Temporomandibular joint damage in juvenile idiopathic arthritis: Diagnostic validity of diagnostic criteria for temporomandibular disorders

Diagnostic criteria reported in the expanded taxonomy for temporomandibular disorders include a standardised clinical examination and diagnosis (DC/TMD 3.B) of temporomandibular joint (TMJ) damage in patients with juvenile idiopathic arthritis (JIA); however, their validity is unknown

The randomized shortened dental arch study (RaSDA): design and protocol

<p>Abstract</p> <p>Background</p> <p>Various treatment options for the prosthetic treatment of jaws where all molars are lost are under discussion. Besides the placement of implants, two main treatment types can be distinguished: replacement of the missing molars with removable dental prostheses and non-replacement of the molars, i.e. preservation of the shortened dental arch. Evidence is lacking regarding the long-term outcome and the clinical performance of these approaches. High treatment costs and the long time required for the treatment impede respective clinical trials.</p> <p>Methods/design</p> <p>This 14-center randomized controlled investigator-initiated trial is ongoing. Last patient out will be in 2010. Patients over 35 years of age with all molars missing in one jaw and with at least both canines and one premolar left on each side were eligible. One group received a treatment with removable dental prostheses for molar replacement (treatment A). The other group received a treatment limited to the replacement of all missing anterior and premolar teeth using fixed bridges (treatment B). A pilot trial with 32 patients was carried out. Two hundred and fifteen patients were enrolled in the main trial where 109 patients were randomized for treatment A and 106 for treatment B. The primary outcome measure is further tooth loss during the 5-year follow-up. The secondary outcome measures encompassed clinical, technical and subjective variables. The study is funded by the Deutsche Forschungsgemeinschaft (German Research Foundation, DFG WA 831/2-1, 2-2, 2-3, 2-4, 2-5).</p> <p>Discussion</p> <p>The particular value of this trial is the adaptation of common design components to the very specific features of complex dental prosthetic treatments. The pilot trial proved to be indispensable because it led to a number of adjustments in the study protocol that considerably improved the practicability. The expected results are of high clinical relevance and will show the efficacy of two common treatment approaches in terms of oral health. An array of secondary outcome measures will deliver valuable supplementary information. If the results can be implemented in the clinical practice, the daily dental care should strongly profit thereof.</p> <p>Trial registration</p> <p>The trial is registered at ClinicalTrials.gov under ISRCTN68590603 (pilot trial) and ISRCTN97265367 (main trial).</p

Mechanical testing of thin-walled zirconia abutments

Although the use of zirconia abutments for implant-supported restorations has gained momentum with the increasing demand for esthetics, little informed design rationale has been developed to characterize their fatigue behavior under different clinical scenarios. However, to prevent the zirconia from fracturing, the use of a titanium connection in bicomponent aesthetic abutments has been suggested. OBJECTIVE: Mechanical testing of customized thin-walled titanium-zirconia abutments at the connection with the implant was performed in order to characterize the fatigue behavior and the failure modes for straight and angled abutments. MATERIAL AND METHODS: Twenty custom-made bi-component abutments were tested according to ISO 14801:2007 either at a straight or a 25º angle inclination (n=10 each group). Fatigue was conducted at 15 Hz for 5 million cycles in dry conditions at 20ºC±5ºC. Mean values and standard deviations were calculated for each group. All comparisons were performed by t-tests assuming unequal variances. The level of statistical significance was set at p≤0.05. Failed samples were inspected in a polarized-light and then in a scanning electron microscope. RESULTS: Straight and angled abutments mean maximum load was 296.7 N and 1,145 N, the dynamic loading mean F(max) was 237.4 N and 240.7 N, respectively. No significant differences resulted between the straight and angled bi-component abutments in both static (p=0.253) and dynamic testing (p=0.135). A significant difference in the bending moment required for fracture was detected between the groups (p=0.01). Fractures in the angled group occurred mainly at the point of load application, whereas in the straight abutments, fractures were located coronally and close to the thinly designed areas at the cervical region. CONCLUSION: Angled or straight thin-walled zirconia abutments presented similar F(max) under fatigue testing despite the different bending moments required for fracture. The main implication is that although zirconia angled or straight abutments presented similar mechanical behavior, the failure mode tended to be more catastrophic in straight (fracture at the cervical region) compared to angled abutments

A survey of failed post-retained restorations

Survival of endodontically treated, post-restored teeth depends on a multitude of factors, all of which are practically impossible to include in a randomized, controlled clinical study. The purpose of this survey was to characterize and analyze reported failures of post-retained restorations to identify factors critical to failure and to type of failure. A questionnaire was mailed to private practitioners in Denmark with a request to complete the questionnaire whenever a patient presented with a failed post-retained restoration. Information was gathered on factors related to the patient, the tooth, the restorative materials, and the techniques. Two-hundred and sixty questionnaires were collected from 171 practitioners over a 3-year period. Functioning time until failure varied between 3 months and 38 years. Mean survival time until failure was 11 years. Of the failed restorations, 61% had functioned for 10 years or less. Fracture of the tooth was the most common type of failure reported, followed by loosening of the post and fracture of the post. Tapered posts implied an increased risk of tooth fracture compared to loosening or fracture of the post, and the relative risk of tooth fracture increased with the functioning time until failure. Fracture of the post was more common among male than female patients. On the basis of this survey of failed post-retained restorations, it was concluded that tapered posts were associated with a higher risk of tooth fracture than were parallel-sided posts

Temporomandibular joint pathosis related to sex, age, and dentition in autopsy material

The purpose of this autopsy study was to test the hypotheses that temporomandibular joint (TMJ) arthrosis is more common in women than in men, increases with age, and is more common in edentulous persons than in those with natural teeth. Two hundred forty-eight TMJs removed at autopsy from 224 fresh cadavers were investigated macroscopically with dissection or cryosectioning. Age was found to be a significant factor in prediction of TMJ arthrosis (p p p p &lt; 0.001) between arthrosis, disk displacement, disk deformation, and disk perforation. There were no statistically significant differences in the prevalence of morphologic changes in the joints from persons with 10 or more natural teeth in each jaw compared with those from persons without natural teeth. The results of this study showed that TMJ arthrosis is more frequent in older than in younger persons. TMJ disk displacement generally appears necessary for the development of perforations. The findings of this study indicate that sex and dentition are not major factors for the development of TMJ pathosis in elderly individuals.Peer Reviewedhttp://deepblue.lib.umich.edu/bitstream/2027.42/31264/1/0000170.pd