Feasibility study of cassava meal in broiler diets by partial replacing energy source (corn) in regard to gross response and carcass traits

Day-old unsexed broiler chicks (Cobb 500) were used to investigate the growth responses and meat yield traits by nourishing them under four dietary treatment group in inclusion of cassava meal with partial substitution of valuable energy source (maize or corn). A total of 260 birds were assigned randomly into four dietary treatments [T1 (0%); T2 (10%); T3 (20%), and T4 (30%)]; each replicated 5 times, 13 birds/replicate in a completely randomized design. Birds were reared with ad libitum feeding, similar housing, and environmental management condition from d1-35 days. Growth responses of broilers in terms of feed intake, body weight, feed conversion ratio (FCR), livability and meat yield traits were assessed in this study. Except for first week, the feed intake of birds on cassava treated diets up to 21 and 35 days was significantly (p<0.001) higher than the non-cassava or control diet (T1). Feed intake of broilers on cassava treated diet (T4 ) had the highest (2795.8 g/b) while the birds of control (T1) diet group consumed the lowest feed (2771.9 g/b) at 35 day. Live weight decreased (p<0.001) with the inclusion of cassava meal diets up to 21 day only; and live weights up to 7 and 35 days were identical between treatment. FCR up to 21 day was improved (p<0.001) on control diet (T1) and deteriorated on cassava treated diets. FCR values up to 7 and 35 days were unaffected by all the treatment groups. Neither the livability nor the meat yield traits (thigh, breast, drumstick, shank, neck, giblet, wing and dressing yield) of broiler chickens was influenced by the dietary treatments regardless of feeding broiler chickens with cassava or non-cassava diets in this study. It may be deduced based on the present findings that, cassava tuber meal might be a potential ingredient to replace the costly maize up to 300 g kg-1 without affecting growth performance of the broiler chickens. DOI: http://dx.doi.org/10.3329/ijarit.v3i2.17846 Int. J. Agril. Res. Innov. & Tech. 3 (2): 59-65, December, 201

Peripheral Neuropathy Phenotyping in Rat Models of Type 2 Diabetes Mellitus: Evaluating Uptake of the Neurodiab Guidelines and Identifying Future Directions

Diabetic peripheral neuropathy (DPN) affects over half of type 2 diabetes mellitus (T2DM) patients, with an urgent need for effective pharmacotherapies. While many rat and mouse models of T2DM exist, the phenotyping of DPN has been challenging with inconsistencies across laboratories. To better characterize DPN in rodents, a consensus guideline was published in 2014 to accelerate the translation of preclinical findings. Here we review DPN phenotyping in rat models of T2DM against the ‘Neurodiab’ criteria to identify uptake of the guidelines and discuss how DPN phenotypes differ between models and according to diabetes duration and sex. A search of PubMed, Scopus and Web of Science databases identified 125 studies, categorised as either diet and/or chemically induced models or transgenic/spontaneous models of T2DM. The use of diet and chemically induced T2DM models has exceeded that of transgenic models in recent years, and the introduction of the Neurodiab guidelines has not appreciably increased the number of studies assessing all key DPN endpoints. Combined high-fat diet and low dose streptozotocin rat models are the most frequently used and well characterised. Overall, we recommend adherence to Neurodiab guidelines for creating better animal models of DPN to accelerate translation and drug development

Effect of Lime, Magnesium and Boron on Wheat (Triticum aestivum L.) and Their Residual Effects on Mungbean (Vigna radiata L.)

The study was carried out during 2007-2008 season in the research field of Wheat Research Centre, Bangladesh Agricultural Research Institute, Dinajpur to know the effect of lime, Magnesium (Mg) and Boron (B) on yield and yield components of wheat and also their residual effect on mungbean. The geographical position of the area is between 25°62´ N, 88°63´ E and 38.20 meter above sea level. The experiment was laid out in Randomized Complete Block Design with three replications, both in wheat and mungbean. Treatments for wheat were (I) recommended fertilizer + Mg + B, (II) recommended fertilizer + lime + B + Mg, (III) recommended fertilizer + lime + Mg, (IV) recommended fertilizer + lime + B and (V) control (Only recommended fertilizer) and for mungbean were (I) recommended fertilizer + Mg + B, (II) 75% of recommended dose, (III) recommended fertilizer + B, (IV) recommended fertilizer + Mg and (V) control (without fertilizers). Results showed that the highest yield and yield components of wheat were recorded from recommended fertilizers + lime + B + Mg treated plot and the second highest were recorded from recommended fertilizers + lime + Mg treated plot. The lowest was recorded in control plot (only recommended fertilized). In case of mungbean the highest was found from recommended fertilizers + B treated plot, this treatment was limed in previously cultivated wheat crop and the lowest was recorded from control plot (without fertilizer). DOI: http://dx.doi.org/10.3329/ijarit.v1i1-2.13923 Int. J. Agril. Res. Innov. & Tech. 1 (1&2): 9-15, December, 201

