27 research outputs found
Fabrication of high-performance fluorine doped–tin oxide film using flame-assisted spray deposition
A high-performance fluorine–doped tin oxide (FTO) film was fabricated by flame-assisted spray deposition
method. By varying the NH4F doping concentration, the optimal concentration was established as 8 at.%.
X-ray diffractograms confirmed that the as-grown FTO film was tetragonal SnO2. In addition, the FTO film
was comprised of nano-sized grains ranging from 40 to 50 nm. The heat-treated FTO film exhibited a
sheet resistance of 21.8 Ω/ with an average transmittance of 81.9% in the visible region (λ = 400–800 nm).
The figures of merit shows that the prepared FTO film can be used for highly efficient dye-sensitized solar
cells electrodes
SINTESA NANOFIBER TITANIUM DIOKSIDA (TiO2) ANATASE MENGGUNAKAN METODE ELECTROSPINNING
SYNTHESIS OF ANATASE TITANIUM DIOXIDE (TiO2) NANOFIBER BY ELECTROSPINNING METHOD. This research reported the synthesis of nanofiber anatase titanium dioxide (TiO2) using electrospinning. To produce nanofiber, the precursor solution was passed through a capillary of syringes given a positive DC voltage of 13 kV and then as-prepared nanofiber annealed at temperature of 500°C for 1 hour. The annealed samples were then analyzed using a scanning electron microscope (SEM) and x-ray diffractometer (XRD). In this study, the effect of changes in the flow rate of the precursor solution and the weight of raw material of titanium tetraisopropoxide (TTIP) to the crystallinity and morphology of the sample were systematically investigated. This research resulted that the TiO2 nanofiber have a mixed phase between anatase and rutile. The amount of rutile TiO2 could be reduced by increasing the flow rate of precursor solution. The optimum flow rate to obtain the pure anatase TiO2 was adjusted at 2.0 mL/h. In addition. TTIP weight affected the morphology of nanofiber which by increasing the amount of TTIP resulted morphological change to become more dense and uniform in shape and size.
Keywords: anatase; electrospinning; nanofiber; rutile; titania
Abstrak
Pada penelitian ini telah berhasil dibuat nanofiber titanium dioksida (TiO2) anatase dengan menggunakan metode electrospinning. Nanofiber TiO2 dihasilkan dengan cara melewatkan larutan prekursor pada jarum suntik yang diberi tegangan DC positif 13 kV pada ujungnya. Fiber hasil spinning kemudian dikalsinasi pada suhu 500°C selama 1 jam. Sampel yang telah dikalsinasi kemudian dianalisis menggunakan scanning electron microscope (SEM) dan x-ray diffractometer (XRD). Pada penelitian ini pengaruh dari perubahan laju aliran larutan prekursor dan berat material baku titanium tetraisopropoxide (TTIP) terhadap sifat kristal dan morfologi sampel dikaji secara sistematis. Dari penelitian ini diperoleh bahwa TiO2 yang dihasilkan memiliki fase campuran antara anatase dan rutile, namun dengan menaikkan laju aliran prekursor mampu menurunkan jumlah fase rutilenya sehingga pada laju aliran 2,0 mL/h diperoleh nanofiber TiO2 dengan fase anatase murni. Berat TTIP sangat mempengaruhi morfologi nanofiber yang diperoleh dimana dengan menaikkan jumlah TTIP morfologi fiber mangalami perubahan menjadi lebih padat (dense) dan lebih seragam baik bentuk dan ukurannya.
