Chandra observations of SN 1987A: the soft X-ray light curve revisited

We report on the present stage of SN 1987A as observed by the Chandra X-ray Observatory. We reanalyze published Chandra observations and add three more epochs of Chandra data to get a consistent picture of the evolution of the X-ray fluxes in several energy bands. We discuss the implications of several calibration issues for Chandra data. Using the most recent Chandra calibration files, we find that the 0.5-2.0 keV band fluxes of SN 1987A have increased by ~6 x 10 ^-13 erg s^-1 cm^-2 per year since 2009. This is in contrast with our previous result that the 0.5-2.0 keV light curve showed a sudden flattening in 2009. Based on our new analysis, we conclude that the forward shock is still in full interaction with the equatorial ring.Comment: Accepted for publication by ApJ, 7 pages, 5 figure

Processo para produção de filamentos poliméricos piezoeléctricos

A presente invenção consiste num processo para obtenção, em linha e em contínuo, de filamentos têxteis de secção variável que incluem um núcleo composto por: eléctrodos(1) revestidos por dieléctrico piezoactivo(2), que por sua vez está revestido por outro eléctrodo(3) e por uma camada isolante eléctrica(4). Adicionalmente, podem ainda ser acrescentada(s) camada(s) destinada(s) a proporcionar ao filamento uma maior estabilidade estrutural, protecção mecânica, características de toque diferentes do filamento nu ou a possibilidade de ser tingido. O processo de fabrico destes filamentos é baseado em métodos convencionais de co-extrusão nos quais são incorporados novos passos, mais concretamente o estiramento a temperatura controlada que possibilitam a obtenção da fase cristalina adequada do polímero piezoeléctrico e a polarização eléctrica do mesmo e o sistema de recirculação para activação do filamento com propriedades piezoeléctricas por polarização. O filamento piezoeléctrico apresenta propriedades mecânicas que tornam possível a sua integração completa em produtos têxteis, através de processos têxteis convencionais, permitindo a sua utilização como sensor ou actuador mecânico.Fundação para a Ciência e a Tecnologia (FCT

Physics Beyond the Standard Model: Focusing on the Muon Anomaly

We present a model based on the implication of an exceptional E_{6}-GUT symmetry for the anomalous magnetic moment of the muon. We follow a particular chain of breakings with Higgses in the 78 and 351 representations. We analyse the radiative correction contributions to the muon mass and the effects of the breaking of the so-called Weinberg symmetry. We also estimate the range of values of the parameters of our model.Comment: 14 RevTeX pages, 5 figure

Survey and modelling for the bim of Basilica of San Marco in Venice

The Basilica of San Marco is a singular case in the field of Cultural heritage, as it constitutes a construction site always active for the maintenance and preservation of the basilica itself. The continuous intervention of conservation, due to the particular environmental conditions of Venice and the opening to the public, together with the complexity of the building itself, imposes the need to identify an optimized management system. For this reason, in 2013 the Procurator of St. Marco Basilica commissioned the construction of a 3D model of the Basilica to be used for the creation of a BIM. The model must meet the required precision of the scale of 1: 50, and should also include, in addition to the geometric description, a description of the mosaic and marble surfaces of the basilica through high resolution orthophoto which are essential for the restoration of the mosaics. The complexity of the church and the large and continuous flow of public led to work in non-optimal conditions especially for the acquisition stage. The basilica has certain peculiarities that led to some important choices, for example the use of photogrammetry instead of laser scanning technique. The same technique was preferred also by the need to realize, in addition to the geometric model, high-resolution orthophotos of marbles and mosaic surfaces. The modelling of the basilica has highlighted a number of problems related to the building features. The basilica, indeed, is the result of the juxtaposition of elements (capitals, columns) with different origin, which therefore cannot be standardized in special libraries. Moreover, especially in the extensive mosaic areas, there are not edges that characterize the architecture, but only beveled surfaces. This has resulted in a change also in the modeling paradigm with the need to identify alternative systems even for the construction of simple elements. Therefore, we decided to model using NURBS since it is the method that allows greater adherence to reality and, at the same time, a model with acceptable dimensions in terms of navigation and usability. Only the most sculptural pieces such as capitals and statues have been replaced by mesh models. As we were interested in different elaborations, the results of this work are a geometric NURBS model for the subsequent insertion into BIM environment, with the possibility of extracting two-dimensional drawings such as plans and sections, a mesh model with low resolution textures for online navigation and high resolution orthophotos. The survey work and modeling has been almost completed for the interior of the basilica whereas only the external remains to be acquired and modeled. For the management of the entire work it was decided to use the data organization system already used by the Politecnico di Milano for the Duomo di Milano. The BIM3DSURVEY system will be essential not only to manage the finished model, but it has been very useful also during the construction phase because it allows us to divide the entire work into more work units. However, this system required some changes to meet the peculiarity of this BIM, in particular the need to append and link the orthophotos to real surfaces, in order to use the model also as a spatial index for the images

Extrusion of poly(vinylidene fluoride) recycled filaments : effect of the processing cycles on the degree of crystallinity and electroactive phase content

This study analyses the possibility of reprocessing used poly(vinylidene fluoride), PVDF, maintaining the main properties critical for its use in piezoelectric sensor/actuator applications. The influence of multiple reprocessing cycles of PVDF on crystallinity and ß-phase content fundamental for its electroactive behaviour, was studied. Nine reprocessing cycles were completed and it was found that the material preserved the characteristics required for its use as piezoelectric polymer without significant degradation.The authors thank the Portuguese Foundation for Science and Technology (FCT) (gs1) for financial support under Project Piezotex - PTDC (PTDC/CTM/108801/2008) and in the framework of the Strategic Project PEst-C/FIS/ UI607/20112011, PEst-C/CTM/LA0025/2011 and PEst-C/CTM/UI0264/2011. MPS thanks the FCT for financial support under grant SFRH/BD/70303/2010

Direct current control of an active power filter for harmonic elimination, power factor correction and load unbalancing compensation

An active power filter is designed, simulated, implemented, and tested. It can work in different modes: active power filtering, power factor correction, and load unbalance compensation. It is based on a current controlled voltage-source inverter with fixed carrier PWM. The control algorithm generates the source reference currents based on the controlled DC link voltage. The dimensioning criteria of the inductive and capacitive power components is discussed. The implementation is validated with simulated and experimental results obtained in a 5 kVA prototype