164 research outputs found
Idiopathic Ventricular Arrhythmias Originating From the Pulmonary Sinus Cusp Prevalence, Electrocardiographic/Electrophysiological Characteristics, and Catheter Ablation
AbstractBackgroundIdiopathic ventricular arrhythmias (VAs) originating from the pulmonary sinus cusp (PSC) have not been sufficiently clarified.ObjectivesThe goal of this study was to investigate the prevalence, electrocardiographic characteristics, mapping, and ablation of idiopathic VAs arising from the PSC.MethodsData were analyzed from 218 patients undergoing successful endocardial ablation of idiopathic VAs with a left bundle branch block morphology and inferior axis deviation.ResultsTwenty-four patients had VAs originating from the PSC. In the first 7 patients, initial ablation performed in the right ventricular outflow tract failed to abolish the clinical VAs but produced a small change in the QRS morphology in 3 patients. In all 24 patients, the earliest activation was eventually identified in the PSC, at which a sharp potential was observed preceding the QRS complex onset by 28.2 ± 2.9 ms. The successful ablation site was in the right cusp (RC) in 10 patients (42%), the left cusp (LC) in 8 (33%), and the anterior cusp (AC) in 6 (25%). Electrocardiographic analysis showed that RC-VAs had significantly larger R-wave amplitude in lead I and a smaller aVL/aVR ratio of Q-wave amplitude compared with AC-VAs and LC-VAs, respectively. The R-wave amplitude in inferior leads was smaller in VAs localized in the RC than in the LC but did not differ between VAs from the AC and LC.ConclusionsVAs arising from the PSC are not uncommon, and RC-VAs have unique electrocardiographic characteristics. These VAs can be successfully ablated within the PSC
Gait analysis for designing a new assistive knee brace
Assistive knee brace is a species of wearable lower extremity exoskeletons. In this research, an assistive knee brace was developed by integrating a multifunctional actuator with a custom-made knee-ankle-foot orthosis. In the study, the location of the actuator is moved up to the lateral side of the hip, instead of knee joint. Waist belt and shoulder belt are appended on the knee brace. This paper aimed to improve the design of the assistive knee braces through gait analysis. By walking with the knee braces, the spatial and temporal gait parameters, joint kinematics and joint kinetics parameters were evaluated, and the changes from normal walking were compared as well. The experimental results showed that walking with the developed knee brace provided minimal hindrance to the wearer. © 2011 IEEE
Experimental studies on kinematics and kinetics of walking with an assistive knee brace
Assistive knee brace is a species of wearable lower extremity exoskeletons. Such assistive equipment can enhance people's strength and provide desired locomotion to have advantages over wheelchairs, which are commonly used for patients with mobility disorders. However, the integration between the assistive knee brace and the user is challenging as inaccurate alignments may adversely affect the biomechanics of the knee joint. The goal of this study is to evaluate the changes between normal walking and walking with an assistive knee brace in "off" mode. The assistive knee brace was developed by integrating a multifunctional actuator with a custom-made knee-ankle-foot orthosis in order to minimize excessive shifting and to improve alignment to the knee joint. Spatial and temporal gait parameters, joint kinematics and joint kinetics parameters were compared. In general, the observed results showed that most of the gait parameters were not affected when walking with the knee brace. The only significant differences were found in knee flexion and knee rotational motions. These results indicated that walking with the developed knee brace provided minimal hindrance to the user and assured that assistive torque can be applied to the knee joint
A Real-Time Layer-Adaptive Wavelet Transform Energy Distribution Strategy in a Hybrid Energy Storage System of EVs
In this paper, a real-time energy distribution strategy is designed by a layer-adaptive wavelet transform algorithm and proposed to meet the load power demand while distributing the high-frequency component to supercapacitors and the low-frequency component to batteries in a hybrid energy storage system. In the proposed method, the number of decomposition layers of wavelet transform corresponding to the load power is adaptively determined by dividing the operation zone of supercapacitors into eight cases to respectively distribute the low frequency component to batteries and the remaining high frequency component to supercapacitors. Firstly, since the state of charge of supercapacitors decreases faster as the decomposition layers increases, the state of charge of supercapacitors is divided into eight cases of operation zones. Secondly, since supercapacitors act as the peak power buffer unit, the corresponding number of decomposition layers is finally adaptively determined according to the operation zone of supercapacitors. An experiment testbed is built to verify the effectiveness of the proposed method. Extensive experiment results show that the proposed method provides a better real-time energy sharing between supercapacitors and batteries when compared with the conditional method.
