165 research outputs found
Valley current characterization of high current density resonant tunnelling diodes for terahertz-wave applications
We report valley current characterisation of high current density InGaAs/AlAs/InP resonant tunnelling diodes (RTDs) grown by metal-organic vapour phase epitaxy (MOVPE) for THz emission, with a view to investigate the origin of the valley current and optimize device performance. By applying a dual-pass fabrication technique, we are able to measure the RTD I-V characteristic for different perimeter/area ratios, which uniquely allows us to investigate the contribution of leakage current to the valley current and its effect on the PVCR from a single device. Temperature dependent (20 – 300 K) characteristics for a device are critically analysed and the effect of temperature on the maximum extractable power (PMAX) and the negative differential conductance (NDC) of the device is investigated. By performing theoretical modelling, we are able to explore the effect of typical variations in structural composition during the growth process on the tunnelling properties of the device, and hence the device performance
High Input Resistance Terahertz Dipole Antenna With an Isolating Photonic Band Gap Layer
A terahertz dipole antenna with a high input resistance is proposed by minimizing the effects of the supporting GaAs substrate using a two dimensional photonic band gap (PBG) layer. In additio, special attentions have been given to the choice of PBG unit cell dimensions so that the photo-mixer is illuminated by the two laser beams with no obstruction. An electromagnetic simulator has been used to optimize the antenna, and its resistance is ~2.7kΩ
Improved Temperature Performance of 1.31-mu/m Quantum Dot Lasers by Optimized Ridge Waveguide Design
In this letter, we demonstrate the importance of the fabricated device structure for the external differential efficiency, threshold current density, and maximum operating temperature for ground state operation of a 1.31-mu/m quantum dot laser. The introduction of a shallow ridge etch design and selective electroplating of the gold bondpads is demonstrated to offer improved performance in comparison to a deep ridge etch design with thinner evaporated gold bondpads
Study of electro-absorption effects in 1300nm In(Ga)As/GaAs quantum dot materials
No abstract available
GaAs-based Self-Aligned Stripe Superluminescent Diodes Processed Normal to the Cleaved Facet
We demonstrate GaAs-based superluminescent diodes (SLDs) incorporating a window-like back facet in a self-aligned stripe. SLDs are realised with low spectral modulation depth (SMD) at high power spectral density, without application of anti-reflection coatings. Such application of a window-like facet reduces effective facet reflectivity in a broadband manner. We demonstrate 30mW output power in a narrow bandwidth with only 5% SMD, outline the design criteria for high power and low SMD, and describe the deviation from a linear dependence of SMD on output power as a result of Joule heating in SLDs under continuous wave current injection. Furthermore, SLDs processed normal to the facet demonstrate output powers as high as 20mW, offering improvements in beam quality, ease of packaging and use of real estate. © (2016) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only
Quantum well and dot self-aligned stripe lasers utilizing an InGaP optoelectronic confinement layer
We demonstrate and study a novel process for fabrication of GaAs-based self-aligned lasers based upon a single over-growth. A lattice-matched n-doped InGaP layer is utilized for both electrical and optical confinements. Single-lateral-mode emission is demonstrated initially from an In0.17Ga0.83 As double quantum well laser emitting similar to 980 nm. We then apply the fabrication technique to a quantum dot laser emitting similar to 1300 nm. Furthermore, we analyze the breakdown mechanism in our devices and discuss the limitations of index guiding in our structures
High-performance three-layer 1.3-/spl mu/m InAs-GaAs quantum-dot lasers with very low continuous-wave room-temperature threshold currents
The combination of high-growth-temperature GaAs spacer layers and high-reflectivity (HR)-coated facets has been utilized to obtain low threshold currents and threshold current densities for 1.3-/spl mu/m multilayer InAs-GaAs quantum-dot lasers. A very low continuous-wave (CW) room-temperature threshold current of 1.5 mA and a threshold current density of 18.8 A/cm/sup 2/ are achieved for a three-layer device with a 1-mm HR/HR cavity. For a 2-mm cavity, the CW threshold current density is as low as 17 A/cm/sup 2/ for an HR/HR device. An output power as high as 100 mW is obtained for a device with HR/cleaved facets
Simulation of Broad Spectral Bandwidth Emitters at 1060 nm for Optical Coherence Tomography
The simulation of broad spectral bandwidth light sources (semiconductor optical amplifiers (SOA) and superluminescent diodes (SLD)) for application in ophthalmic optical coherence tomography is reported. The device requirements and origin of key device parameters are outlined, and a range of single and double InGaAs/GaAs quantum well (QW) active elements are simulated with a view to application in different OCT embodiments. We confirm that utilising higher order optical transitions is beneficial for single QW SOAs, but may introduce deleterious spectral modulation in SLDs. We show how an addition QW may be introduced to eliminate this spectral modulation, but that this results in a reduction of the gain spectrum width. We go on to explore double QW structures where the roles of the two QWs are reversed, with the narrow QW providing long wavelength emission and gain. We show how this modification in the density of states results in a significant increase in gain-spectrum width for a given current. © (2016) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only
Optimization of High Current Density Resonant Tunneling Diodes for Terahertz Emitters
We discuss the numerical simulation of high
current density InGaAs/AlAs/InP resonant tunneling diodes with
a view to their optimization for application as THz emitters. We
introduce a figure of merit based upon the ratio of maximum
extractable THz power and the electrical power developed in the
chip. The aim being to develop high efficiency emitters as output
power is presently limited by catastrophic failure. A description
of the interplay of key parameters follows. We propose an
optimized structure utilizing thin barriers paired with a
comparatively wide quantum well
Model- and calibration-independent test of cosmic acceleration
We present a calibration-independent test of the accelerated expansion of the
universe using supernova type Ia data. The test is also model-independent in
the sense that no assumptions about the content of the universe or about the
parameterization of the deceleration parameter are made and that it does not
assume any dynamical equations of motion. Yet, the test assumes the universe
and the distribution of supernovae to be statistically homogeneous and
isotropic. A significant reduction of systematic effects, as compared to our
previous, calibration-dependent test, is achieved. Accelerated expansion is
detected at significant level (4.3 sigma in the 2007 Gold sample, 7.2 sigma in
the 2008 Union sample) if the universe is spatially flat. This result depends,
however, crucially on supernovae with a redshift smaller than 0.1, for which
the assumption of statistical isotropy and homogeneity is less well
established.Comment: 13 pages, 2 figures, major change
- …