Statistical review of Remdesivir in adults with severe COVID-19 : a randomised, double-blind, placebo-controlled, multicentre trial

Publisher PD

Characterization of high finesse mirrors: loss, phase shifts and mode structure in an optical cavity

An extensive characterization of high finesse optical cavities used in cavity QED experiments is described. Different techniques in the measurement of the loss and phase shifts associated with the mirror coatings are discussed and their agreement shown. Issues of cavity field mode structure supported by the dielectric coatings are related to our effort to achieve the strongest possible coupling between an atom and the cavity.Comment: 8 pages, 4 figure

Air quality simulations for London using a coupled regional-to-local modelling system

A coupled regional-to-local modelling system comprising a regional chemistry–climate model with 5km horizontal resolution (EMEP4UK) and an urban dispersion and chemistry model with explicit road source emissions (ADMS-Urban) has been used to simulate air quality in 2012 across London. The study makes use of emission factors for NOx and NO2 and non-exhaust emission rates of PM10 and PM2.5 which have been adjusted compared to standard factors to reflect real-world emissions, with increases in total emissions of around 30% for these species. The performance of the coupled model and each of the two component models is assessed against measurements from background and near-road sites in London using a range of metrics concerning annual averages, high hourly average concentrations and diurnal cycles. The regional model shows good performance compared to measurements for background sites for these metrics, but under-predicts concentrations of all pollutants except O3 at near-road sites due to the low resolution of input emissions and calculations. The coupled model shows good performance at both background and near-road sites, which is broadly comparable with that of the urban model that uses measured concentrations as regional background, except for PM2.5 where the under-prediction of the regional model causes the coupled model to also under-predict concentrations. Using the coupled model, it is estimated that 13% of the area of London exceeded the EU limit value of 40µgm−3 for annual average NO2 in 2012, whilst areas of exceedances of the annual average limit values of 40 and 25µgm−3 for PM10 and PM2.5 respectively were negligible

Using task farming to optimise a street-scale resolution air quality model of the West Midlands (UK)

High resolution air quality models combining emissions, chemical processes, dispersion and dynamical treatments are necessary to develop effective policies for clean air in urban environments, but can have high computational demand. We demonstrate the application of task farming to reduce runtime for ADMS-Urban, a quasi-Gaussian plume air dispersion model. The model represents the full range of source types (point, road and grid sources) occurring in an urban area at high resolution. Here, we implement and evaluate the option to automatically split up a large model domain into smaller sub-regions, each of which can then be executed concurrently on multiple cores of a HPC or across a PC network, a technique known as task farming. The approach has been tested for a large model domain covering the West Midlands, UK (902 km2), as part of modelling work in the WM-Air (West Midlands Air Quality Improvement Programme) project. Compared to the measurement data, overall, the model performs well. Air quality maps for annual/subset averages and percentiles are generated. For this air quality modelling application of task farming, the optimisation process has reduced weeks of model execution time to approximately 35 h for a single model configuration of annual calculations

Spatial Distribution of Petroleum Hydrocarbons in Sediment Cores from Blind Pass, St. Pete Beach, Florida

One hundred and one sediment cores were collected to characterize the spatial distribution of petroleum hydrocarbons within and just outside Blind Pass, St. Pete Beach, Florida. Twenty-five percent of the cores exhibited levels of petroleum hydrocarbons above detection limits of the gas chromatograph/flame ionization detector (GC/FID) (0.01 mg/Kg), but at generally low concentrations. Petroleum hydrocarbon speciation studies of these samples (gas chromatography/mass spectroscopy [GC/MS]) indicate above-detection level (1 μg/Kg) petroleum hydrocarbons are similar to the non-volatile petroleum hydrocarbons found in a Bouchard 155 reference sample collected after the 1993 oil spill in the area, but are in a much degraded and weathered state. Individual petroleum hydrocarbons were, in all but one case, below the threshold effective level (TEL) described in the literature (MacDonald, 1994). The petroleum hydrocarbons were primarily found at 100-300 cm depth in Blind Pass cores. Above-detection level petroleum hydrocarbons were generally found in samples from cores in the center of the channel, near the edges of the shoal, and just outside of Blind Pass. A second mixture of hydrocarbons, primarily phthalates, ketones, and ether, was found at relatively shallow core depths (0-99 cm) in the Mid- and North End Channel cores. These suggest a separate source of contamination, possibly storm water runoff. The fuel fluorescence detector (FFD) probe was investigated for its ability to detect petroleum hydrocarbons in marine sediments. When analyzed with the FFD, all sediments from the cores produced peaks of fluorescence, but none above the background levels of Blind Pass native sediments. All but two samples analyzed by GC/FID were below the detection limits (100 ppm) of the FFD. These samples were found in dark-colored sediments. The combination of the detection limits of the instrument, sediment color, and the degraded nature of the heavier weight petroleum hydrocarbons may have resulted in fluorescence outputs below background levels. These studies demonstrate that the distribution of petroleum hydrocarbons within Blind Pass sediments is generally low and patchy. However, 25% of the cores exhibited levels above detection using GC/FID/MS. These cores could be subjected to individual speciation studies which indicate generally below TEL levels and an association of some, but not all, with the 1993 oil spill in Blind Pass. Appendix A provides photographs and tables for sediment subsamples which exhibited total petroleum hydrocarbon concentrations above detection limits, while Appendix B presents the results from fuel fluorescence detector probe analyses. A discussion of the results of the study in relation to sediment quality guidelines and soil cleanup target level guidance documents is included as Appendix C. Some preliminary results using the above techniques on core samples from the nearby John’s Pass are presented in Appendix D

Quantum manipulation and measurement of single atoms in optical cavity QED

Using laser-cooled atoms strongly coupled to a high finesse optical cavity, we have performed real-time continuous measurements of single atomic trajectories in terms of the interaction energy (Eint) with the cavity. Individual transit events reveal a shot-noise limited measurement (fractional) sensitivity of 4×10-4/√Hz to variations in Eint/&planck; within a bandwidth of 1300 kHz. The strong coupling of atom and cavity leads to a maximum interaction energy greater than the kinetic energy of an intracavity laser-cooled atom, even under weak cavity excitation. Evidence of mechanical light forces for intracavity photon number <1 has been observed. The quantum character of the nonlinear optical response of the atom-cavity system is manifested for the trajectory of a single atom

Evolution by Any Other Name: Antibiotic Resistance and Avoidance of the E-Word

The word "evolution" is rarely used in papers from medical journals describing antimicrobial resistance, which may directly impact public perception of the importance of evolutionary biology in our everyday lives