Standard-M mobile satellite terminal employing electronic beam squint tracking

In recent years, extensive experience has been built up at the University of Bristol in the use of the Electronic Beam Squint (EBS) tracking technique, applied to large earth station facilities. The current interest in land mobile satellite terminals, using small tracking antennas, has prompted the investigation of the applicability of the EBS technique to this environment. The development of an L-band mechanically steered vehicle antenna is presented. A description of the antenna is followed by a detailed investigation of the tracking environment and its implications on the error detection capability of the system. Finally, the overall hardware configuration is described along with plans for future work

Promoting middle school students’ proportional reasoning skills through an ongoing professional development programme for teachers

© 2016, Springer Science+Business Media Dordrecht. Proportional reasoning, the ability to use ratios in situations involving comparison of quantities, is essential for mathematical competence, especially in the middle school years, and is an important determinant of success beyond school. Research shows students find proportional reasoning and its foundational concepts difficult. Proportional reasoning does not always develop naturally, however some research suggests that with targeted teaching, its development can be promoted. This paper reports on a large Australian study involving over 130 teachers and their students. A major goal of the study was to investigate the efficacy of ongoing teacher professional development for promoting middle years students’ proportional reasoning. A series of professional development workshops was designed to enhance the teachers’ understanding of proportional reasoning and to extend their repertoire of teaching strategies to promote their students’ proportional reasoning skills. The workshop design was informed by research literature on proportional reasoning teaching and learning as well as the results of a diagnostic instrument administered to over 2500 middle years students prior to the professional development. Between workshops, the teachers implemented a variety of targeted teaching activities. This paper reports on pre- and post- instrument student data collected at the beginning and end of the first year of the project (i.e., after completion of half of the workshops). The findings suggest that targeted professional development and explicit teaching can make a difference to students’ proportional reasoning

The analysis of reactively loaded microstrip antennas by finite difference time domain modelling

In recent years, much interest has been shown in the use of printed circuit antennas in mobile satellite and communications terminals at microwave frequencies. Although such antennas have many advantages in weight and profile size over more conventional reflector/horn configurations, they do, however, suffer from an inherently narrow bandwidth. A way of optimizing the bandwidth of such antennas by an electronic tuning technique using a loaded probe mounted within the antenna structure is examined, and the resulting far-field radiation patterns are shown. Simulation results from a 2D finite difference time domain (FDTD) model for a rectangular microstrip antenna loaded with shorting pins are given and compared to results obtained with an actual antenna. It is hoped that this work will result in a design package for the analysis of microstrip patch antenna elements

Remote detection of aerosol pollution by ERTS

Photogrammetric and densitometric examination of ERTS-1 MSS imagery of Eastern Virginia coupled with extensive ground truth air quality and meteorological data has shown that the identification and surveying of fixed particulate emitters (smoke plumes) is feasible. A description of the ground truth network is included. The quantitative monitoring of smoke stacks from orbital altitudes over state size regions appears possible when tied to realistic plume models and minimal ground truth. Contrast reductions over urban areas can possibly be utilized to produce isopleths of particulates when supplemented by local measurements

Inclusion of seasonal variation in river system microbial communities and phototroph activity increases environmental relevance of laboratory chemical persistence tests

Regulatory tests assess crop protection product environmental fate and toxicity before approval for commercial use. Although globally applied laboratory tests can assess biodegradation, they lack environmental complexity. Microbial communities are subject to temporal and spatial variation, but there is little consideration of these microbial dynamics in the laboratory. Here, we investigated seasonal variation in the microbial composition of water and sediment from a UK river across a two-year time course and determined its effect on the outcome of water-sediment (OECD 308) and water-only (OECD 309) biodegradation tests, using the fungicide isopyrazam. These OECD tests are performed under dark conditions, so test systems incubated under non-UV light:dark cycles were also included to determine the impact on both inoculum characteristics and biodegradation. Isopyrazam degradation was faster when incubated under non-UV light at all collection times in water-sediment microcosms, suggesting that phototrophic communities can metabolise isopyrazam throughout the year. Degradation rate varied seasonally between inoculum collection times only in microcosms incubated in the light, but isopyrazam mineralisation to 14CO2 varied seasonally under both light and dark conditions, suggesting that heterotrophic communities may also play a role in degradation. Bacterial and phototroph communities varied across time, but there was no clear link between water or sediment microbial composition and variation in degradation rate. During the test period, inoculum microbial community composition changed, particularly in non-UV light incubated microcosms. Overall, we show that regulatory test outcome is not influenced by temporal variation in microbial community structure; however, biodegradation rates from higher tier studies with improved environmental realism, e.g. through addition of non-UV light, may be more variable. These data suggest that standardised OECD tests can provide a conservative estimate of pesticide persistence end points and that additional tests including non-UV light could help bridge the gap between standard tests and field studies

Time-division SQUID multiplexers with reduced sensitivity to external magnetic fields

Time-division SQUID multiplexers are used in many applications that require exquisite control of systematic error. One potential source of systematic error is the pickup of external magnetic fields in the multiplexer. We present measurements of the field sensitivity figure of merit, effective area, for both the first stage and second stage SQUID amplifiers in three NIST SQUID multiplexer designs. These designs include a new variety with improved gradiometry that significantly reduces the effective area of both the first and second stage SQUID amplifiers.Comment: 4 pages, 7 figures. Submitted for publication in the IEEE Transactions on Applied Superconductivity, August 201

Measurements of rhenium isotopic composition in low-abundance samples

Rhenium (Re) is a trace element whose redox chemistry makes it an ideal candidate to trace a range of geochemical processes. In particular, fractionation of its isotopes 187Re (62.6% abundance) and 185Re (37.4%) may be used to improve our understanding of redox reactions during weathering, both in the modern day and in geological archives. Published methods for measurement of Re isotopic composition are limited by the requirements of Re mass to reach a desirable precision, making the analysis of many geological materials unfeasible at present. Here we develop new methods which allow us to measure Re isotope ratios (reported as δ187Re) with improved precision: ±0.10‰ (2σ) for a mass of Re of ∼1 ng to ±0.03‰ (2σ) for a mass of Re of >10 ng. This is possible due to the combination of a modified column chemistry procedure and the use of 1013 Ω amplifiers for measurement via multicollector inductively coupled plasma mass spectrometry (MC-ICP-MS). For river water samples (with Re concentrations typically ∼10−12 g g−1) we design a field-based pre-concentration of Re that can be used with large volumes of filtered water (5–20 L) shortly after sample collection to provide abundant Re for isotope analysis. As a result of these developments we provide new measurements of δ187Re in standards reference materials (δ187Re values range from −0.06 ± 0.07‰ to +0.19 ± 0.05‰) and a seawater standard (δ187Re = +0.10 ± 0.04‰), providing impetus for further exploration of the Re isotope system