Dip coating process: Silicon sheet growth development for the large-area silicon sheet task of the low-cost silicon solar array project

The research program to investigate the technical and economic feasibility of producing solar-cell-quality sheet silicon by dip-coating one surface of carbonized ceramic substrates with a thin layer of large-grain polycrystalline silicon is reported. The initial effort concentrated on the design and construction of the experimental dip-coating facility. The design was completed and its experimental features are discussed. Current status of the program is reported, including progress toward solar cell junction diffusion and miscellaneous ceramic substrate procurement

THE EFFECTS OF ISOPROPYL N-PHENYL CARBAMATE ON THE GREEN ALGA OEDOGONIUM CARDIACUM : I. Cell Division

Cell division in vegetative filaments of the green alga Oedogonium cardiacum is presented as an experimental system. We report on how we have used this system to study the effects of isopropyl N-phenylcarbamate (IPC) on the mitotic apparatus and on the phycoplast, a planar array of cytokinetic microtubules. Polymerization of microtubules was prevented when filaments, synchronized by a light/dark regime and chilled (2°C) while in metaphase or just before phycoplast formation, were exposed to 5.5 x 10-4 M IPC and then returned to room temperature. Spindles reformed or phycoplasts formed when these filaments were transferred to growth medium free of IPC. However, the orientation of both microtubular systems was disturbed: the mitotic apparatus often contained three poles, frequently forming three daughter nuclei upon karyokinesis; the phycoplast was often stellate rather than planar, and it sometimes was displaced to the side of both daughter nuclei, resulting in a binucleate and an anucleate cell upon cytokinesis. Our results suggest that IPC (a) prevents the assembly of microtubules, (b) increases the number of functional polar bodies, and (c) affects the orientation of microtubules in O. cardiacum. High voltage (1,000 kV) electron microscopy of 0.5-µm thick sections allowed us to visualize the polar structures, which were not discernible in thin sections

Dip coating process: Silicon sheet growth development for the large-area silicon sheet task of the low-cost silicon solar array project

To date, an experimental dip-coating facility was constructed. Using this facility, relatively thin (1 mm) mullite and alumina substrates were successfully dip-coated with 2.5 - 3.0 ohm-cm, p-type silicon with areas of approximately 20 sq cm. The thickness and grain size of these coatings are influenced by the temperature of the melt and the rate at which the substrate is pulled from the melt. One mullite substrate had dendrite-like crystallites of the order of 1 mm wide and 1 to 2 cm long. Their axes were aligned along the direction of pulling. A large variety of substrate materials were purchased or developed enabling the program to commence a substrate definition evaluation. Due to the insulating nature of the substrate, the bottom layer of the p-n junction may have to be made via the top surface. The feasibility of accomplishing this was demonstrated using single crystal wafers

Serum anti-Müllerian hormone concentrations before and after treatment of an ovarian granulosa cell tumour in a cat

Case summary A 15-year-old female cat was presented for investigation of progressive behavioural changes, polyuria, polydipsia and periuria. An ovarian granulosa cell tumour was identified and the cat underwent therapeutic ovariohysterectomy (OHE). The cat’s clinical signs resolved, but 6 months later it was diagnosed as having an anaplastic astrocytoma and was euthanased. Serum anti-Müllerian hormone (AMH) concentration prior to OHE was increased vs a control group of entire and neutered female cats. Following OHE, serum AMH concentration decreased to <1% of the original value. Relevance and novel information Serum AMH measurement may represent a novel diagnostic and monitoring tool for functional ovarian neoplasms in cats

Silicon-on-ceramic process: Silicon sheet growth and device development for the large-area silicon sheet task of the low-cost solar array project

The technical feasibility of producing solar cell quality sheet silicon to meet the DOE 1986 cost goal of 70 cents/watt was investigated. The silicon on ceramic approach is to coat a low cost ceramic substrate with large grain polycrystalline silicon by unidirectional solidification of molten silicon. Results and accomplishments are summarized

Trends in stratospheric minor constituents

Photochemical models predict that increasing source gas concentrations are also expected to lead to changes in the concentrations of both catalytically active radical species (such as NO2, ClO, and OH) and inactive reservoir species (such as HNO3, HCl, and H2O). For simplicity, we will refer to all these as trace species. Those species that are expected to have increasing concentration levels are investigated. Additionally, the trace species concentration levels are monitored for unexpected changes on the basis of the measure increase in source gases. Carrying out these investigations is difficult due to the limited data base of measurements of stratospheric trace species. In situ measurements are made only infrequently, and there are few satelliteborne measurements, most over a time space insufficient for trend determination. Instead, ground-based measurements of column content must be used for many species, and interpretation is complicated by contributions from the troposphere or mesosphere or both. In this chapter, we examine existing measurements as published or tabulated

Rare regions of the susceptible-infected-susceptible model on Barabási-Albert networks

I extend a previous work to susceptible-infected-susceptible (SIS) models on weighted Barabási-Albert scale-free networks. Numerical evidence is provided that phases with slow, power-law dynamics emerge as the consequence of quenched disorder and tree topologies studied previously with the contact process. I compare simulation results with spectral analysis of the networks and show that the quenched mean-field (QMF) approximation provides a reliable, relatively fast method to explore activity clustering. This suggests that QMF can be used for describing rare-region effects due to network inhomogeneities. Finite-size study of the QMF shows the expected disappearance of the epidemic threshold λc in the thermodynamic limit and an inverse participation ratio ∼0.25, meaning localization in case of disassortative weight scheme. Contrarily, for the multiplicative weights and the unweighted trees, this value vanishes in the thermodynamic limit, suggesting only weak rare-region effects in agreement with the dynamical simulations. Strong corrections to the mean-field behavior in case of disassortative weights explains the concave shape of the order parameter ρ(λ) at the transition point. Application of this method to other models may reveal interesting rare-region effects, Griffiths phases as the consequence of quenched topological heterogeneities

Extensive and Intimate Association of the Cytoskeleton with Forming Silica in Diatoms: Control over Patterning on the Meso- and Micro-Scale

BACKGROUND: The diatom cell wall, called the frustule, is predominantly made out of silica, in many cases with highly ordered nano- and micro-scale features. Frustules are built intracellularly inside a special compartment, the silica deposition vesicle, or SDV. Molecules such as proteins (silaffins and silacidins) and long chain polyamines have been isolated from the silica and shown to be involved in the control of the silica polymerization. However, we are still unable to explain or reproduce in vitro the complexity of structures formed by diatoms. METHODS/PRINCIPAL FINDING: In this study, using fluorescence microscopy, scanning electron microscopy, and atomic force microscopy, we were able to compare and correlate microtubules and microfilaments with silica structure formed in diversely structured diatom species. The high degree of correlation between silica structure and actin indicates that actin is a major element in the control of the silica morphogenesis at the meso and microscale. Microtubules appear to be involved in the spatial positioning on the mesoscale and strengthening of the SDV. CONCLUSIONS/SIGNIFICANCE: These results reveal the importance of top down control over positioning of and within the SDV during diatom wall formation and open a new perspective for the study of the mechanism of frustule patterning as well as for the understanding of the control of membrane dynamics by the cytoskeleton