, 30 min, and 5.3 mM H(2)O(2) (determined FeSO(4) concentration of 11.9 mM)] was identified using a central composite design. Complete (100 %) carbohydrate recovery was achieved with some algal biomass without formation of inhibitors such as hydroxymethylfurfural and furfural as by-products. Both microalgal and macroalgal biomasses showed higher enzymatic digestibility of cellulose conversion (>80 %) after the milder pretreatment condition. CONCLUSION: Hydroxyl radical-aided thermal pretreatment was used as a novel method to convert the carbohydrates in the algal cell wall into simple sugars. Overall, this method increased the amount of glucose released from the algal biomass. Overall, enhanced algal biomass digestibility was demonstrated with the proposed pretreatment process. The new pretreatment requires low concentration of chemical solvents and milder temperature conditions, which can prevent the toxic and corrosive effects that typically result from conventional pretreatments. Our data showed that the advantages of the new pretreatment include higher carbohydrate recovery, no inhibitor production, and lower energy consumption. The new pretreatment development mimicking natural system could be useful for biochemical conversion of algal biomass to fuels and chemicals. ELECTRONIC SUPPLEMENTARY MATERIAL: The online version of this article (doi:10.1186/s13068-015-0372-2) contains supplementary material, which is available to authorized users