Topical delivery of 3-O-ethyl L-ascorbic acid from complex solvent systems

3-O-ethyl l-ascorbic acid (EA), an ether derivative of Vitamin C, is widely used in skincare formulations. Previously, we reported the effects of neat solvents on EA percutaneous absorption and observed that 0.6–7.5% of the applied EA was delivered through the skin over 24 h. In this work, we designed complex formulations using combinations of solvents that may act synergistically and examined their impact on EA permeation in porcine skin in vitro under finite dose conditions. Binary combinations of propylene glycol (PG) with propylene glycol monolaurate (PGML) were effective in enhancing skin permeation of EA compared with individual solvents (p 0.05). Addition of the volatile solvent isopropyl alcohol (IPA) to PG solutions also did not improve EA skin delivery compared with neat PG. Ternary solvent systems containing PG:PGML were subsequently prepared by the addition of a lipophilic solvent, either isopropyl myristate (IPM), medium-chain triglycerides (MCT) or isostearyl isostearate (ISIS). The optimum vehicle, PG:PGML:IPM, promoted up to 70.9% skin delivery of EA. The PG:PGML:ISIS vehicles also promoted EA permeation across the skin, but to a significantly lesser extent than the IPM-containing vehicles. No enhancement of EA delivery was noted for the PG:PGML:MCT mixtures. These results will inform the development of targeted formulations for EA in the future

Peripheral Neuropathy Phenotyping in Rat Models of Type 2 Diabetes Mellitus: Evaluating Uptake of the Neurodiab Guidelines and Identifying Future Directions

Diabetic peripheral neuropathy (DPN) affects over half of type 2 diabetes mellitus (T2DM) patients, with an urgent need for effective pharmacotherapies. While many rat and mouse models of T2DM exist, the phenotyping of DPN has been challenging with inconsistencies across laboratories. To better characterize DPN in rodents, a consensus guideline was published in 2014 to accelerate the translation of preclinical findings. Here we review DPN phenotyping in rat models of T2DM against the ‘Neurodiab’ criteria to identify uptake of the guidelines and discuss how DPN phenotypes differ between models and according to diabetes duration and sex. A search of PubMed, Scopus and Web of Science databases identified 125 studies, categorised as either diet and/or chemically induced models or transgenic/spontaneous models of T2DM. The use of diet and chemically induced T2DM models has exceeded that of transgenic models in recent years, and the introduction of the Neurodiab guidelines has not appreciably increased the number of studies assessing all key DPN endpoints. Combined high-fat diet and low dose streptozotocin rat models are the most frequently used and well characterised. Overall, we recommend adherence to Neurodiab guidelines for creating better animal models of DPN to accelerate translation and drug development.</jats:p

Epidemiology and genetic characterization of Peste des petits ruminants virus in Bangladesh

Peste des petits ruminants (PPR) is an acute, highly contagious disease responsible for high morbidity and mortality rates in susceptible sheep and goats. Adequate knowledge of the diversity of circulating strains of PPR virus will help livestock authorities choose appropriate vaccines. The objective of this study was to describe the epidemiology of PPR and characterize the strains circulating in Bangladesh. Veterinarians enrolled goats showing signs consistent with PPR, including diarrhoea, fever and respiratory distress, from three veterinary hospitals. Post-treatment follow up was carried out to ascertain health outcomes of the goats. Faecal and throat swab samples were collected from the goats and tested for PPRV RNA using real-time reverse transcription polymerase chain reaction (rRT-PCR). Nucleotide sequence-based phylogenetic analyses of two structural genes, the nucleocapsid (N gene), and the haemagglutinin (H gene) were studied to determine the genetic variations of PPRV strains. Of the 539 goats enrolled, 38% (203/539) had detectable RNA for PPRV. We were able to follow up with 91% (184/203) of the PPRV infected goats; 44 of them died (24%). PPRV was more frequently identified in the summer (45%) than in the rainy season (29%) (Odds ratio = 1.9, 95% confidence interval: 1.3–3.1). Bangladeshi strains were phylogenetically similar to the lineage IV PPRV strains; showing particularly strong affiliation with Tibetan and Indian strains. PPR is a common viral infection of the goats in Bangladesh, with a high case-fatality rate. This study confirms the circulation of lineage IV PPRV in the country with unique amino acid substitutions in N and H proteins and provides baseline data for vaccine development and implementation