Kata kunci: anatase; electrospinning; nanofiber; rutile; titani
CuO/WO3 and Pt/WO3 nanocatalysts for efficient pollutant degradation using visible light irradiation
CuO/WO3 and Pt/WO3 nanocatalysts with a nanorod morphology were used for photodegradation of
organic compounds using visible light irradiation. Both nanocatalysts were prepared using flame assisted
spray pyrolysis method (FASP). The prepared nanocatalysts were mechanically stable during the agitation
treatment for the photodegradation test due to good interconnection between WO3 and co-catalysts. The
enhancement of photocatalytic activity was observed after the addition of CuO and Pt as co-catalysts. The
addition of CuO would change the morphology of WO3 from nanorods to cubic. The optimal concentration
of the CuO addition was 0.33 wt.%. A low Pt concentration (0.12 wt.%) was required for optimal
photocatalytic activity of the Pt/WO3 nanocomposite. The addition of Pt affected neither the morphology
nor the crystallite structure of WO3
Synthesis of Hard Carbon from Waste Teak Wood Powder as Anode Material for Lithium-ion Batteries
Electrochemical energy storage technologies such as rechargeable batteries show considerable progress due to their high efficiency, flexible power, long life cycle, and low maintenance. Graphite is a common anode material used in lithium-ion batteries. However, there are several shortcomings in graphite anode material, one of which is poor structural stability. Therefore, hard carbon is the most promising candidate for lithium-ion battery anodes due to its high storage capacity, low working potential, and cycle stability. This research utilizes teak sawdust waste as a hard carbon battery anode. They were approached by the carbonization method at temperatures of 350°C and 450°C. In general, X-Ray Diffraction (XRD) results show an amorphous structure of carbon atoms. The morphological structure known through the Scanning Electron Microscopy with Energy Dispersive X-ray (SEM-EDX) test shows a fiber shape. The mass percent of carbon at a temperature of 450°C was higher than at a temperature of 350°C, which was 67.93%. Then the battery performance test was carried out with the highest discharge capacity value obtained at a temperature of 450°C at 191.56 mAh/g. Based on the results of this study, teak sawdust waste material has the potential as an anode for rechargeable batteries and can prevent environmental pollution
Hydrazine and Urea Fueled-Solution Combustion Method for Bi2O3 Synthesis: Characterization of Physicochemical Properties and Photocatalytic Activity
Bismuth oxide synthesis using solution combustion method fuelled by hydrazine and urea has been conducted. This study aims to examine the effect of the applied fuels, urea and hydrazine, on product characteristics and photocatalytic activity in degrading rhodamine B dye. Bismuth oxide synthesis was initiated by dissolving bismuth nitrate pentahydrate (Bi(NO3)3.5H2O) in a nitric acid solvent. Fuel was added and then stirred. The solution formed was heated at 300 ºC for 8 hours. The product obtained was then calcined at 700 ºC for 4 hours. Bismuth oxide synthesized with urea (BO1) and hydrazine (BO2) as fuels both obtained form of yellow powder. The formation of bismuth oxide is indicated by the vibrations of the Bi–O–Bi and Bi–O groups and the crystal structure of a-Bi2O3 in both products. Photocatalytic activity test showed that BO1 has a photocatalyst activity in degrading rhodamine B higher than that of BO2 with constant values of 3.83×10-5 s-1 and 3.43×10-5 s-1, respectively. The high photocatalytic activity can be examined through several factors, such as: band gap values, crystal structure, morphology, and surface area, acquired as a result of the use of different fuels in the synthesis process. Copyright © 2020 by Authors, Published by BCREC Group. This is an open access article under the CC BY-SA License (https://creativecommons.org/licenses/by-sa/4.0)
PEMBUATAN KOMPOSIT CARBON NANOTUBE-POLYVINYL ALCOHOL (CNT-PVA) SERTA EVALUASI SIFAT MEKANIKNYA
