Low temperature synthesis study of metal-organic framework CPO-27 : investigating metal, solvent and base effects down to -78 °C

We thank the EPSRC (EP/K005499/1) (EP/K503162/1) for their financial support of this project and the EPSRC Capital for Great Technologies (EP/L017008/1).CPO-27-M (M = Co, Mg, Ni, Zn) metal-organic frameworks have been successfully synthesized at temperatures down to -78 °C in a range of solvent systems and their crystallinity and morphology analyzed by powder X-ray diffraction and scanning electron microscopy. CPO-27-Mg and -Zn could be synthesized at lower temperatures using MeOH-NaOH as the solvent with CPO-27-Zn showing the most crystalline material at -78 °C. CPO-27-Zn afforded the most crystalline samples of all studies in MeOH-TEA. However, in MeOH a non-porous monomeric [Zn(H2dhtp)(H2O)2] complex was formed when no base was present. In THF with base (NaOH, TEA) the reaction produced crystalline MOFs in a controlled and stable manner at low temperatures, whilst the reagents were insoluble in THF at low temperature when no base was present. SEM was used to analyze the morphologies of the products.PostprintPeer reviewe

A single crystal study of CPO-27 and UTSA-74 for nitric oxide storage and release

Funding: UK EPSRC EP/K005499/1, EP/K503162, and EP/L017008/1).Single crystal CPO-27-Mg, -Zn and its structural isomer UTSA-74 have been prepared through use of acid modulators; salicylic acid and benzoic acid, respectively. Salicylic acid directed the synthesis of CPO-27-Mg/Zn whereas benzoic acid the synthesis of UTSA-74. Through “in-house” SCXRD, DMF was seen to bind to the Zn2+ and water to the Mg2+ metal sites in CPO-27-M. Although the synthesis conditions were analogous for UTSA-74, DMF is too large to bind due to the proximity of the binding sites. A dissolution–recrystallisation transformation was examined from UTSA-74 to CPO-27-Zn. The release of nitric oxide was measured for each material.PostprintPeer reviewe

Monitoring the assembly-disassembly-organisation-reassembly process of germanosilicate UTL through in situ pair distribution function analysis

The authors would like to thank: The EPSRC (grants: EP/K025112/1; EP/K005499/1; EP/K503162/1) for funding opportunities and beam line I15 at the Diamond Light Source. Phoebe Allan is acknowledged for her help and knowledge of PDF refinement. M.M. and R.E.M. would like to acknowledge OP VVV "Excellent Research Teams", project No. CZ.02.1.01/0.0/0.0/15_003/0000417 - CUCAM.A study into the disassembly and organisation steps of the ADOR process has been undertaken through in situ Pair Distribution Function (PDF) analysis. Three aqueous systems (water, 6 M HCl and 12 M HCl) were introduced to a parent zeolite germanosilicate UTL in a cell. Hydrolysis could be clearly seen when UTL was exposed to water over a period of 8 hr, forming the disorded layered material, IPC-1P. In hydrochloric acid, the hydrolysis step is too quick to observe and a Ge-Cl containing species could be seen. In 6 M HCl, the rearrangement of the interlayer region began after an induction period of 8 hr, with the process still occuring after 15 hr. In 12 M HCl, the rearrangement appears to have come to an end after only 6 hr.PostprintPeer reviewe

Kinetics and mechanism of the hydrolysis and rearrangement processes within the assembly-disassembly-organization-reassembly synthesis of zeolites

The authors would like to thank the EPSRC (grants: EP/K025112/1; EP/K005499/1; EP/K503162/1; EP/N509759/1) for funding opportunities. R.E.M., and M.M. would like to acknowledge OP VVV "Excellent Research Teams", project No. CZ.02.1.01/0.0/0.0/15_003/0000417 - CUCAM. We would like to thank the ERC (Advanced Grant 787073 “ADOR”).The hydrolysis (disassembly, D) and rearrangement (organization, O) steps of the assembly-disassembly-organization-reassembly (ADOR) process for the synthesis of zeolites have been studied. Germanium–rich UTL was subjected to hydrolysis conditions in water to understand the effects of temperature (100, 92, 85, 81, 77, and 70 °C). Samples were taken periodically over an 8–37 h period and each sample was analyzed by powder X-ray diffraction. The results show that the hydrolysis step is solely dependent on the presence of liquid water, whereas the rearrangement is dependent on the temperature of the system. The kinetics have been investigated using the Avrami-Erofeev model. With increasing temperature, an increase in rate of reaction for the rearrangement step was observed and the Arrhenius equation was used to ascertain an apparent activation energy for the rearrangement from the kinetic product of the disassembly (IPC-1P) to the thermodynamic product of the rearrangement (IPC-2P). From this information a mechanism for this transformation can be postulated.Publisher PDFPeer reviewe

A procedure for identifying possible products in the Assembly-Disassembly-Organisation-Reassembly (ADOR) synthesis of zeolites

