Improvement in the hygroscopicity of inorganic binder through a dual coating process

The use of an anti-absorbent is proposed in this work to reduce the hygroscopicity of the inorganic binder in the casting mold, in which the anti-absorbent is coated on the mold prepared with an inorganic binder. Three types of polymers were used to select material with optimal water resistance. Polystyrene (PS) and polyvinyl alcohol (PVA) were used as a water-insoluble polymer and water-soluble polymer, respectively. In addition, polyurethane (PU) prepolymer has intermediate properties between PS and PVA. PVA and PU prepolymer were used for comparative testing with PS. For this testing process, the prepared green body was dipped into a solution of inorganic binder precursor mixed with tetraethyl orthosilicate (TEOS, SiO2 precursor) and sodium methoxide (NaOMe, Na2O precursor), and then dipped into a solution of coating reagent after a drying process. Thus, these series of coating processes in a green body is called a dual coating process. Finally the sample was heat-treated at 1000 °C to generate a glass phase by an organic–inorganic conversion process. In the sample prepared with PS, the highest contact angle and a high firing strength were exhibited, independent of polymer concentration, while the sample coated with PVA showed lower green and firing strengths. When prepolymer, PU, was applied, the green strength was remarkably improved, showing lower firing strength compared with that of PS. The green and firing strengths were optimized through the dual coating process with PS. Moreover, the moisture-proof effect of the dual coating process was verified through the moisture steam test

The ancient phosphatidylinositol 3-kinase signaling system is a master regulator of energy and carbon metabolism in algae

Algae undergo a complete metabolic transformation under stress by arresting cell growth, inducing autophagy and hyperaccumulating biofuel precursors such as triacylglycerols and starch. However, the regulatory mechanisms behind this stress-induced transformation are still unclear. Here, we use biochemical, mutational, and “omics” approaches to demonstrate that PI3K signaling mediates the homeostasis of energy molecules and influences carbon metabolism in algae. In Chlamydomonas reinhardtii, the inhibition and knockdown (KD) of algal class III PI3K led to significantly decreased cell growth, altered cell morphology, and higher lipid and starch contents. Lipid profiling of wild-type and PI3K KD lines showed significantly reduced membrane lipid breakdown under nitrogen starvation (-N) in the KD. RNA-seq and network analyses showed that under -N conditions, the KD line carried out lipogenesis rather than lipid hydrolysis by initiating de novo fatty acid biosynthesis, which was supported by tricarboxylic acid cycle down-regulation and via acetyl-CoA synthesis from glycolysis. Remarkably, autophagic responses did not have primacy over inositide signaling in algae, unlike in mammals and vascular plants. The mutant displayed a fundamental shift in intracellular energy flux, analogous to that in tumor cells. The high free fatty acid levels and reduced mitochondrial ATP generation led to decreased cell viability. These results indicate that the PI3K signal transduction pathway is the metabolic gatekeeper restraining biofuel yields, thus maintaining fitness and viability under stress in algae. This study demonstrates the existence of homeostasis between starch and lipid synthesis controlled by lipid signaling in algae and expands our understanding of such processes, with biotechnological and evolutionary implications.Ministry of Science, ICT and Future Planning 2015M3A6A2065697Ministry of Oceans and Fisheries 2015018

Characteristics of DSSC Panels with Silicone Encapsulant

Dye-sensitized solar cells (DSSC) allow light transmission and the application of various colors that make them especially suitable for building-integrated PV (BIPV) application. In order to apply DSSC modules to windows, the module has to be panelized: a DSSC module should be protected with toughened glass on the entire surface. Up to the present, it seems to be common to use double glazing with DSSC modules, with air gaps between the glass pane and the DSSC modules. Few studies have been conducted on the characteristics of various glazing methods with DSSC modules. This paper proposes a paneling method that uses silicone encapsulant, analyzing the performance through experimentation. Compared to a multilayered DSSC panel with an air gap, the encapsulant-applied panel showed 6% higher light transmittance and 7% higher electrical efficiency. The encapsulant also prevented electrolyte leakage by strengthening the seals in the DSSC module

Biochemical characterization of a recombinant Japanese encephalitis virus RNA-dependent RNA polymerase

