89 research outputs found
Channel Estimation for Ambient Backscatter Communication Systems with Massive-Antenna Reader
Ambient backscatter, an emerging green communication technology, has aroused
great interest from both academia and industry. One open problem for ambient
backscatter communication (AmBC) systems is channel estimation for a
massive-antenna reader. In this paper, we focus on channel estimation problem
in AmBC systems with uniform linear array (ULA) at the reader which consists of
large number of antennas. We first design a two-step method to jointly estimate
channel gains and direction of arrivals (DoAs), and then refine the estimates
through angular rotation. Additionally, Cramer-Rao lower bounds (CRLBs) are
derived for both the modulus of the channel gain and the DoA estimates.
Simulations are then provided to validate the analysis, and to show the
efficiency of the proposed approach.Comment: 5 figures, submitted to IEEE Transactions on Vehicular Technology, 29
March, 201
Resource Allocation for Device-to-Device Communications in Multi-Cell Multi-Band Heterogeneous Cellular Networks
Heterogeneous cellular networks (HCNs) with millimeter wave (mm-wave)
communications are considered as a promising technology for the fifth
generation mobile networks. Mm-wave has the potential to provide multiple
gigabit data rate due to the broad spectrum. Unfortunately, additional free
space path loss is also caused by the high carrier frequency. On the other
hand, mm-wave signals are sensitive to obstacles and more vulnerable to
blocking effects. To address this issue, highly directional narrow beams are
utilized in mm-wave networks. Additionally, device-to-device (D2D) users make
full use of their proximity and share uplink spectrum resources in HCNs to
increase the spectrum efficiency and network capacity. Towards the caused
complex interferences, the combination of D2D-enabled HCNs with small cells
densely deployed and mm-wave communications poses a big challenge to the
resource allocation problems. In this paper, we formulate the optimization
problem of D2D communication spectrum resource allocation among multiple
micro-wave bands and multiple mm-wave bands in HCNs. Then, considering the
totally different propagation conditions on the two bands, a heuristic
algorithm is proposed to maximize the system transmission rate and approximate
the solutions with sufficient accuracies. Compared with other practical
schemes, we carry out extensive simulations with different system parameters,
and demonstrate the superior performance of the proposed scheme. In addition,
the optimality and complexity are simulated to further verify effectiveness and
efficiency.Comment: 13 pages, 11 figures, IEEE Transactions on Vehicular Technolog
Design and Test of a High QoS Radio Network for CBTC Systems in Subway Tunnels
Communications Based Train Control Systems require high quality radio data communications for train signaling and control. Actually most of these systems use 2.4GHz band with proprietary radio transceivers and leaky feeder as distribution system. All them demand a high QoS radio network to improve the efficiency of railway networks. We present narrow band, broad band and data correlated measurements taken in Madrid underground with a transmission system at 2.4 GHz in a test network of 2 km length in subway tunnels. The architecture proposed has a strong overlap in between cells to improve reliability and QoS. The radio planning of the network is carefully described and modeled with narrow band and broadband measurements and statistics. The result is a network with 99.7% of packets transmitted correctly and average propagation delay of 20ms. These results fulfill the specifications QoS of CBTC systems
Shadow fading cross-correlation of multi-frequencies in curved subway tunnels
Radio propagation characteristics in curved tunnels are important for designing reliable communications in subway systems. In this paper, shadow fading is characterized, and cross-correlation property of shadow fading for different frequency bands is investigated based on empirical measurements. The measurements were conducted in two types of curved subway tunnels with 300 m and 500 m radii of curvatures at 980 MHz, 2400 MHz, and 5705 MHz, respectively. The impact of antenna polarization and propagation environment on shadow fading correlation at the receiver is evaluated. It is found that shadow fading with horizontal polarized antenna exhibits less correlation than with vertical polarized antenna. Strong independence of shadowing correlation and tunnel type is observed. Furthermore, a heuristic explanation of the particular shadowing correlation property in subway tunnel is presented
Ultrawideband MIMO Channel Measurements and Modeling in a Warehouse Environment
This paper presents a detailed description of a propagation channel measurement campaign performed in a warehouse environment and provide a comprehensive channel model for this environment. Using a vector network analyzer (VNA), we explored both Line-of-sight(LOS) and Non-Line-of-sight (NLOS) scenarios over a 2-8 GHz frequency range. We extracted both small-scale and large-scale channel parameters such as distance-dependent pathloss exponent (n), frequency-dependent pathloss exponent (k), shadowing variance, and amplitude fading statistics of the channel. We also provide the clustering analysis of the channel impulse responses by using a modified Saleh-Valenzuela approach. Our model is validated by comparing the distributions of the root-mean-square (RMS) delay spread obtained from our model and measurement data, respectively. The model developed can be used for realistic performance evaluations of ultrawideband (UWB) communications and localization systems in warehouse environments
Propagation Mechanism modeling in the Near-Region of Arbitrary Cross-Sectional Tunnels.
