Design of Operational Transconductance Amplifiers for voltage to current conversion in gas sensing applications

This paper presents a study of Operational Transconductance Amplifiers (OTAs) for voltage to current conversion circuits. The paper includes a comparative analysis of three OTA architectures implemented in 0.35\u3bcm CMOS AMS Technology under \ub1 1.65V power supply voltage. The impact of the OTA topology has been investigated by simulation. The designed OTAs managed to deliver large current values of 10mA and 1mA to the load with a worst-case error of 0.02% under worst-case power supply and temperature conditions and a worst percentage error of 0.12% under process variation for both Miller Compensated and Capacitor Multiplier Compensated OTA. \ua9 2016 AEIT

Description and Predictive Factors of individual outcomes in a refugee camp based mental health intervention (Beirut, Lebanon)

There is little evidence on the effectiveness of services for the care of people with mental disorders among refugee populations. Médecins sans Frontières (MSF) has established a mental health centre in a mixed urban-refugee population in Beirut to respond to the significant burden of mental health problems. Patients received comprehensive care through a multidisciplinary team. A cohort of people with common and severe mental disorders has been analysed between December 2008 and June 2011 to evaluate individual outcomes of treatment in terms of functionality

Bioadsorption of Pb

Herein, the efficiency of Eucalyptus camaldulensis leaves as biosorbent for lead and copper was investigated. The particle size distribution was determined by Granulometric analysis and the functional groups were identified by FT-IR spectroscopy. The effects of contact time, pH and initial metal ions concentration were investigated. The experimental kinetic data were well fitted by the pseudo-second order kinetic model and Langmuir isotherm with a maximum adsorption capacity up to 71 mg g-1 and 37 mg g-1 for Cu2+ and Pb2+ respectively. The selectivity was examined in a binary ions solution where the adsorbent showed preference for lead over copper

Home exposure to Arabian incense (bakhour) and asthma symptoms in children: a community survey in two regions in Oman

<p>Abstract</p> <p>Background</p> <p>Incense burning has been reported to adversely affect respiratory health. The aim of this study was to explore whether exposure to bakhour contributes to the prevalence of asthma and/or triggers its symptoms in Omani children by comparing two Omani regions with different prevalence of asthma.</p> <p>Methods</p> <p>A randomly selected sample of 10 years old schoolchildren were surveyed using an Arabic version of ISAAC Phase II questionnaires with the addition of questions concerning the use and effect of Arabian incense on asthma symptoms. Current asthma was defined as positive response to wheeze in the past 12 months or positive response to "ever had asthma" together with a positive response to exercise wheeze or night cough in the past 12 months. Simple and multivariable logistic regression analyses were performed to estimate the effect of bakhour exposure and other variables on current asthma diagnosis and parents' response to the question: "Does exposure to bakhour affect your child breathing?"</p> <p>Results</p> <p>Of the 2441 surveyed children, 15.4% had current asthma. Bakhour use more than twice a week was three times more likely to affect child breathing compared to no bakhour use (adjusted OR 3.01; 95% CI 2.23–4.08) and this effect was 2.55 times higher in asthmatics (adjusted OR 2.55; 95% CI 1.97–3.31) compared to non-asthmatics. In addition, bakhour caused worsening of wheeze in 38% of the asthmatics, making it the fourth most common trigger factor after dust (49.2%), weather (47.6%) and respiratory tract infections (42.2%). However, there was no significant association between bakhour use and the prevalence of current asthma (adjusted OR 0.87; 95% CI 0.63–1.20).</p> <p>Conclusion</p> <p>Arabian incense burning is a common trigger of wheezing among asthmatic children in Oman. However, it is not associated with the prevalence asthma.</p

Epidermal growth factor mediates detachment from and invasion through collagen I and Matrigel in Capan-1 pancreatic cancer cells

BACKGROUND: Pancreatic adenocarcinoma is a highly invasive neoplasm. Epidermal growth factor (EGF) and its receptor are over expressed in pancreatic cancer, and expression correlates with invasion and metastasis. We hypothesized that EGF receptor and integrin signalling pathways interact in mediating cellular adhesion and invasion in pancreatic cancer, and that invasiveness correlates temporally with detachment from extracellular matrix. METHODS: We tested this hypothesis by investigating the role of EGF in mediating adhesion to and invasion through collagen I and Matrigel in the metastatic pancreatic adenocarcinoma cell line Capan-1. Adhesion and invasion were measured using in vitro assays of fluorescently-labeled cells. Adhesion and invasion assays were also performed in the primary pancreatic adenocarcinoma cell line MIA PaCa-2. RESULTS: EGF inhibited adhesion to collagen I and Matrigel in Capan-1 cells. The loss of adhesion was reversed by AG825, an inhibitor of erbB2 receptor signalling and by wortmannin, a PI3K inhibitor, but not by the protein synthesis inhibitor cycloheximide. EGF stimulated invasion through collagen I and Matrigel at concentrations and time courses similar to those mediating detachment from these extracellular matrix components. Adhesion to collagen I was different in MIA PaCa-2 cells, with no significant change elicited following EGF treatment, whereas treatment with the EGF family member heregulin-alpha elicited a marked increase in adhesion. Invasion through Matrigel in response to EGF, however, was similar to that observed in Capan-1 cells. CONCLUSION: An inverse relationship exists between adhesion and invasion capabilities in Capan-1 cells but not in MIA PaCa-2 cells. EGF receptor signalling involving the erbB2 and PI3K pathways plays a role in mediating these events in Capan-1 cells