<p>Abstract</p> <p>Background</p> <p>Japanese encephalitis virus (JEV) NS5 is a viral nonstructural protein that carries both methyltransferase and RNA-dependent RNA polymerase (RdRp) domains. It is a key component of the viral RNA replicase complex that presumably includes other viral nonstructural and cellular proteins. The biochemical properties of JEV NS5 have not been characterized due to the lack of a robust <it>in vitro </it>RdRp assay system, and the molecular mechanisms for the initiation of RNA synthesis by JEV NS5 remain to be elucidated.</p> <p>Results</p> <p>To characterize the biochemical properties of JEV RdRp, we expressed in <it>Escherichia coli </it>and purified an enzymatically active full-length recombinant JEV NS5 protein with a hexahistidine tag at the N-terminus. The purified NS5 protein, but not the mutant NS5 protein with an Ala substitution at the first Asp of the RdRp-conserved GDD motif, exhibited template- and primer-dependent RNA synthesis activity using a poly(A) RNA template. The NS5 protein was able to use both plus- and minus-strand 3'-untranslated regions of the JEV genome as templates in the absence of a primer, with the latter RNA being a better template. Analysis of the RNA synthesis initiation site using the 3'-end 83 nucleotides of the JEV genome as a minimal RNA template revealed that the NS5 protein specifically initiates RNA synthesis from an internal site, U₈₁, at the two nucleotides upstream of the 3'-end of the template.</p> <p>Conclusion</p> <p>As a first step toward the understanding of the molecular mechanisms for JEV RNA replication and ultimately for the <it>in vitro </it>reconstitution of viral RNA replicase complex, we for the first time established an <it>in vitro </it>JEV RdRp assay system with a functional full-length recombinant JEV NS5 protein and characterized the mechanisms of RNA synthesis from nonviral and viral RNA templates. The full-length recombinant JEV NS5 will be useful for the elucidation of the structure-function relationship of this enzyme and for the development of anti-JEV agents.</p

Design Elements and Electrical Performance of a Bifacial BIPV Module

Bifacial BIPV systems have great potential when applied to buildings given their use of a glass-to-glass structure. However, the performance of bifacial solar cells depends on a variety of design factors. Therefore, in order to apply bifacial solar cells to buildings, a bifacial PV module performance analysis should be carried out, including consideration of the various design elements and reflecting a wide range of installation conditions. This study focuses on the performance of a bifacial BIPV module applied to a building envelope. The results here show that the design elements of reflectivity and the transparent space ratio have the greatest impact on performance levels. The distance between the module and the wall had less of an impact on performance. The bifacial BIPV module produced output up to 30% greater than the output of monofacial PV modules, depending on the design elements. Bifacial BIPV modules themselves should have transparent space ratios of at least 30%. When a dark color is used on the external wall with reflectivity of 50% or less, bifacial BIPV modules with transparent space ratios of 40% and above should be used. In order to achieve higher performance through the installation of bifacial BIPV modules, design conditions which facilitate reflectivity exceeding 50% and a transparent space ratio which exceeds 30% must be met

Time-resolved pathogenic gene expression analysis of the plant pathogen Xanthomonas oryzae pv. oryzae

Virulence of wild-type and mutant Xoo strains on rice. (DOCX 16 kb

Traffic Convexity Aware Cellular Networks: A Vehicular Heavy User Perspective

Rampant mobile traffic increase in modern cellular networks is mostly caused by large-sized multimedia contents. Recent advancements in smart devices as well as radio access technologies promote the consumption of bulky content, even for people in moving vehicles, referred to as vehicular heavy users. In this article the emergence of vehicular heavy user traffic is observed by field experiments conducted in 2012 and 2015 in Seoul, Korea. The experiments reveal that such traffic is becoming dominant, captured by the 8.62 times increase in vehicular heavy user traffic while the total traffic increased 3.04 times. To resolve this so-called vehicular heavy user problem (VHP), we propose a cell association algorithm that exploits user demand diversity for different velocities. This user traffic pattern is discovered first by our field trials, which is convex-shaped over velocity, i.e. walking user traffic is less than stationary or vehicular user traffic. As the VHP becomes severe, numerical evaluation verifies the proposed user convexity aware association outperforms a well-known load balancing association in practice, cell range expansion (CRE). In addition to the cell association, several complementary techniques are suggested in line with the technical trend toward 5G.Comment: 15 pages, 5 figures, 1 table, to appear in IEEE Wireless Communications Magazin