2,032 research outputs found

    Dip coating process: Silicon sheet growth development for the large-area silicon sheet task of the low-cost silicon solar array project

    Get PDF
    To date, an experimental dip-coating facility was constructed. Using this facility, relatively thin (1 mm) mullite and alumina substrates were successfully dip-coated with 2.5 - 3.0 ohm-cm, p-type silicon with areas of approximately 20 sq cm. The thickness and grain size of these coatings are influenced by the temperature of the melt and the rate at which the substrate is pulled from the melt. One mullite substrate had dendrite-like crystallites of the order of 1 mm wide and 1 to 2 cm long. Their axes were aligned along the direction of pulling. A large variety of substrate materials were purchased or developed enabling the program to commence a substrate definition evaluation. Due to the insulating nature of the substrate, the bottom layer of the p-n junction may have to be made via the top surface. The feasibility of accomplishing this was demonstrated using single crystal wafers

    Dip coating process: Silicon sheet growth development for the large-area silicon sheet task of the low-cost silicon solar array project

    Get PDF
    The technical and economic feasibility of producing solar cell quality sheet silicon by dip-coating one surface of carbonized ceramic substrates with a thin layer of large grain polycrystalline silicon was investigated. The dip-coating methods studied were directed toward a minimum cost process with the ultimate objective of producing solar cells with a conversion efficiency of 10% or greater. The technique shows excellent promise for low cost, labor-saving, scale-up potentialities and would provide an end product of sheet silicon with a rigid and strong supportive backing. An experimental dip-coating facility was designed and constructed, several substrates were successfully dip-coated with areas as large as 25 sq cm and thicknesses of 12 micron to 250 micron. There appears to be no serious limitation on the area of a substrate that could be coated. Of the various substrate materials dip-coated, mullite appears to best satisfy the requirement of the program. An inexpensive process was developed for producing mullite in the desired geometry

    Tree-based Coarsening and Partitioning of Complex Networks

    Full text link
    Many applications produce massive complex networks whose analysis would benefit from parallel processing. Parallel algorithms, in turn, often require a suitable network partition. For solving optimization tasks such as graph partitioning on large networks, multilevel methods are preferred in practice. Yet, complex networks pose challenges to established multilevel algorithms, in particular to their coarsening phase. One way to specify a (recursive) coarsening of a graph is to rate its edges and then contract the edges as prioritized by the rating. In this paper we (i) define weights for the edges of a network that express the edges' importance for connectivity, (ii) compute a minimum weight spanning tree TmT^m with respect to these weights, and (iii) rate the network edges based on the conductance values of TmT^m's fundamental cuts. To this end, we also (iv) develop the first optimal linear-time algorithm to compute the conductance values of \emph{all} fundamental cuts of a given spanning tree. We integrate the new edge rating into a leading multilevel graph partitioner and equip the latter with a new greedy postprocessing for optimizing the maximum communication volume (MCV). Experiments on bipartitioning frequently used benchmark networks show that the postprocessing already reduces MCV by 11.3%. Our new edge rating further reduces MCV by 10.3% compared to the previously best rating with the postprocessing in place for both ratings. In total, with a modest increase in running time, our new approach reduces the MCV of complex network partitions by 20.4%

    Poisonings Associated with Intubation: US National Poison Data System Exposures 2000-2013.

    Get PDF
    Patients may be intubated after exposure to a variety of substances because of respiratory failure, CNS sedation, pulmonary pathology, or cardiovascular instability. However, there is little data describing the types of substances that are associated with endotracheal intubation or the rates of intubation after these exposures. Evaluation of this association may inform future research on intubation after exposures to specific substances and guide poison prevention education. Our objective was to determine which exposures were commonly associated with intubation using the data from National Poison Data System (NPDS). The NPDS tracks data from potential exposures to substances reported to all American Association of Poison Control Centers. We performed a retrospective analysis of NPDS data from January 1st, 2000 to December 31st, 2013 to identify human exposures to substances that were associated with endotracheal intubation. Descriptive statistics were used to analyze the data. There were 93,474 single substance exposures and 228,507 multiple substance exposures that were associated with intubation. The most common exposures to substances that were associated with intubation were atypical antipsychotics (7.4 %) for single exposures and benzodiazepines (27.4 %) for multiple exposures. Within each age group, the most common known exposures to substances were for patients under 6 years, clonidine for single and multiple exposures; for patients aged 6-12 years, clonidine for single exposures and atypical antipsychotics for multiple exposures; for patients aged 13-19 years, atypical antipsychotics for single and multiple exposures; and for patients over 19 years, atypical antipsychotics for single exposures and benzodiazepines for multiple exposures. From 2000-2013, the exposures to substances most commonly associated with intubation varied by single versus multiple exposures and by age. This study helps clarify the exposures to substances that are associated with intubation reported to poison centers in the USA

