Mass hierarchy sensitivity of medium baseline reactor neutrino experiments with multiple detectors

We report the neutrino mass hierarchy (MH) sensitivity of medium baseline reactor neutrino experiments with multiple detectors. Sensitivity of determining the MH can be significantly improved by adding a near detector and combining both the near and far detectors. The size of the sensitivity improvement is related to accuracy of the individual mass-splitting measurements and requires strict control on the relative energy scale uncertainty of the near and far detectors. We study the impact of both baseline and target mass of the near detector on the combined sensitivity. A figure-of-merit is defined to optimize the baseline and target mass of the near detector and the optimal selections are $\sim$13~km and $\sim$4~kton respectively for a far detector with the 20~kton target mass and 52.5~km baseline. As typical examples of future medium baseline reactor neutrino experiments, the optimal location and target mass of the near detector are selected for JUNO and RENO-50. Finally, we discuss distinct effects of the neutrino spectrum uncertainty for setups of a single detector and double detectors, which indicate that the spectrum uncertainty can be well constrained in the presence of the near detector.Comment: 7 pages, 9 figure

Shot noise of spin current and spin transfer torque

We report the theoretical investigation of noise spectrum of spin current and spin transfer torque for non-colinear spin polarized transport in a spin-valve device which consists of normal scattering region connected by two ferromagnetic electrodes. Our theory was developed using non-equilibrium Green's function method and general non-linear $S^\sigma-V$ and $S^\tau-V$ relations were derived as a function of angle $\theta$ between magnetization of two leads. We have applied our theory to a quantum dot system with a resonant level coupled with two ferromagnetic electrodes. It was found that for the MNM system, the auto-correlation of spin current is enough to characterize the fluctuation of spin current. For a system with three ferromagnetic layers, however, both auto-correlation and cross-correlation of spin current are needed to characterize the noise spectrum of spin current. Furthermore, the spin transfer torque and the torque noise were studied for the MNM system. For a quantum dot with a resonant level, the derivative of spin torque with respect to bias voltage is proportional to $\sin\theta$ when the system is far away from the resonance. When the system is near the resonance, the spin transfer torque becomes non-sinusoidal function of $\theta$. The derivative of noise spectrum of spin transfer torque with respect to the bias voltage $N_\tau$ behaves differently when the system is near or far away from the resonance. Specifically, the differential shot noise of spin transfer torque $N_\tau$ is a concave function of $\theta$ near the resonance while it becomes convex function of $\theta$ far away from resonance. For certain bias voltages, the period $N_\tau(\theta)$ becomes $\pi$ instead of $2\pi$. For small $\theta$, it was found that the differential shot noise of spin transfer torque is very sensitive to the bias voltage and the other system parameters.Comment: 15pages, 6figure

Tuning the Dzyaloshinskii-Moriya Interaction in Pt/Co/MgO heterostructures through MgO thickness

The interfacial Dzyaloshinskii-Moriya interaction (DMI) in the ferromagnetic/heavy metal ultra-thin film structures , has attracted a lot of attention thanks to its capability to stabilize Neel-type domain walls (DWs) and magnetic skyrmions for the realization of non-volatile memory and logic devices. In this study, we demonstrate that magnetic properties in perpendicularly magnetized Ta/Pt/Co/MgO/Pt heterostructures, such as magnetization and DMI, can be significantly influenced through both the MgO and the Co ultrathin film thickness. By using a field-driven creep regime domain expansion technique, we find that non-monotonic tendencies of DMI field appear when changing the thickness of MgO and the MgO thickness corresponding to the largest DMI field varies as a function of the Co thicknesses. We interpret this efficient control of DMI as subtle changes of both Pt/Co and Co/MgO interfaces, which provide a method to investigate ultra-thin structures design to achieve skyrmion electronics.Comment: 18 pages, 11 figure

Translation Standards and Strategies for Trademark Names of Cosmetics

With the development of the society and the improvement of the people's living standard, people have gradually realized the importance of the external image while paying attention to the "inner beauty", so the cosmetics are becoming more and more popular. Proper brand name translation can not only bring consumers the feeling of beauty, but also enhance the brand level and promote products in the invisible way. This paper discusses the translation criteria and Strategies of cosmetic brand names, hoping to contribute to the development of this field

Room temperature chiral magnetic skyrmion in ultrathin magnetic nanostructures

Magnetic skyrmions are chiral spin structures with a whirling configuration. Their topological properties, nanometer size and the fact that they can be moved by small current densities have opened a new paradigm for the manipulation of magnetisation at the nanoscale. To date, chiral skyrmion structures have been experimentally demonstrated only in bulk materials and in epitaxial ultrathin films and under external magnetic field or at low temperature. Here, we report on the observation of stable skyrmions in sputtered ultrathin Pt/Co/MgO nanostructures, at room temperature and zero applied magnetic field. We use high lateral resolution X-ray magnetic circular dichroism microscopy to image their chiral N\'eel internal structure which we explain as due to the large strength of the Dzyaloshinskii-Moriya interaction as revealed by spin wave spectroscopy measurements. Our results are substantiated by micromagnetic simulations and numerical models, which allow the identification of the physical mechanisms governing the size and stability of the skyrmions.Comment: Submitted version. Extended version to appear in Nature Nanotechnolog