Document type: Articl
Genetic dissection of QTLs for oil content in four maize DH populations
Oil is one of the main components in maize kernels. Increasing the total oil content (TOC) is favorable to optimize feeding requirement by improving maize quality. To better understand the genetic basis of TOC, quantitative trait loci (QTL) in four double haploid (DH) populations were explored. TOC exhibited continuously and approximately normal distribution in the four populations. The moderate to high broad-sense heritability (67.00-86.60%) indicated that the majority of TOC variations are controlled by genetic factors. A total of 16 QTLs were identified across all chromosomes in a range of 3.49-30.84% in term of phenotypic variation explained. Among them, six QTLs were identified as the major QTLs that explained phenotypic variation larger than 10%. Especially, qOC-1-3 and qOC-2-3 on chromosome 9 were recognized as the largest effect QTLs with 30.84% and 21.74% of phenotypic variance, respectively. Seventeen well-known genes involved in fatty acid metabolic pathway located within QTL intervals. These QTLs will enhance our understanding of the genetic basis of TOC in maize and offer prospective routes to clone candidate genes regulating TOC for breeding program to cultivate maize varieties with the better grain quality
Graphene/silicon heterojunction for reconfigurable phase-relevant activation function in coherent optical neural networks
Optical neural networks (ONNs) herald a new era in information and
communication technologies and have implemented various intelligent
applications. In an ONN, the activation function (AF) is a crucial component
determining the network performances and on-chip AF devices are still in
development. Here, we first demonstrate on-chip reconfigurable AF devices with
phase activation fulfilled by dual-functional graphene/silicon (Gra/Si)
heterojunctions. With optical modulation and detection in one device, time
delays are shorter, energy consumption is lower, reconfigurability is higher
and the device footprint is smaller than other on-chip AF strategies. The
experimental modulation voltage (power) of our Gra/Si heterojunction achieves
as low as 1 V (0.5 mW), superior to many pure silicon counterparts. In the
photodetection aspect, a high responsivity of over 200 mA/W is realized.
Special nonlinear functions generated are fed into a complex-valued ONN to
challenge handwritten letters and image recognition tasks, showing improved
accuracy and potential of high-efficient, all-component-integration on-chip
ONN. Our results offer new insights for on-chip ONN devices and pave the way to
high-performance integrated optoelectronic computing circuits
Multiple biomarkers and arrhythmia outcome following catheter ablation of atrial fibrillation: The Guangzhou Atrial Fibrillation Project.
BackgroundBiomarkers have been related to the arrhythmia recurrence following catheter ablation (CA) of atrial fibrillation (AF). We hypothesized that concurrent measurement of several biomarkers would additively improve their predictive value.MethodsOne thousand four hundred and ten consecutive AF patients (68% male; 57.2 ± 11.6 years) undergoing CA were enrolled. Baseline characteristics, serum B type brain natriuretic peptide (BNP) and high sensitivity C reactive protein (hsCRP), estimated glomerular filtration rate (eGFR), ablation parameters, arrhythmia data at discharge, 1, 3, 6, and then every 6 months post CA were collected. Follow-up ended when arrhythmia recurred or until 31st December 2016.ResultsThree hundred and sixty-five (25.9%) patients had arrhythmia recurrence post-CA during a mean follow-up of 20.7 ± 8.8 months. BNP, hsCRP, and eGFR levels and their cut-off values of 237.45 pg/mL, 1.6 mg/dL, and 82.5 mL/min/1.73 m2 were good predictors for AF recurrence (all P P P ConclusionMeasurement of BNP, CRP, and eGFR were incrementally additive to clinical risk factors in a cumulative manner to improve prediction of arrhythmia recurrence post-CA of AF. The implications of poor arrhythmia outcome in AF patients with multiple abnormal biomarkers pre-CA procedure may help with patient selection and inform the likelihood of success or the need of more complicated CA procedure(s)
Broadband Linear-Dichroic Photodetector in a Black Phosphorus Vertical p-n Junction
The ability to detect light over a broad spectral range is central for
practical optoelectronic applications, and has been successfully demonstrated
with photodetectors of two-dimensional layered crystals such as graphene and
MoS2. However, polarization sensitivity within such a photodetector remains
elusive. Here we demonstrate a linear-dichroic broadband photodetector with
layered black phosphorus transistors, using the strong intrinsic linear
dichroism arising from the in-plane optical anisotropy with respect to the
atom-buckled direction, which is polarization sensitive over a broad bandwidth
from 400 nm to 3750 nm. Especially, a perpendicular build-in electric field
induced by gating in black phosphorus transistors can spatially separate the
photo-generated electrons and holes in the channel, effectively reducing their
recombination rate, and thus enhancing the efficiency and performance for
linear dichroism photodetection. This provides new functionality using
anisotropic layered black phosphorus, thereby enabling novel optical and
optoelectronic device applications.Comment: 18 pages, 5 figures in Nature Nanotechnology 201
Potential of Core-Collapse Supernova Neutrino Detection at JUNO
JUNO is an underground neutrino observatory under construction in Jiangmen, China. It uses 20kton liquid scintillator as target, which enables it to detect supernova burst neutrinos of a large statistics for the next galactic core-collapse supernova (CCSN) and also pre-supernova neutrinos from the nearby CCSN progenitors. All flavors of supernova burst neutrinos can be detected by JUNO via several interaction channels, including inverse beta decay, elastic scattering on electron and proton, interactions on C12 nuclei, etc. This retains the possibility for JUNO to reconstruct the energy spectra of supernova burst neutrinos of all flavors. The real time monitoring systems based on FPGA and DAQ are under development in JUNO, which allow prompt alert and trigger-less data acquisition of CCSN events. The alert performances of both monitoring systems have been thoroughly studied using simulations. Moreover, once a CCSN is tagged, the system can give fast characterizations, such as directionality and light curve
- …