Force microscopy of layering and friction in an ionic liquid

The mechanical properties of the ionic liquid 1-butyl-1-methylpyrrolidinium tris(pentafluoroethyl) trifluorophosphate ([Py1,4][FAP]) in confinement between a SiOx and a Au(1 1 1) surface are investigated by means of atomic force microscopy (AFM) under electrochemical control. Up to 12 layers of ion pairs can be detected through force measurements while approaching the tip of the AFM to the surface. The particular shape of the force versus distance curve is explained by a model for the interaction between tip, gold surface and ionic liquid, which assumes an exponentially decaying oscillatory force originating from bulk liquid density correlations. Jumps in the tip–sample distance upon approach correspond to jumps of the compliant force sensor between branches of the oscillatory force curve. Frictional force between the laterally moving tip and the surface is detected only after partial penetration of the last double layer between tip and surface

On the classification of Kahler-Ricci solitons on Gorenstein del Pezzo surfaces

We give a classification of all pairs (X,v) of Gorenstein del Pezzo surfaces X and vector fields v which are K-stable in the sense of Berman-Nystrom and therefore are expected to admit a Kahler-Ricci solition. Moreover, we provide some new examples of Fano threefolds admitting a Kahler-Ricci soliton.Comment: 21 pages, ancillary files containing calculations in SageMath; minor correction

Relationship Between Plasma Glucose Levels and Malignant Uterine Cervical Neoplasias

Background There is a direct correlation between glycemic load and the risk of developing many malignant neoplasms. Aims The aim of this study was to determine the plasma glucose levels in women with cervical cancer. Methods The study included 177 women with anatomopathologically diagnosed uterine cervical cancer (stages 0–IV) treated between 1980 and 2008 at the Gynecology and Obstetrics outpatient service of the UFTM, Brazil. The plasma glucose levels of all patients were assayed at the time of diagnosis and correlated with tumor staging. Results We statistically compared the plasma glucose levels of group 1 (cervical intraepithelial neoplasia 2–3), group 2 (stage I–II), group 3 (stage III–IV), and group 4 (control group: leiomyomas). Patient groups with poor prognosis (groups 2 and 3) showed significantly higher plasma glucose levels ( P 90 mg/dl showed CIN versus I/II: P = 0.0753; OR = 2.018; (95% CI: 0.9236 to 4.410) and CIN versus III/IV: P = 0.0975; OR = 2.400; (95% CI: 0.8335 to 6.911). Conclusion We observed an association between high plasma glucose levels and cervical cancer cases with poor prognoses. Plasma glucose tests should be routinely used as additional prognostic parameters in patients with cervical neoplasias

The distribution of burden of dental caries in schoolchildren: a critique of the high-risk caries prevention strategy for populations

BACKGROUND: The 'high-risk approach' is a commonly adopted strategy recommended for the prevention of dental caries in populations. The scientific basis for the strategy has been questioned. The objective of this study is to assess the contribution that children identified at 'high-risk' made towards the total of new caries lesions over a 4-year period, by analysing the distribution of new lesions per 100 children. METHODS: Data are from the National Preventive Dentistry Demonstration Programme (NPDDP) in the United States. The analyses identified the distribution of new carious lesions over a 4-year period in four groups of 7 year-old children who received differing preventive regimes. RESULTS: The majority of new lesions occurred in those children classified at lowest caries risk at baseline. Irrespective of the preventive regime adopted and the initial caries levels, children classified as 'highest risk' contributed less than 6% of the total number of new lesions developing over 4 years. CONCLUSION: These findings challenge the basis for the adoption of a high-risk strategy

Photoluminescence of High Quality Epitaxial p-type InN

Indium nitride (InN) is a group III-V semiconductor that is part of the Al,Ga:N family. It is an infrared bandgap semiconductor with great potential for use in photovoltaic applications. Being an intrinsically n-type material, p-type doping is naturally one of the ongoing hot topics in InN research, which is of interest in the fabrication of pn junctions. Plasma-assisted molecular beam epitaxy (PAMBE) grown Mg doped InN thin film was investigated via systematic optical characterizations. Photoluminescence (PL) measurement has been a key part of the research, exhibiting a wide range of spectral lines between 0.54 and 0.67 eV. In a critical Mg concentration range of 2.6×10¹⁷ and 1.0×10¹⁸ cm⁻³, a strong luminescence line at 0.6 eV has been associated with a Mg-related deep acceptor. Correspondingly, a variable magnetic field Hall (VFH) effect measurement has successfully probed a buried hole-mediated conductivity path underneath a surface electron accumulation layer. This specific doping range also led to a manifestation of a “true” band-to-band transition at 0.67 eV. Such an observation has not previously been reported for InN and in our case this assignment is convincingly supported by the quadratic characteristic of the excitation power law. This established that a rigorous control of Mg flux can sufficiently compensate the background electron concentration of InN via the substitutional incorporation on In sites (Mg_In). However, introduction of donor-like complexes somewhat suppressed this process if too much Mg or even alternative dopants such as Zn and Mn were used. Also distinctively observed was a strongly quenched PL quantum efficiency from heavily doped films, where time-resolved differential transmission (TRDT) measurement showed a biexponential carrier lifetime decay curve owing to the onset of Auger recombination processes. These observations certainly have profound implications for devices and beyond

Textures And Traction: How Tube-Dwelling Polychaetes Get A Leg Up

By controlling the traction between its body and the tube wall, a tube-dwelling polychaete can move efficiently from one end of its tube to the other, brace its body during normal functions (e.g., ventilation and feeding), and anchor within its tube avoiding removal by predators. To examine the potential physical interaction between worms and the tubes they live in, scanning electron microscopy was used to reveal and quantify the morphology of worm bodies and the tubes they produce for species representing 13 families of tube-dwelling polychaetes. In the tubes of most species there were macroscopic or nearly macroscopic (~10 μm–1 mm) bumps or ridges that protruded slightly into the lumen of the tube; these could provide purchase as a worm moves or anchors. At this scale (~10 μm-1 mm), the surfaces of the chaetal heads that interact with the tube wall were typically small enough to fit within spaces between these bumps (created by the inward projection of exogenous materials incorporated into the tube wall) or ridges (made by secretions on the interior surface of the tube). At a finer scale (0.01–10 μm), there was a second overlap in size, usually between the dentition on the surfaces of chaetae that interact with the tube walls and the texture provided by the secreted strands or microscopic inclusions of the inner linings. These linings had a surprising diversity of micro-textures. The most common micro-texture was a “fabric” of secreted threads, but there were also orderly micro-ridges, wrinkles, and rugose surfaces provided by microorganisms incorporated into the inner tube lining. Understanding the fine structures of tubes in conjunction with the morphologies of the worms that build them gives insight into how tubes are constructed and how worms live within them

Rapid, sensitive, type specific PCR detection of the E7 region of human papillomavirus type 16 and 18 from paraffin embedded sections of cervical carcinoma

Human papillomavirus (HPV) infection, and in particularly infection with HPVs 16 and 18, is a central carcinogenic factor in the uterine cervix. We established and optimized a PCR assay for the detection and discrimination of HPV types 16 and 18 in archival formaldehyde fixed and paraffin embedded (FFPE) sections of cervical cancer