Perkembangan teknologi nanomaterial mendukung teknologi komposit. Komposit yang menggunakannanomaterial menghasilkan sifat mekanik yang lebih baik daripada komposit biasa. Komposit carbon nanotubes(CNT) berpotensi memiliki kekuatan tarik yang tinggi oleh adanya struktur tabung nanonya yang baik sebagaimatrik. Komposit CNT-PVA telah dibuat dengan metode pelarutan. Polyvinyl alcohol (PVA) dilarutkan dalam airbertemperatur 80°C, selanjutnya material CNT ditambahkan ke dalam larutan tersebut dengan variasi fraksi massaCNT terhadap PVA sebesar 10%, 20% dan 30%. Komposit CNT-PVA terbentuk setelah dikeringkan padatemperatur 80°C. Selanjutnya sifat mekanik komposit dikarakterisasi dengan uji kekuatan tarik. Hasil ujimenunjukkan bahwa komposit CNT-PVA dengan fraksi massa 20% CNT terhadap PVA menghasilkan modulusYoung yang paling besar yaitu 137,71MPa. Ketebalan komposit 0,94 mm yang dibangun oleh tiga lapis tipiskomposit CNT-PVA menghasilkan peningkatan modulus Young hingga 107,30%
Pembuatan Komposit Carbon Nanotube-polyvinyl Alcohol (Cnt-pva) Serta Evaluasi Sifat Mekaniknya
Perkembangan teknologi nanomaterial mendukung teknologi komposit. Komposit yang menggunakannanomaterial menghasilkan sifat mekanik yang lebih baik daripada komposit biasa. Komposit carbon nanotubes(CNT) berpotensi memiliki kekuatan tarik yang tinggi oleh adanya struktur tabung nanonya yang baik sebagaimatrik. Komposit CNT-PVA telah dibuat dengan metode pelarutan. Polyvinyl alcohol (PVA) dilarutkan dalam airbertemperatur 80°C, selanjutnya material CNT ditambahkan ke dalam larutan tersebut dengan variasi fraksi massaCNT terhadap PVA sebesar 10%, 20% dan 30%. Komposit CNT-PVA terbentuk setelah dikeringkan padatemperatur 80°C. Selanjutnya sifat mekanik komposit dikarakterisasi dengan uji kekuatan tarik. Hasil ujimenunjukkan bahwa komposit CNT-PVA dengan fraksi massa 20% CNT terhadap PVA menghasilkan modulusYoung yang paling besar yaitu 137,71MPa. Ketebalan komposit 0,94 mm yang dibangun oleh tiga lapis tipiskomposit CNT-PVA menghasilkan peningkatan modulus Young hingga 107,30%
PEMBUATAN SISTEM PENGOLAH AIR BERSIH MENGGUNAKAN MATERIAL FOTOKATALIS TITANIA (TiO2)
Abstrak Telah berhasil dibuat sistem pengolah air bersih menggunakan material fotokatalis titania (TiO2). Sistem pengolah air bersih yang terdiri dari 2 pompa yang bertujuan untuk mengalirkan air kotor ke bak penampungan pertama, dan pompa kedua untuk mensirkulasikan air yang telah melewati biofilter untuk diolah melalui reaktor foto katalis TiO2 yang diaktifasi dengan menggunakan lampu UV sebanyak 2 buah masing-masing dengan daya 10 W. Lapisan tipis TiO2 dideposisi di atas substrat gelas dengan metode sol-gel teknik spray coating. Titanium Tetraisopropoxide 0,5 M dilarutkan ke dalam Diethylene Glycol dengan perbandingan mol DEG: (Ti(OC3H7)4 adalah 4:1 lalu diaduk dengan magnetic stirrer pada laju putar sebesar 1500 rpm selama 2 jam. Gel TiO2 hasil sintesis kemudian dimasukan ke dalam tabung spray-coater dan diberi tekanan Sebelum disemprot, substrat gelas dipanaskan pada temperatur 70oC untuk meningkatkan daya ikat antara larutan dengan substrat. Lapisan hasil penyemprotan selanjutnya di oven pada temperatur 200oC selama 30 menit dan sintering pada temperatur 450oC selama 2,5 jam. Hasil pengujian struktur kristal dengan x-ray diffractometer (XRD) menunjukkan bahwa semakin banyak pelapisan yang dilakukan menyebabkan kualitas kristal dari lapisan tipis TiO2 meningkat. Hal ini ditunjukkan dengan semakin menurunnya nilai FWHM. Selain itu, semakin banyaknya pelapisan yang dilakukan menyebabkan ukuran kristalit dari lapisan tipis TiO2 meningkat. Citra SEM lapisan tipis TiO2 menunjukkan bahwa semakin besar molaritas prekursor TiO2 menyebabkan kuantitas keretakan pada permukaan semakin menurun. Hasil pengujian BOD dan COD dari sistem pengolah air bersih menunjukkan bahwa sistem yang dibuat telah mampu mereduksi kandungan BOD hingga 5,76 mg/L dan COD hingga 25,22 mg/L. Kata kunci: Lapisan Tipis TiO2, Spray Coating, Foto Katalis, Substrat Gela
Studying Impact of Different Precipitating Agents on Crystal Structure, Morphology and Photocatalytic Activity of Bismuth Oxide
Bismuth oxide (Bi2O3) is a well-studied photocatalyst for degradation of various environmental contaminants. In this research Bi2O3 has been synthesized by precipitation method using two different bases (NH4OH and NaOH). The samples thus obtained were then analyzed using FTIR, XRD, and SEM for surface functionalization, crystal structures and morphological differences, respectively. The Bi2O3 precipitated using NH4OH showed a flower like structure made up of individual plates having α-Bi2O3 crystal structure. The precipitate obtained using NaOH showed a honeycomb like flower structure with a mixture of both α-Bi2O3 and γ-Bi2O3 crystal structure. Degradation of methyl orange (MO) was used as a model system to test the photocatalytic activity of the bismuth oxide. The Bi2O3 synthesized using NH4OH showed superior photocatalytic degradation of methyl orange than the one synthesized using NaOH.