    Chinese and African migrant entrepreneur's articulation shaped by African agency

    Get PDF
    Much has been written on the relationship of China and Africa in the past decade. However, the subject of Chinese migrant entrepreneurs in Africa and their articulation with African counterparts was little explored up to the early 2010s. Apparently, this research gap has been closed, as shown by four publications in recent years: three edited volumes and one monography, focusing on this subject. In view of early prejudices on the passive or even disapproving reception of Chinese migrants by Africans, the state of the art underlines the importance and scope of African agency vis à vis Chinese migrant entrepreneurs in Africa. This has been underlined unison in the four books under review. Book review of:(1) Giese, Karsten, Marfaing, Laurence (eds) (2016): Entrepreneurs Africains et Chinois. Les impacts sociaux d’une rencontre particulière. Paris: Karthala. (2) Gadzala, Aleksandra W. (ed) (2015): Africa and China: how Africans and their governments are shaping relations with China. Lanham/Md.: Rowman & Littlefield. (3) Mohan, Giles, Lampert, Ben et al (eds) (2014): Chinese Migrants and Africa's Development: new imperialists or agents of change? London: Zed books. (4) French, Howard W. (2015): China's Second Continent: how a million migrants are building a new empire in Africa. London: Penguin Random House / New York: Knopf.On a beaucoup écrit sur la relation entre la Chine et l'Afrique dans la dernière décennie. Cependant, le sujet des entrepreneurs migrants chinois en Afrique et leur articulation avec leurs homologues africains a été peu exploré jusqu'au début des années 2010. Apparemment, cet écart de recherche a été fermé, comme indiqué par quatre publications au cours des dernières années: trois volumes édités et une monographie, en se concentrant sur ce sujet. Compte tenu des premiers préjugés sur la réception passive ou même désapprobateur des migrants chinois par les Africains, l'état de l'art souligne l'importance et la portée de l'agence africaine vis-à-vis des entrepreneurs migrants chinois en Afrique

    7700-Year Persistence of an Isolated, Free-Living Coral Assemblage in the Galapagos Islands: A Model for Coral Refugia?

    Get PDF
    In an eastern-Pacific coral assemblage at Devil’s Crown, Galápagos Islands, Ecuador, two coral species, Psammocora stellata and Cycloseris (Diaseris) distorta, form dense populations of unattached colonies on sand and rubble substrata. In the Galápagos, living C. (D.) distorta is found only at this single site, whereas populations of P. stellata are found throughout the Archipelago. Six cores dating to ~ 7700 yBP showed P. stellata to be dominant throughout the history of this isolated community, but C. (D.) distorta increased in abundance from ~ 2200 yBP and reached peak abundance between 1471 yBP and the present. The relative frequency of the two coral species may be linked to millennial-scale climatic variability, and this site may represent a refuge for C. (D.) distorta from unfavorable climatic fluctuations on millennial timescales. Our results demonstrate that some corals can persist in isolated populations for millennia

    Functional responses of methanogenic archaea to syntrophic growth.

    Get PDF
    Methanococcus maripaludis grown syntrophically with Desulfovibrio vulgaris was compared with M. maripaludis monocultures grown under hydrogen limitation using transcriptional, proteomic and metabolite analyses. These measurements indicate a decrease in transcript abundance for energy-consuming biosynthetic functions in syntrophically grown M. maripaludis, with an increase in transcript abundance for genes involved in the energy-generating central pathway for methanogenesis. Compared with growth in monoculture under hydrogen limitation, the response of paralogous genes, such as those coding for hydrogenases, often diverged, with transcripts of one variant increasing in relative abundance, whereas the other was little changed or significantly decreased in abundance. A common theme was an apparent increase in transcripts for functions using H(2) directly as reductant, versus those using the reduced deazaflavin (coenzyme F(420)). The greater importance of direct reduction by H(2) was supported by improved syntrophic growth of a deletion mutant in an F(420)-dependent dehydrogenase of M. maripaludis. These data suggest that paralogous genes enable the methanogen to adapt to changing substrate availability, sustaining it under environmental conditions that are often near the thermodynamic threshold for growth. Additionally, the discovery of interspecies alanine transfer adds another metabolic dimension to this environmentally relevant mutualism

    Stressed backbone and elasticity of random central-force systems

    Full text link
    We use a new algorithm to find the stress-carrying backbone of ``generic'' site-diluted triangular lattices of up to 10^6 sites. Generic lattices can be made by randomly displacing the sites of a regular lattice. The percolation threshold is Pc=0.6975 +/- 0.0003, the correlation length exponent \nu =1.16 +/- 0.03 and the fractal dimension of the backbone Db=1.78 +/- 0.02. The number of ``critical bonds'' (if you remove them rigidity is lost) on the backbone scales as L^{x}, with x=0.85 +/- 0.05. The Young's modulus is also calculated.Comment: 5 pages, 5 figures, uses epsfi
    • …
    corecore