A decade of inequality in maternity care: antenatal care, professional attendance at delivery, and caesarean section in Bangladesh (1991–2004)

<p>Abstract</p> <p>Background</p> <p>Bangladesh is committed to the fifth Millennium Development Goal (MDG-5) target of reducing its maternal mortality ratio by three-quarters between 1990 and 2015. Since the early 1990s, Bangladesh has followed a strategy of improving access to facilities equipped and staffed to provide emergency obstetric care (EmOC).</p> <p>Methods</p> <p>We used data from four Demographic and Health Surveys conducted between 1993 and 2004 to examine trends in the proportions of live births preceded by antenatal consultation, attended by a health professional, and delivered by caesarean section, according to key socio-demographic characteristics.</p> <p>Results</p> <p>Utilization of antenatal care increased substantially, from 24% in 1991 to 60% in 2004. Despite a relatively greater increase in rural than urban areas, utilization remained much lower among the poorest rural women without formal education (18%) compared with the richest urban women with secondary or higher education (99%). Professional attendance at delivery increased by 50% (from 9% to 14%, more rapidly in rural than urban areas), and caesarean sections trebled (from 2% to 6%), but these indicators remained low even by developing country standards. Within these trends there were huge inequalities; 86% of live births among the richest urban women with secondary or higher education were attended by a health professional, and 35% were delivered by caesarean section, compared with 2% and 0.1% respectively of live births among the poorest rural women without formal education. The trend in professional attendance was entirely confounded by socioeconomic and demographic changes, but education of the woman and her husband remained important determinants of utilization of obstetric services.</p> <p>Conclusion</p> <p>Despite commendable progress in improving uptake of antenatal care, and in equipping health facilities to provide emergency obstetric care, the very low utilization of these facilities, especially by poor women, is a major impediment to meeting MDG-5 in Bangladesh.</p

Diets containing sea cucumber (Isostichopus badionotus) meals are hypocholesterolemic in young rats

Peer reviewedPublisher PD

Dose-response relationship between arsenic exposure and the serum enzymes for liver function tests in the individuals exposed to arsenic: a cross sectional study in Bangladesh

<p>Abstract</p> <p>Background</p> <p>Chronic arsenic exposure has been shown to cause liver damage. However, serum hepatic enzyme activity as recognized on liver function tests (LFTs) showing a dose-response relationship with arsenic exposure has not yet been clearly documented. The aim of our study was to investigate the dose-response relationship between arsenic exposure and major serum enzyme marker activity associated with LFTs in the population living in arsenic-endemic areas in Bangladesh.</p> <p>Methods</p> <p>A total of 200 residents living in arsenic-endemic areas in Bangladesh were selected as study subjects. Arsenic concentrations in the drinking water, hair and nails were measured by Inductively Coupled Plasma Mass Spectroscopy (ICP-MS). The study subjects were stratified into quartile groups as follows, based on concentrations of arsenic in the drinking water, as well as in subjects' hair and nails: lowest, low, medium and high. The serum hepatic enzyme activities of alkaline phosphatase (ALP), aspartate transaminase (AST) and alanine transaminase (ALT) were then assayed.</p> <p>Results</p> <p>Arsenic concentrations in the subjects' hair and nails were positively correlated with arsenic levels in the drinking water. As regards the exposure-response relationship with arsenic in the drinking water, the respective activities of ALP, AST and ALT were found to be significantly increased in the high-exposure groups compared to the lowest-exposure groups before and after adjustments were made for different covariates. With internal exposure markers (arsenic in hair and nails), the ALP, AST and ALT activity profiles assumed a similar shape of dose-response relationship, with very few differences seen in the higher groups compared to the lowest group, most likely due to the temporalities of exposure metrics.</p> <p>Conclusions</p> <p>The present study demonstrated that arsenic concentrations in the drinking water were strongly correlated with arsenic concentrations in the subjects' hair and nails. Further, this study revealed a novel exposure- and dose- response relationship between arsenic exposure metrics and serum hepatic enzyme activity. Elevated serum hepatic enzyme activities in the higher exposure gradients provided new insights into arsenic-induced liver toxicity that might be helpful for the early prognosis of arsenic-induced liver diseases.</p

