Investigation of wheat coleoptile response to phototropic stimulations

This report provides a summary of the preparations for, and the conduct and post-flight data analysis of, the Spacelab flight investigation FOTRAN, which flew on the IML-1 mission (STS-42) in January, 1992. The investigation was designed to provide data on the responses of wheat seedlings to various blue-light stimuli given while the plants were exposed to orbital microgravity conditions. Before the flight, a number of hypotheses were established which were to be tested by the data from the flight and parallel ground studies. A description of the experiment protocol developed for the mission is provided, and an account of the activities supported during preparations for and support of the flight experiment is given. Details of the methods used to reduce and analyze the data from the flight are outlined

The psychological toll of prostate cancer

© 2018, Springer Nature Limited. Matta et al. report that men with prostate cancer who underwent surgery or radiotherapy, but not active surveillance, had greater odds of receiving antidepressants than controls. However, methodological limitations preclude the interpretation of a psychological benefit for men on active surveillance. Screening for distress and referral to evidence-based intervention should be a priority

A proposal to determine properties of the gravitropic response of plants in the absence of a complicating g-force (GTHRES)

Gravitropic responses of oat seedlings (Avena sativa L.) were measured on Earth and in microgravity (IML-1). The seedlings were grown at 1 g either on Earth or on 1 g centrifuges. They were challenged by centripetal accelerations for which the intensity and duration of the stimulations were varied. All stimulation intensities were in the hypogravity region from 0.1 to 1.0 g. All responses occurred either in Spacelab microgravity or during clinorotation on Earth. The experiments were carried out with the same apparatus in Spacelab and on Earth. The experiments addressed a series of scientific questions and useful data were obtained to provide answers to some but not all of those questions

Prostate cancer survivorship care: If not now, when?

Prostate cancer is the most common cancer diagnosed in Australian men, excluding non-melanoma skin cancer, and it is estimated that there are over 220 000 Australian men living with a diagnosis of prostate cancer [1]. Survival for men with prostate cancer is excellent in countries that have accessible screening and treatment services, and in Australia 5-year relative survival is over 95% [1]. High incidence, coupled with improving long-term survival, leads to a correspondingly high prevalence rate and high community disease burden. Many men with prostate cancer experience long-term decrements in their mental and physical quality of life, overall they have a greater suicide risk than their non-cancer peers, and unmet supportive care needs are pervasive [2]. In this context, survivorship care for men with prostate cancer is crucial in both the short and long term. The recent development of a Prostate Cancer Survivorship Essentials Framework in the Australian and New Zealand setting provides an example of a regional response to this issue that delivers guidance for policy makers, clinicians, community and consumers on what is essential for step change in prostate cancer survivorship outcomes [3]

Seismic capacity comparison between square and circular plan adobe construction

Unreinforced adobe or mud-brick structures have in the past suffered severe damage from seismic forces and have caused a vast number of deaths. However, a number of adobe buildings located in seismic regions have performed well under several seismic events. Most of these traditional buildings' shapes are symmetrical which has significant bearing on the performance of the building during strong earthquakes. This paper presents an experimental comparison between two symmetrical shapes, i.e., a square and a circular model of unreinforced adobe walls. One-third scale models were built and tested using a static tilt test for seismic performance evaluation of both structures. The adobe house models were subjected to a constant acceleration when tilted on a tilt-up table. The lateral component of model weight was used as a parameter to quantify the maximum seismic force for each model. The paper describes the configuration of both specimens and testing method. The results of these comparative experiments indicated a better performance of the circular structure. There are simple and effective solutions for construction of new adobe buildings located in seismic hazard areas which can assist in decreasing damage and death

El comportamiento térmico de los edificios de tierra

This paper examines the theoretical basis for the thermal performance of earth walls and links it to some test results on buildings constructed by the author, and to their predicted performance using a sophisticated computer modelling program. The analysis shows that for all earth walls the steady state thermal resistance is low but that for walls greater than about 450 mm thick the cyclic thermal resistance is high and increases exponentially. Whilst the steady state resistance of all thickness walls is low and results in higher than normal average temperatures in summer and lower than normal in winter the ability of thick earth walls to even out the swings in temperature is thought to be responsible for the materials reputation. The paper notes that good passive design principles (such as providing internal thermal mass and large areas of glazing for winter performance) will greatly improve the performance of earth buildings with thin walls, but it is the author’s opinion that external earth walls should be at least 450 mm thick to gain the full benefit of thermal mass.Este artículo examina la base teórica del comportamiento térmico de las paredes de tierra y la relaciona con varios resultados de test realizados sobre edificios construidos por el autor, y con su comportamiento previsto utilizando un sofisticado programa de modelado por ordenador. El análisis muestra que la resistencia térmica constante es baja para todas las paredes de tierra, pero que para muros con un grosor mayor que 450 mm la resistencia térmica cíclica es alta y se incrementa exponencialmente. Mientras que la resistencia térmica constante de las paredes de cualquier grosor es baja y se traduce en temperaturas más altas que la media en verano y más bajas que la media en invierno, la capacidad de las paredes gruesas de tierra para amortiguar las variaciones de temperatura es la responsable de la reputación de los materiales. El artículo señala que los principios de un buen diseño pasivo (tales como proporcionar inercia térmica y grandes áreas acristaladas para el comportamiento en invierno) mejorarán enormemente el comportamiento de las construcciones de tierra con paredes delgadas, pero en opinión del autor las paredes exteriores deberían ser de al menos 450 mm para aprovecharse de todos los beneficios de la inercia térmica