The Energy Application Domain Extension for CityGML: enhancing interoperability for urban energy simulations

The road towards achievement of the climate protection goals requires, among the rest, a thorough rethinking of the energy planning tools (and policies) at all levels, from local to global. Nevertheless, it is in the cities where the largest part of energy is produced and consumed, and therefore it makes sense to focus the attention particularly on the cities as they yield great potentials in terms of energy consumption reduction and efficiency increase. As a direct consequence, a comprehensive knowledge of the demand and supply of energy resources, including their spatial distribution within urban areas, is therefore of utmost importance. Precise, integrated knowledge about 3D urban space, i.e. all urban (above and underground) features, infrastructures, their functional and semantic characteristics, and their mutual dependencies and interrelations play a relevant role for advanced simulation and analyses. As a matter of fact, what in the last years has proven to be an emerging and effective approach is the adoption of standard-based, integrated semantic 3D virtual city models, which represent an information hub for most of the abovementioned needs. In particular, being based on open standards (e.g. on the CityGML standard by the Open Geospatial Consortium), virtual city models firstly reduce the effort in terms of data preparation and provision. Secondly, they offer clear data structures, ontologies and semantics to facilitate data exchange between different domains and applications. However, a standardised and omni-comprehensive urban data model covering also the energy domain is still missing at the time of writing (January 2018). Even CityGML falls partially short when it comes to the definition of specific entities and attributes for energy-related applications. Nevertheless, and starting from the current version of CityGML (i.e. 2.0), this article describes the conception and the definition of an Energy Application Domain Extension (ADE) for CityGML. The Energy ADE is meant to offer a unique and standard-based data model to fill, on one hand, the above-mentioned gap, and, on the other hand, to allow for both detailed single-building energy simulation (based on sophisticated models for building physics and occupant behaviour) and city-wide, bottom-up energy assessments, with particular focus on the buildings sector. The overall goal is to tackle the existing data interoperability issues when dealing with energy-related applications at urban scale. The article presents the rationale behind the Energy ADE, it describes its main characteristics, the relation to other standards, and provides some examples of current applications and case studies already adopting it

Implementation and evaluation of a nurse-centered computerized potassium regulation protocol in the intensive care unit - a before and after analysis

<p>Abstract</p> <p>Background</p> <p>Potassium disorders can cause major complications and must be avoided in critically ill patients. Regulation of potassium in the intensive care unit (ICU) requires potassium administration with frequent blood potassium measurements and subsequent adjustments of the amount of potassium administrated. The use of a potassium replacement protocol can improve potassium regulation. For safety and efficiency, computerized protocols appear to be superior over paper protocols. The aim of this study was to evaluate if a computerized potassium regulation protocol in the ICU improved potassium regulation.</p> <p>Methods</p> <p>In our surgical ICU (12 beds) and cardiothoracic ICU (14 beds) at a tertiary academic center, we implemented a nurse-centered computerized potassium protocol integrated with the pre-existent glucose control program called GRIP (Glucose Regulation in Intensive Care patients). Before implementation of the computerized protocol, potassium replacement was physician-driven. Potassium was delivered continuously either by central venous catheter or by gastric, duodenal or jejunal tube. After every potassium measurement, nurses received a recommendation for the potassium administration rate and the time to the next measurement. In this before-after study we evaluated potassium regulation with GRIP. The attitude of the nursing staff towards potassium regulation with computer support was measured with questionnaires.</p> <p>Results</p> <p>The patient cohort consisted of 775 patients before and 1435 after the implementation of computerized potassium control. The number of patients with hypokalemia (<3.5 mmol/L) and hyperkalemia (>5.0 mmol/L) were recorded, as well as the time course of potassium levels after ICU admission. The incidence of hypokalemia and hyperkalemia was calculated. Median potassium-levels were similar in both study periods, but the level of potassium control improved: the incidence of hypokalemia decreased from 2.4% to 1.7% (P < 0.001) and hyperkalemia from 7.4% to 4.8% (P < 0.001). Nurses indicated that they considered computerized potassium control an improvement over previous practice.</p> <p>Conclusions</p> <p>Computerized potassium control, integrated with the nurse-centered GRIP program for glucose regulation, is effective and reduces the prevalence of hypo- and hyperkalemia in the ICU compared with physician-driven potassium regulation.</p