The authors would like to thank the EPSRC (grants: EP/K025112/1; EP/K005499/1; EP/K503162/1; EP/N509759/1) for funding opportunities. R.E.M., J.C. and M.M. would like to acknowledge OP VVV "Excellent Research Teams", project No. CZ.02.1.01/0.0/0.0/15_003/0000417 - CUCAM. S.E.A. would like to thank the Royal Society and the Wolfson Foundation for a merit award. J.C. acknowledges the Czech Science Foundation (P106/12/G015).High-silica zeolites, some of the most important and widely used catalysts in industry, have potential for application across a wide range of traditional and emerging technologies. The many structural topologies of zeolites have a variety of potential uses, so a strong drive to create new zeolites exists. Here, we present a protocol, the assembly–disassembly–organization–reassembly (ADOR) process, for a relatively new method of preparing these important solids. It allows the synthesis of new high-silica zeolites (Si/Al >1,000), whose synthesis is considered infeasible with traditional (solvothermal) methods, offering new topologies that may find novel applications. We show how to identify the optimal conditions (e.g., duration of reaction, temperature, acidity) for ADOR, which is a complex process with different possible outcomes. Following the protocol will allow researchers to identify the different products that are possible from a reaction without recourse to repetitive and time-consuming trial and error. In developing the protocol, germanium-containing UTL zeolites were subjected to hydrolysis conditions using both water and hydrochloric acid as media, which provides an understanding of the effects of temperature and pH on the disassembly (D) and organization (O) steps of the process that define the potential products. Samples were taken from the ongoing reaction periodically over a minimum of 8 h, and each sample was analyzed using powder X-ray diffraction to yield a time course for the reaction at each set of conditions; selected samples were analyzed using transmission electron microscopy and solid-state NMR spectroscopy.PostprintPeer reviewe

In situ flow pair distribution function analysis to probe the assembly-disassembly-organisation-reassembly (ADOR) mechanism of zeolite IPC-2 synthesis

The authors S. E. R., S. M. V., and R. E. M. would like to thank the European Research Council for funding opportunities under the Advanced Grant 787073. S. E. H., S. M. V. and D. N. R. would like to thank the EPSRC for funding (EP/K503162/1) (EP/K005499/1) (EP/N509759/1). R. E. M. further acknowledges the OP VVV “Excellent Research Teams” grant under project no. CZ.02.1.01/0.0/0.0/15_003/0000417 – CUCAM.The assembly–disassembly–organisation–reassembly (ADOR) process is an important tool to access zeolite structures that are otherwise unfeasible via hydrothermal methods. In situ flow pair distribution function (PDF) analysis has been used to probe the mechanism of the disassembly and organisation steps, with the disassembly a rapid step that is often difficult to capture. Zeolite UTL was hydrolysed by 6 M hydrochloric acid, with PDF measurements used to monitor framework alterations as the reaction proceeded. The resulting disassembly mechanism shows an initial rapid removal of germanium from the germanium-rich double 4 rings (d4r), followed by silicon rearrangement and gradual silanol condensation to form IPC-2P.Publisher PDFPeer reviewe

Continuous MOF Membrane-Based Sensors via Functionalization of Interdigitated Electrodes

Three M-MOF-74 (M = Co, Mg, Ni) metal-organic framework (MOF) thin film membranes have been synthesized through a sensor functionalization method for the direct electrical detection of NO2. The two-step surface functionalization procedure on the glass/Pt interdigitated electrodes resulted in a terminal carboxylate group, with both steps confirmed through infrared spectroscopic analysis. This surface functionalization allowed the MOF materials to grow largely in a uniform manner over the surface of the electrode forming a thin film membrane over the Pt sensing electrodes. The growth of each membrane was confirmed through scanning electron microscopy (SEM) and X-ray diffraction analysis. The Ni and Mg MOFs grew as a continuous but non-defect free membrane with overlapping polycrystallites across the glass surface, whereas the Co-MOF-74 grew discontinuously. To demonstrate the use of these MOF membranes as an NO2 gas sensor, Ni-MOF-74 was chosen as it was consistently fabricated as the best thin and homogenous membrane, as confirmed by SEM. The membrane was exposed to 5 ppm NO2 and the impedance magnitude was observed to decrease 123× in 4 h, with a larger change in impedance and a faster response than the bulk material. Importantly, the use of these membranes as a sensor for NO2 does not require them to be defect-free, but solely continuous and overlapping growth

Continuous MOF Membrane-Based Sensors via Functionalization of Interdigitated Electrodes

Three M-MOF-74 (M = Co, Mg, Ni) metal-organic framework (MOF) thin film membranes have been synthesized through a sensor functionalization method for the direct electrical detection of NO2. The two-step surface functionalization procedure on the glass/Pt interdigitated electrodes resulted in a terminal carboxylate group, with both steps confirmed through infrared spectroscopic analysis. This surface functionalization allowed the MOF materials to grow largely in a uniform manner over the surface of the electrode forming a thin film membrane over the Pt sensing electrodes. The growth of each membrane was confirmed through scanning electron microscopy (SEM) and X-ray diffraction analysis. The Ni and Mg MOFs grew as a continuous but non-defect free membrane with overlapping polycrystallites across the glass surface, whereas the Co-MOF-74 grew discontinuously. To demonstrate the use of these MOF membranes as an NO2 gas sensor, Ni-MOF-74 was chosen as it was consistently fabricated as the best thin and homogenous membrane, as confirmed by SEM. The membrane was exposed to 5 ppm NO2 and the impedance magnitude was observed to decrease 123× in 4 h, with a larger change in impedance and a faster response than the bulk material. Importantly, the use of these membranes as a sensor for NO2 does not require them to be defect-free, but solely continuous and overlapping growth