165 research outputs found

    Editorial for special issue “Gravity concentration”

    Get PDF
    Resumo não disponível

    MINERAL CONTAMINANTS OF THE SEDIMENTARY KAOLIN ORE FROM IPIXUNA MINE, BRAZIL

    Get PDF
    The sedimentary kaolin ore of the Ipixuna Mine, in the Brazilian Amazon, contains mineral contaminants such as anatase, hematite and goethite, among others, which change the original white color of kaolin blocks to red, yellow, gray and purple. The main objective of the present study was to identify the mineral contaminants in the ROM kaolin, the textures and their relationships with the deposition environment. Binocular stereomicroscopy and X-ray diffraction were used to define the paragenesis of contaminants from different places of the ore, as well as to characterize the deposition conditions. The contaminants change the white color of kaolin ore to red, yellow, gray and purple. Red is associated with disseminated goethite and hematite in the kaolin ore. Yellow is associated with disseminated quartz, muscovite and anatase in the kaolin ore. Gray results from thin kaolinite multilayers containing low and high concentrations of anatase. Purple results from the disseminated hematite in the kaolin ore.Minerais contaminantes do minério de caulim sedimentar da Mina Ipixuna, Brasil. O minério de caulim sedimentar da mina Ipixuna, na Amazônia brasileira, contém minerais contaminantes, tais como anatásio, hematita e goetita, entre outros, cujas ocorrências alteram a cor branca original de blocos de caulim para vermelha, cinza e roxa. O principal objetivo do presente estudo foi identificar os minerais contaminantes do minério ROM de caulim, as texturas e suas relações com o ambiente de deposição. Análises por estereomicroscopia binocular e difração de raios-x permitiram definir a paragênese mineral dos contaminantes em diversas áreas do corpo de minério, bem como caracterizar as condições de deposição. Os minerais contaminantes alteram a cor branca do minério para vermelha, amarela, cinza e roxa. A cor vermelha é associada com goetita e hematita disseminada no minério de caulim. A cor amarela é associada com quartzo, muscovita e anatásio disseminados no minério de caulim. A cor cinza é associada com finas multicamadas de caulinita contendo baixas e altas concentrações de anatásio. A cor roxa resulta da disseminação de hematita no minério de caulim

    A sorting method to value recycled concrete

    Get PDF
    The purpose of this paper is to propose a sorting platform to increase the quality of recycled aggregates through the supplementary use of mineral processing techniques and additional sorting. The difficulty of liberation is discussed, and the methodology currently used in mineral processing is proposed. Jigs, hydrocyclones and sensor-based sorting are considered to have good performance in the sorting of adequately recycled aggregates. The new perspectives on sorting and liberation for recycling aggregates are discussed. The new process is presented based on the current process in recycling platforms, with supplementary sorting of the recycled concrete. The gain in density and the reduction in water absorption are studied. The relation between the water content and the density of aggregates is analysed for three quality levels of recycled aggregates. The gain in density and the reduction in water absorption were linked to the aggregate replacement rates. The reduction in transport and discharge costs due to the increased aggregate quality was linked to the aggregate replacement rate and distance to quarry. In our study, replacing a lower-quality aggregate with another of medium quality leads to an expected density gain of approximately 4%. Conversely, if replaced by superior quality aggregate, the expected gain will be 8.4%. As a consequence, a 34% reduction in water absorption could also be obtained. The cost reduction is exponential with the substitution rate of recycled materials. There is a decrease in transport costs if the quality of recycled aggregates increases. Conversely, if the reduction in transport costs when the quality of recycled aggregates increases is considered, the distance between the demolition site and quarry is not important

    Fire resistance performance of concrete-PVC panels with polyvinyl chloride (PVC) stay in place (SIP) formwork

    Get PDF
    Stay-in-place (SIP) formwork is a more-practical alternative to traditional steel or wood formworks due to its improved constructability and durability. The aim of this paper was to study the fire resistance performances of structural and non-structural concrete panels with polyvinyl chloride (PVC) SIP formwork. Three 124.01 in¿×¿110.24 in¿×¿3.15 in panels of PVC SIP formwork were tested and compared to one another. All panels were aged for 28 days, then exposed to the standard fire curve based on the ISO 834:2014 standard, and the temperatures in each panel surface recorded. The results indicate that concrete strength significantly influenced the structural stability and the fire resistance time of the panels (under load), even in this type of panels when exposed to high temperatures. It was found that the PVC encasement enhanced the thermal insulation property, one of the fire resistance performance criteria. Overall, the importance of this alternative formwork is the reduction in the use of forest resources, the raise of awareness of their conservation, and the promotion of their rational use as this a material is friendly to the environment.Peer ReviewedPostprint (published version