Experimental demonstration of painting arbitrary and dynamic potentials for Bose-Einstein condensates

There is a pressing need for robust and straightforward methods to create potentials for trapping Bose-Einstein condensates which are simultaneously dynamic, fully arbitrary, and sufficiently stable to not heat the ultracold gas. We show here how to accomplish these goals, using a rapidly-moving laser beam that "paints" a time-averaged optical dipole potential in which we create BECs in a variety of geometries, including toroids, ring lattices, and square lattices. Matter wave interference patterns confirm that the trapped gas is a condensate. As a simple illustration of dynamics, we show that the technique can transform a toroidal condensate into a ring lattice and back into a toroid. The technique is general and should work with any sufficiently polarizable low-energy particles.Comment: Minor text changes and three references added. This is the final version published in New Journal of Physic

“I Wouldn’t Want to Be a Gender Expert:” Gender Experts in Peace Mediation

Peace mediation is a professional practice that is increasingly reliant on thematic technical experts, including gender experts. The strategy of including gender expertise in peace mediation reflects the Women, Peace and Security agenda and the call to include dedicated gender expertise in all peacemaking efforts. Based on interviews with peace mediation practitioners, the article analyzes the role of gender experts in peace mediation. We argue that there is a tension between the art of mediation and the art of gender expertise that reflects the gendered power dynamics of peace mediation. We conclude that the strategy of appointing gender experts to peace mediation teams will not “dismantle the master’s house.” However, we acknowledge that without a gender expert very little will be accomplished on this issue. For peace mediation to address the gendered foundations of conflict we argue for the development of an alternate feminist peace mediation practice

High-resolution imaging of ultracold fermions in microscopically tailored optical potentials

We report on the local probing and preparation of an ultracold Fermi gas on the length scale of one micrometer, i.e. of the order of the Fermi wavelength. The essential tool of our experimental setup is a pair of identical, high-resolution microscope objectives. One of the microscope objectives allows local imaging of the trapped Fermi gas of 6Li atoms with a maximum resolution of 660 nm, while the other enables the generation of arbitrary optical dipole potentials on the same length scale. Employing a 2D acousto-optical deflector, we demonstrate the formation of several trapping geometries including a tightly focussed single optical dipole trap, a 4x4-site two-dimensional optical lattice and a 8-site ring lattice configuration. Furthermore, we show the ability to load and detect a small number of atoms in these trapping potentials. A site separation of down to one micrometer in combination with the low mass of 6Li results in tunneling rates which are sufficiently large for the implementation of Hubbard-models with the designed geometries.Comment: 15 pages, 6 figure

Characterizing the role of the pre‐SMA in the control of speed/accuracy trade‐off with directed functional connectivity mapping and multiple solution reduction

Several plausible theories of the neural implementation of speed/accuracy trade‐off (SAT), the phenomenon in which individuals may alternately emphasize speed or accuracy during the performance of cognitive tasks, have been proposed, and multiple lines of evidence point to the involvement of the pre‐supplemental motor area (pre‐SMA). However, as the nature and directionality of the pre‐SMA’s functional connections to other regions involved in cognitive control and task processing are not known, its precise role in the top‐down control of SAT remains unclear. Although recent advances in cross‐sectional path modeling provide a promising way of characterizing these connections, such models are limited by their tendency to produce multiple equivalent solutions. In a sample of healthy adults (N = 18), the current study uses the novel approach of Group Iterative Multiple Model Estimation for Multiple Solutions (GIMME‐MS) to assess directed functional connections between the pre‐SMA, other regions previously linked to control of SAT, and regions putatively involved in evidence accumulation for the decision task. Results reveal a primary role of the pre‐SMA for modulating activity in regions involved in the decision process but suggest that this region receives top‐down input from the DLPFC. Findings also demonstrate the utility of GIMME‐MS and solution‐reduction methods for obtaining valid directional inferences from connectivity path models.Peer Reviewedhttps://deepblue.lib.umich.edu/bitstream/2027.42/149347/1/hbm24493.pdfhttps://deepblue.lib.umich.edu/bitstream/2027.42/149347/2/hbm24493_am.pd