Research on the Third-party Payment Risk in the Background of Nets Union Clearing Platform: The Case of Alipay

Third-party payment has become an important part of the current payment method in China. However, there are many risks associated with the development of the third-party payment network. The establishment of the Nets Union in 2017 had a significant impact on the standardization of the entire third-party payment market. By further researching the third-party payment risk under the background of Nets Union Clearing Platform, combining with the empirical analysis for the case of Alipay, this paper constructs the third-party payment risk model by AHP and fuzzy comprehensive evaluation, then making some recommendations for Third-party payment risk control management

Chain-of-Thought Prompting of Large Language Models for Discovering and Fixing Software Vulnerabilities

Security vulnerabilities are increasingly prevalent in modern software and they are widely consequential to our society. Various approaches to defending against these vulnerabilities have been proposed, among which those leveraging deep learning (DL) avoid major barriers with other techniques hence attracting more attention in recent years. However, DL-based approaches face critical challenges including the lack of sizable and quality-labeled task-specific datasets and their inability to generalize well to unseen, real-world scenarios. Lately, large language models (LLMs) have demonstrated impressive potential in various domains by overcoming those challenges, especially through chain-of-thought (CoT) prompting. In this paper, we explore how to leverage LLMs and CoT to address three key software vulnerability analysis tasks: identifying a given type of vulnerabilities, discovering vulnerabilities of any type, and patching detected vulnerabilities. We instantiate the general CoT methodology in the context of these tasks through VSP , our unified, vulnerability-semantics-guided prompting approach, and conduct extensive experiments assessing VSP versus five baselines for the three tasks against three LLMs and two datasets. Results show substantial superiority of our CoT-inspired prompting (553.3%, 36.5%, and 30.8% higher F1 accuracy for vulnerability identification, discovery, and patching, respectively, on CVE datasets) over the baselines. Through in-depth case studies analyzing VSP failures, we also reveal current gaps in LLM/CoT for challenging vulnerability cases, while proposing and validating respective improvements

Dzyaloshinskii-Moriya interaction and magnetic skyrmions induced by curvature

Realizing sizeable Dzyaloshinskii-Moriya interaction (DMI) in intrinsic two-dimensional (2D) magnets without any manipulation will greatly enrich potential application of spintronics devices. The simplest and most desirable situation should be 2D magnets with intrinsic DMI and intrinsic chiral spin textures. Here, we propose to realize DMI by designing periodic ripple structures with different curvatures in low-dimensional magnets and demonstrate the concept in both one-dimensional (1D) CrBr2 and two-dimensional (2D) MnSe2 magnets by using first-principles calculations. We find that DMIs in curved CrBr2 and MnSe2 can be efficiently controlled by varying the size of curvature c, where c is defined as the ratio between the height h and the length l of curved structure. Moreover, we unveil that the dependence of first-principles calculated DMI on size of curvature c can be well described by the three-site Fert-L\'evy model. At last, we uncover that field-free magnetic skyrmions can be realized in curved MnSe2 by using atomistic spin model simulations based on first-principles calculated magnetic parameters. The work will open a new avenue for inducing DMI and chiral spin textures in simple 2D magnets via curvature.Comment: Published on Physical Review B 106, 05442

Factor analyses of a social support scale using two methods

Purpose: Evaluation and comparison of the factor structure of the Medical Outcomes Study Social Support Survey (MOS-SSS) using both confirmatory factor analysis (CFA) and exploratory factor analysis (EFA) with two samples of people living with HIV/AIDS in China. Methods: Secondary analyses were conducted with data from two comparable samples of 320 people living with HIV/AIDS from the same hospital using the same inclusion criteria. The first sample of 120 was collected in 2006, and the second sample of 200 was collected in 2012. For each sample, CFA was first performed on the original four-factor structure to check model fit, followed by EFA to explore other factor structures and a subsequent CFA for model fit statistics to be compared to the original four-factor CFA. Results: In both samples, CFA on the originally hypothesized four-factor structure yielded an acceptable model fit. The EFA yielded a two-factor solution in both samples, with different items included in each factor for the two samples. Comparison of CFA on the a priori four-factor structure and the new two-factor structure in both samples indicated that both factor structures were of acceptable model fit, with the four-factor model performing slightly better than the two-factor model. Conclusion: Factor structure of the MOS-SSS is method-dependent, with CFA supporting a four-factor structure, while EFA yielded a two-factor structure in two separate samples. We need to be careful in selecting the analytic method when applying the MOS-SSS to various samples and choose the factor structure that best fits the theoretical model