    Adsorption and recovery of phosphate from aqueous solution by the construction and demolition wastes sludge and its potential use as phosphate-based fertiliser

    Get PDF
    This study aimed to investigate phosphate removal from aqueous effluents by an inorganic sludge from the inert part of construction and demolition wastes (CSW) as adsorbent. It is also discussed the application of the loaded P adsorbent as potential fertiliser. The CSW was also thermally treated at 800¿°C for 2¿h (CSW-T), and its influence in the P removal was also investigated. The characterisation techniques highlighted low porosity on CSW and CSW-T adsorbents and that they are mainly formed by oxides which could enhance the P uptake and recovery. In pH experiments, P adsorption increased as initial pH increased, at pH higher than 7.8 the P removal sharply increased due to the formation of calcium phosphate precipitate. The mechanism of the P adsorption onto CSW indicated that the process was mainly controlled by chemical bonding or chemisorption. The results showed that CSW-T was more effective for P removal in comparison to CSW based on the Liu isotherm, the maximum sorption capacity attained was 24.04 (CSW) and 57.64¿mg¿g-1 (CSW-T). Based on the Avrami’s kinetic models, the time for attaining 95% of saturation was 212.6 (CSW), and 136.6¿min (CSW-T). CSW and CSW-T showed the highest phosphate-removal performance among many adsorbents found in the literature; therefore, this kind of waste can be used widely as an inexpensive phosphate-recovery adsorbent. Besides, the P loaded adsorbents could be used as potential fertilisers which could be an interesting and efficient way of reuse for this waste.Peer ReviewedPostprint (published version

    Current Applications of Recycled Aggregates from Construction and Demolition: A Review

    Get PDF
    A literature review comprising 163 publications published over a period of 26 years from 1992 to 2018 is presented in this paper. This review discusses the generation and recycling of construction and demolition waste (CDW) as well as its main uses as raw materials for the construction engineering sector. This review pays attention to the use of CDW aggregates for sand, pavements/roads, bricks, ceramics, cementitious materials, and concrete productions, as well its uses as eco-friendly materials for water decontamination. The physical-chemical and mechanical characteristics of recycled aggregates play an important role in their correctly chosen applications. The results found in this literature survey allow us to conclude that recycled aggregates from CDW can be successfully used to produce construction materials with quality comparable to those produced with natural aggregates. We concluded that the use of CDWs as raw materials for manufacturing new construction materials is technically feasible, economical, and constitutes an environmentally friendly approach for a future construction and demolition waste management strategy

    Ore processing technologies applied to industrial waste decontamination: a case study

    Get PDF
    Peer ReviewedObjectius de Desenvolupament Sostenible::12 - Producció i Consum Responsables::12.2 - Per a 2030, assolir la gestió sostenible i l’ús eficient dels recursos naturalsObjectius de Desenvolupament Sostenible::12 - Producció i Consum ResponsablesPostprint (published version

    Utilização de jigues a ar na concentração de resíduos de construção e demolição

    Get PDF
    Resíduos de construção e demolição são um dos principais resíduos sólidos gerados em centros urbanos em todo o mundo. Normalmente, parte deles são utilizados, após cominuição e classificação granulométrica, sem nenhum processo de separação ou concentração. Eles podem ser usados como agregados em concreto de baixa resistência, em sub-bases de estradas, ou em outras utilizações com baixo valor agregado. O presente trabalho apresenta estudos de separação e concentração em jigues a ar dos diferentes materiais presentes nestes resíduos.Peer ReviewedObjectius de Desenvolupament Sostenible::9 - Indústria, Innovació i InfraestructuraPostprint (published version

    Some observations on the influence of particle size and size distributionon stratification in pneumatic jigs

    Get PDF
    Particle size variation plays a key role in jigging performance, and despite extensive research in the area, very little attention has been given in the case of pneumatic jigging. The aim of this study was to look into particle stratification in a pilot-scale pneumatic jig when varying the particle size and the range of the particle size distribution in ternary mixtures of aggregates. Jigging tests were especially designed to reduce contamination of jig products and a stratification index was elaborated to evaluate stratification efficiency. Experimental results provided compelling evidences that widening the particle size distribution of the system or using beds composed of particles of smaller sizes can enhance stratification by density. Similarly, smaller particles showed a remarkable tendency to concentrate in the upper zones of the stratified bed, whereas larger particles tended to concentrate more in lower zones. The obtained results suggest that particular operating features of pneumatic jigging together with differential packing effects should play a decisive role in the stratification extent of beds formed by particles of different sizes. Experimental results are of practical importance since, among other benefits, they point to the possibility to increase pneumatic jigging performance in some cases by using wider size distributions of the feed, thus reducing the need of prior stages of narrow size classification
    corecore