Optoelectronic characterization of CuInGa(S)2 thin films grown by spray pyrolysis for photovoltaic application

[EN] Copper-indium gallium disulfide (CIGS) is a good absorber for photovoltaic application. Thin films of CIGS were prepared by spray pyrolysis on glass substrates in the ambient atmosphere. The films were characterized by different techniques, such as structural, morphological, optical and electrical properties of CIGS films were analyzed by X-ray diffraction (XRD), scanning electron microscopy (SEM), atomic force microscopy (AFM), spectrophotometer and Hall effect, respectively. After optimization, the deposited films structure, grain size, and crystallinity became more important with an increase of annealing time at 370 degrees C for 20 min. Transmission electron microscopy (TEM) analysis shows that the interface sheets are well crystallized and the inter planer distance are 0.25 nm, 0.28 nm, and 0.36 nm. The atomic force microscopy (AFM) observation shows that the grain size and roughness can be tolerated by optimizing the annealing time. The strong absorbance and low transmittance were observed for the prepared films with a suitable energy bandgap about 1.46 eV. The Hall effect measurement system examined that CIGS films exhibited optimal electrical properties, resistivity, carrier mobility, and carrier concentration which were determined to be 4.22 x 10(6) omega cm, 6.18 x 10(2) cm(2) V-1 S-1 and 4.22 x 10(6) cm(-3), respectively. The optoelectronic properties of CIGS material recommended being used for the photovoltaic application.Prof. Bouchaib HARTITI, The Senior Associate at ICTP, is very grateful to ICTP for permanent support. Prof. Mohamed Ebn Touhami, Director of the University Center for Analysis, Expertise, Transfer of Technology and Incubation, Kenitra, Morocco, is very grateful to CUA2TI for financial support. Thanks to Doctor Diogo M.F. Santos for the supervision of Amal Bouich's work during her research in CeFEMA research center. The authors also thank researchers from CeFEMA (IST-ULisboa, Portugal) and CUA2TI (FS-Kenitra Morocco) for their help.Bouich, A.; Hartiti, B.; Ullah, S.; Ullah, H.; Ebn Touhami, M.; Santos, DMF.; Marí, B. (2019). Optoelectronic characterization of CuInGa(S)2 thin films grown by spray pyrolysis for photovoltaic application. Applied Physics A. 125(8):1-9. https://doi.org/10.1007/s00339-019-2874-4S191258T. Feurer, P. Reinhard, E. Avancini, B. Bissig, J. Löckinger, P. Fuchs, S. Buecheler, Progress in thin film CIGS photovoltaics–Research and development, manufacturing, and applications. Prog. Photovolt. Res. Appl. 25(7), 645–667 (2017)A. Zegadi, M.A. Slifkin, M. Djamin, A.E. Hill, R.D. Tomlinson, A photoacoustic study of CuInxGa1− xSe2 alloys. Phys. Status Solidi (A) 133(2), 533–540 (1992)T.H. Sajeesh, A.R. Warrier, C.S. Kartha, K.P. Vijayakumar, Optimization of parameters of chemical spray pyrolysis technique to get n and p-type layers of SnS. Thin Solid Films 518(15), 4370–4374 (2010)J. Liu, D. Zhuang, H. Luan, M. Cao, M. Xie, X. Li, Preparation of Cu (In, Ga) Se2 thin film by sputtering from Cu (In, Ga) Se2 quaternary target. Progr. Nat. Sci. Mater. Int. 23(2), 133–138 (2013)M.I. Hossain, Fabrication and characterization of CIGS solar cells with In2 S3 buffer layer deposited by PVD technique. Chalcogenide Lett. 9(5), 185–191 (2012)M.A. Mughal, R. Engelken, R. Sharma, Progress in indium (III) sulfide (In2S3) buffer layer deposition techniques for CIS, CIGS, and