7 research outputs found
Evaluation of the flushing rates of Apalachicola Bay, Florida via natural geochemical tracers
Author Posting. © Elsevier B.V., 2007. This is the author's version of the work. It is posted here by permission of Elsevier B.V. for personal use, not for redistribution. The definitive version was published in Marine Chemistry 109 (2008): 395-408, doi:10.1016/j.marchem.2007.09.001.We used naturally occurring radium isotopes as tracers of water exchange in
Apalachicola Bay, a shallow coastal-plain estuary in northwestern Florida. The bay receives
fresh water and radium from the Apalachicola River, and mixes with Gulf of Mexico waters
through four inlets. We deployed moored buoys with attached Mn-fibers at several stations
throughout the estuary during two summer and two winter periods. After deployment for at least
one tidal cycle we measured the ratio of the two short-lived radium isotopes 223Ra (half-life =
11 d) and 224Ra (3.6 d) to estimate “radium ages” of the water in the bay.
During our four seasonal deployments the river discharge ranged from 338 to 1016 m3 s-
1. According to our calculations the water turnover time in the bay during these samplings
ranged from 6 to 12 days. Age contours in the bay showed that winds and tides as well as river
discharge influence the water movement and the residence time of freshwater in the bay. We
also calculated the mean age of river water in the bay which was between 5 to 9 days during the
studied periods. We suggest that this approach can be used to quantify transport processes of
dissolved substances in the bay. For example, soluble nutrient or pollutant transport rates from a
point source could be examined. We conclude that the radium age technique is well suited for
flushing rate calculations in river dominated shallow estuaries.Henrieta Dulaiova acknowledges
support from the NOAA National Estuarine Research Reserve System’s Graduate Research
Fellowship (Award # NA03NOS4200055). Scientific support for this research was also
provided by grants from NOAA's Cooperative Institute for Coastal and Estuarine Environmental
Technology, CICEET (02-606) and the National Science Foundation (OCE03-50514 and
OCE05-20723)
Preparation of Mn-fiber standards for the efficiency calibration of the delayed coincidence counting system (RaDeCC)
Author Posting. © The Author(s), 2010. This is the author's version of the work. It is posted here by permission of Elsevier B.V. for personal use, not for redistribution. The definitive version was published in Marine Chemistry 121 (2010): 206-214, doi:10.1016/j.marchem.2010.04.009.Precise measurements of the short lived radium isotopes 223Ra and 224Ra by means of the delayed
coincidence counting system (RaDeCC) rely on an efficiency calibration of this system using
Mn-fiber standards for which radium activities are exactly known. We prepared seventeen
different standards by placing Mn-fibers in seawater spiked with various amounts of 227Ac (with
223Ra in radioactive equilibrium), 228Th (in radioactive equilibrium with 232Th and 224Ra) and
226Ra. We tested for quantitative adsorption of 227Ac and 228Th on the Mn-fibers by: (1)
measuring 227Ac and 232Th in the residual solutions after preparing the Mn-fiber standards and
(2) monitoring their 223Ra and 224Ra activities over a period of ~100 days. In the residual
solutions, the activities of 227Ac and 232Th were < 1.0 % and < 5.3 %, respectively, of the
activities initially added to the Mn-fibers. Our results indicate that Milli-Q water washing of the
Mn-fibers is the major source of our observed losses of thorium. Measurements of 227Ac
standards over 1½ years indicate a significant decrease of measurable 223Ra with time prohibiting
the long-term use of 227Ac Mn-fiber standards. We found the 224Ra efficiency to be independent
of the range of 227Ac, 228Th and 226Ra activities on the Mn-fibers standards used. The efficiency
determination for 223Ra, however, may be biased in the case of relatively high 224Ra activities
due to insufficient correction of chance of coincidence. Thus we suggest using a single 227Ac
Mn-fiber standard for the efficiency determination for 223Ra.M. Charette and H. Dulaiova were supported by a grant from the National Science Foundation (OCE- 0751461)
GEOTRACES radium isotopes interlaboratory comparison experiment
Author Posting. © Association for the Sciences of Limnology and Oceanography, 2012. This article is posted here by permission of Association for the Sciences of Limnology and Oceanography for personal use, not for redistribution. The definitive version was published in Limnology and Oceanography: Methods 10 (2012): 451-463, doi:10.4319/lom.2012.10.451.In anticipation of the international GEOTRACES program, which will study the global marine biogeochemistry of trace elements and isotopes, we conducted a multi-lab intercomparison for radium isotopes. The intercomparison was in two parts involving the distribution of: (1) samples collected from four marine environments (open ocean, continental slope, shelf, and estuary) and (2) a suite of four reference materials prepared with isotopic standards (circulated to participants as 'unknowns'). Most labs performed well with 228Ra and 224Ra determination, however, there were a number of participants that reported 226Ra, 223Ra, and 228Th (supported 224Ra) well outside the 95% confidence interval. Many outliers were suspected to be a result of poorly calibrated detectors, though other method specific factors likely played a role (e.g., detector leakage, insufficient equilibration). Most methods for radium analysis in seawater involve a MnO2 fiber column preconcentration step; as such, we evaluated the extraction efficiency of this procedure and found that it ranged from an average of 87% to 94% for the four stations. Hence, nonquantitative radium recovery from seawater samples may also have played a role in lab-to-lab variability.This work was funded by grants from the
National Science Foundation (OCE- 0751461to M.A.C and H.D. and
OCE- 0751867 to W.S.M.)