Along with the increase of the use of working frequencies in advanced radio communication systems, the near-region inside tunnels lengthens considerably and even occupies the whole propagation cell or the entire length of some short tunnels. This paper analytically models the propagation mechanisms and their dividing point in the near-region of arbitrary cross-sectional tunnels for the first time. To begin with, the propagation losses owing to the free space mechanism and the multimode waveguide mechanism are modeled, respectively. Then, by conjunctively employing the propagation theory and the three-dimensional solid geometry, the paper presents a general model for the dividing point between two propagation mechanisms. It is worthy to mention that this model can be applied in arbitrary cross-sectional tunnels. Furthermore, the general dividing point model is specified in rectangular, circular, and arched tunnels, respectively. Five groups of measurements are used to justify the model in different tunnels at different frequencies. Finally, in order to facilitate the use of the model, simplified analytical solutions for the dividing point in five specific application situations are derived. The results in this paper could help deepen the insight into the propagation mechanisms in tunnels
Ray-Based Statistical Propagation Modeling for Indoor Corridor Scenarios at 15 GHz
According to the demands for fifth-generation (5G) communication systems, high frequency bands (above 6 GHz) need to be adopted to provide additional spectrum. This paper investigates the characteristics of indoor corridor channels at 15 GHz. Channel measurements with a vector network analyzer in two corridors were conducted. Based on a ray-optical approach, a deterministic channel model covering both antenna and propagation characteristic is presented. The channel model is evaluated by comparing simulated results of received power and root mean square delay spread with the corresponding measurements. By removing the impact of directional antennas from the transmitter and receiver, a path loss model as well as small-scale fading properties for typical corridors is presented based on the generated samples from the deterministic model. Results show that the standard deviation of path loss variation is related to the Tx height, and placing the Tx closer to the ceiling leads to a smaller fluctuation of path loss
Statistical Modeling of Ultrawideband MIMO Propagation Channel in a Warehouse Environment
This paper describes an extensive propagation channel measurement campaign in a warehouse environment for line-of-sight (LOS) and nonline-of-sight (NLOS) scenarios. The measurement setup employs a vector network analyzer operating in the 2-8-GHz frequency band combined with an 8Ă—8 virtual multiple-input multiple-output (MIMO) antenna array. We develop a comprehensive statistical propagation channel model based on high-resolution extraction of multipath components and subsequent spatiotemporal clustering analysis. The intracluster direction of departure (DoD), direction of arrival (DoA), and the time of arrival (ToA) are independent, both for the LOS and NLOS scenarios. The intracluster DoD and DoA can be approximated by the Laplace distribution, and the intracluster ToA can be approximated by an exponential mixture distribution. The intercluster analysis, however, shows a dependency between the cluster DoD, DoA, and ToA. To capture this dependency, we separately model the clusters caused by single and multiple bounce scattering along the aisles in the warehouse. The intercluster DoD distribution follows a Laplace distribution, while the cluster DoA conditioned on the DoD is approximated by a Gaussian mixture distribution. The model was validated using the capacity and delay-spread values
- …