CdTe-based thin film solar cells. Sol. Energy 120, 131–146 (2015)M. Powalla, M. Cemernjak, J. Eberhardt, F. Kessler, R. Kniese, H.D. Mohring, B. Dimmler, Large-area CIGS modules: Pilot line production and new developments. Sol. Energy Mater Sol. Cells 90(18–19), 3158–3164 (2006)M.E. Calixto, P.J. Sebastian, R.N. Bhattacharya, R. Noufi, Compositional and optoelectronic properties of CIS and CIGS thin films formed by electrodeposition. Sol. Energy Mater. Sol. Cells 59(1–2), 75–84 (1999)S. Jung, S. Ahn, J.H. Yun, J. Gwak, D. Kim, K. Yoon, Effects of Ga contents on properties of CIGS thin films and solar cells fabricated by co-evaporation technique. Curr. Appl. Phys. 10(4), 990–996 (2010)S. R. Ovshinsky, X. Deng, R. Young, U.S. Patent No. 5,231,047. Washington, DC: U.S. Patent and Trademark Office (1993).M. Kaelin, D. Rudmann, A.N. Tiwari, Low cost processing of CIGS thin film solar cells. Sol. Energy 77(6), 749–756 (2004)Fangdan Jiang, Jiayou Feng, Effect of temperature on selenization process of metallic Cu–In alloy precursors. Thin Solid Films 515(4), 1950–1955 (2006)S. Shirakata, Y. Kannaka, H. Hasegawa, T. Kariya, S. Isomura, Properties of Cu (In, Ga) Se2 thin films prepared by chemical spray pyrolysis. Jpn. J. Appl. Phys. 38(9R), 4997 (1999)Y.K. Kumar, G.S. Babu, P.U. Bhaskar, V.S. Raja, Effect of starting-solution pH on the growth of Cu2ZnSnS4 thin films deposited by spray pyrolysis. Phys. Status Solidi (A) 206(7), 1525–1530 (2009)M. Ajili, M. Castagné, N.K. Turki, Characteristics of CuIn1− xGaxS2 thin films synthesized by chemical spray pyrolysis. J. Lumin. 150, 1–7 (2014)B.J. Babu, S. Velumani, A. Kassiba, R. Asomoza, J.A. Chavez-Carvayar, J. Yi, Deposition and characterization of graded Cu (In1-xGax) Se2 thin films by spray pyrolysis. Mater. Chem. Phys. 162, 59–68 (2015)S.F. Varol, G. Babür, G. Çankaya, U. Kölemen, Synthesis of sol–gel derived nano-crystalline ZnO thin films as TCO window layer: effect of sol aging and boron. RSC Adv. 4(100), 56645–56653 (2014)J.A. Frantz, R.Y. Bekele, V.Q. Nguyen, J.S. Sanghera, A. Bruce, S.V. Frolov, I.D. Aggarwal, Cu (In, Ga) Se2 thin films and devices sputtered from a single target without additional selenization. Thin Solid Films 519(22), 7763–7765 (2011)C. Calderón, G. Gordillo, P. Bartolo-Pérez, F. Mesa, Effect of the deposition conditions on the optical, morphological and compositional properties of CuIn1− xGaxSe2 thin films prepared by a multistage process. Revista Mexicana de Física 53(7), 270–273 (2007)D. Schmid, M. Ruckh, F. Grunwald, H.W. Schock, Chalcopyrite/defect chalcopyrite heterojunctions on the basis of CuInSe2. J. Appl. Phys. 73(6), 2902–2909 (1993)U.C. Matur, S. Akyol, N. Baydoğan, H. Cimenoglu, The optical properties of CIGS thin films derived by sol-gel dip coating process at different withdrawal speed. Proc. Soc. Behav. Sci. 195, 1762–1767 (2015)A. Bouich, B. Hartiti, S. Ullah, M.E. Touhami, B. Mari, D.M.F. Santos, Investigation of the optical properties of CuIn (Se, S)2 thin films for photovoltaic application. Mater. Today Proc. 13, 663–669 (2019)K. Matsumura, T. Fujita, H. Itoh, D. Fujita, Characterization of carrier concentration in CIGS solar cells by scanning capacitance microscopy. Meas. Sci. Technol. 25(4), 044020 (2014)A. Bouich, B. Hartiti, S. Ullah, H. Ullah, M.E. Touhami, D.M.F. Santos, B. Mari, Experimental, theoretical, and numerical simulation of the performance of CuInxGa(1–x) S2 based solar cells. Optik 183, 137–147 (2019