Erratum : GEOTRACES radium isotopes interlaboratory comparison experiment
Author Posting. © Association for the Sciences of Limnology and Oceanography, 2012. This article is posted here by permission of Association for the Sciences of Limnology and Oceanography for personal use, not for redistribution. The definitive version was published in Limnology and Oceanography: Methods 10 (2012): 617, doi:10.4319/lom.2012.10.617.In our original paper, Charette, M. A., H. Dulaiova, M. E. Gonneea, P. B. Henderson, W. S. Moore, J. C. Scholten, and M. K.
Pham. 2012. GEOTRACES radium isotopes interlaboratory comparison experiment. Limonol. Oceanogr.: Methods 10:451, the
incorrect headers were used for Table 9
A new method for the determination of low-level actinium-227 in geological samples
Author Posting. © The Author(s), 2012. This is the author's version of the work. It is posted here by permission of Springer for personal use, not for redistribution. The definitive version was published in Journal of Radioanalytical and Nuclear Chemistry 296 (2013): 279-283, doi:10.1007/s10967-012-2140-0.We developed a new method for the determination of 227Ac in geological samples. The method uses extraction chromatographic techniques and alpha-spectrometry and is applicable for a range of natural matrices. Here we report on the procedure and results of the analysis of water (fresh and seawater) and rock samples. Water samples were acidified and rock samples underwent total dissolution via acid leaching. A DGA (N,N,N’,N’-tetra-n-octyldiglycolamide) extraction chromatographic column was used for the separation of actinium. The actinium fraction was prepared for alpha spectrometric measurement via cerium fluoride micro-precipitation. Recoveries of actinium in water samples were 80±8 % (number of analyses n=14) and in rock samples 70±12 % (n=30). The minimum detectable activities (MDA) were 0.017-0.5 Bq kg-1 for both matrices. Rock sample 227Ac activities ranged from 0.17 to 8.3 Bq kg-1 and water sample activities ranged from below MDA values to 14 Bq kg-1of 227Ac. From the analysis of several standard rock and water samples with the method we found very good agreement between our results and certified values
New perspectives on radium behavior within a subterranean estuary
Over the past decade, radium isotopes have been frequently applied as tracers of submarine groundwater discharge (SGD). The unique radium signature of SGD is acquired within the subterranean estuary, a mixing zone between fresh groundwater and seawater in coastal aquifers, yet little is known about what controls Ra cycling in this system. The focus of this study was to examine controls on sediment and groundwater radium activities within permeable aquifer sands (Waquoit Bay, MA, USA) through a combination of field and laboratory studies. In the field, a series of sediment cores and corresponding groundwater profiles were collected for analysis of the four radium isotopes, as well as dissolved and sediment associated manganese, iron, and barium. We found that in addition to greater desorption at increasing salinity, radium was also closely tied to manganese and iron redox cycling within these sediments. A series of laboratory adsorption/desorption experiments helped elucidate the importance of 1) contact time between sediment and water, 2) salinity of water in contact with sediment, 3) redox conditions of water in contact with sediment, and 4) the chemical characteristics of sediment on radium adsorption/desorption. We found that these reactions are rapid (on the order of hours), desorption increases with increasing salinity and decreasing pH, and the presence of Fe and Mn (hydr)oxides on the sediment inhibit the release of radium. These sediments have a large capacity to sorb radium from fresh water. Combined with these experimental results, we present evidence from time series groundwater sampling that within this subterranean estuary there are cyclic periods of Ra accumulation and release controlled by changing salinity and redox conditions