The Influence of Sample Volume Applied to the Makler Sperm Counting Chamber Upon the Measured Concentration of Latex Beads: A Multi-Centre Study

Objective: To undertake a multi-centre study to maximize the number of Makler chambers used. Methods: A total of 15 laboratories participated with 31 Makler chambers. A suspension of latex beads was prepared to a concentration of 20 millions per milliliter, and 0.5 mL aliquots distributed to each participating laboratory. They measured the concentration on their Makler chamber(s) used for routine semen analysis by adding 3, 4, 5, 7 and 10 μL volumes of bead suspension to the chamber. Results: There was no difference in within-chamber analysis of the bead concentration according to the volume of bead suspension applied within the range of 3–10 μL (F4,14=2.634, P=0.056). However, the between-chamber effects were significantly different (F30,124=4.937, P=0.000), and 24/31 (77.5%) chambers tested had an average bias\u3e10% compared to the target bead concentration. Conclusions: A volume of 3–10 μL added to Makler counting chambers does not influence the concentration measured of latex beads, but the between-chamber variability and positive bias seen would suggest that other sources of error are present which are yet to be identified

Obese father's metabolic state, adiposity, and reproductive capacity indicate son's reproductive health

ObjectiveTo determine whether dietary and exercise regimes in obese males can provide a novel intervention window for improving the reproductive health of the next generation.DesignExperimental animal study.SettingUniversity research facilities.Animal(s)C57BL6 male and female mice.Intervention(s)Mice were fed a control diet (6% fat) or high-fat diet (21% fat) for 9 weeks. After the initial feeding, high-fat-diet males were allocated to diet and/or exercise interventions for a further 9 weeks. After intervention males were mated with females fed standard chow (4% fat) before and during pregnancy.Main outcome measure(s)F1 sperm motility, count, morphology, capacitation, mitochondrial function, and sperm binding and weight of reproductive organs.Result(s)Our primary finding was that diet intervention alone in founders improved offspring sperm motility and mitochondrial markers of sperm health (decreased reactive oxygen species and mitochondrial membrane potential), ultimately improving sperm binding. Sperm binding and capacitation was also improved in F1 males born to a combined diet and exercise intervention in founders. Founder sperm parameters and metabolic measures as a response to diet and/or exercise (i.e., lipid/glucose homeostasis, sperm count and morphology) correlated with offspring's sperm function, independent of founder treatment. This implicates paternal metabolic and reproductive status in predicting male offspring's reproductive function.Conclusion(s)This is the first study to show that improvements to both metabolic (lipids, glucose and insulin sensitivity) and reproductive function (sperm motility and morphology) in obese fathers via diet and exercise interventions can improve subsequent reproductive health in offspring.Nicole O. McPherson, Tod Fullston, Hassan W. Bakos, Brian P. Setchell and Michelle Lan

Improving metabolic health in obese male mice via diet and exercise restores embryo development and fetal growth

Paternal obesity is now clearly associated with or causal of impaired embryo and fetal development and reduced pregnancy rates in humans and rodents. This appears to be a result of reduced blastocyst potential. Whether these adverse embryo and fetal outcomes can be ameliorated by interventions to reduce paternal obesity has not been established. Here, male mice fed a high fat diet (HFD) to induce obesity were used, to determine if early embryo and fetal development is improved by interventions of diet (CD) and/or exercise to reduce adiposity and improve metabolism. Exercise and to a lesser extent CD in obese males improved embryo development rates, with increased cell to cell contacts in the compacting embryo measured by E-cadherin in exercise interventions and subsequently, increased blastocyst trophectoderm (TE), inner cell mass (ICM) and epiblast cell numbers. Implantation rates and fetal development from resulting blastocysts were also improved by exercise in obese males. Additionally, all interventions to obese males increased fetal weight, with CD alone and exercise alone, also increasing fetal crown-rump length. Measures of embryo and fetal development correlated with paternal measures of glycaemia, insulin action and serum lipids regardless of paternal adiposity or intervention, suggesting a link between paternal metabolic health and subsequent embryo and fetal development. This is the first study to show that improvements to metabolic health of obese males through diet and exercise can improve embryo and fetal development, suggesting such interventions are likely to improve offspring health.Nicole O. McPherson, Hassan W. Bakos, Julie A. Owens, Brian P. Setchell, Michelle Lan

Combination of searches for heavy spin-1 resonances using 139 fb−1 of proton-proton collision data at s = 13 TeV with the ATLAS detector

A combination of searches for new heavy spin-1 resonances decaying into different pairings of W, Z, or Higgs bosons, as well as directly into leptons or quarks, is presented. The data sample used corresponds to 139 fb−1 of proton-proton collisions at = 13 TeV collected during 2015–2018 with the ATLAS detector at the CERN Large Hadron Collider. Analyses selecting quark pairs (qq, bb, , and tb) or third-generation leptons (τν and ττ) are included in this kind of combination for the first time. A simplified model predicting a spin-1 heavy vector-boson triplet is used. Cross-section limits are set at the 95% confidence level and are compared with predictions for the benchmark model. These limits are also expressed in terms of constraints on couplings of the heavy vector-boson triplet to quarks, leptons, and the Higgs boson. The complementarity of the various analyses increases the sensitivity to new physics, and the resulting constraints are stronger than those from any individual analysis considered. The data exclude a heavy vector-boson triplet with mass below 5.8 TeV in a weakly coupled scenario, below 4.4 TeV in a strongly coupled scenario, and up to 1.5 TeV in the case of production via vector-boson fusion

Combination of searches for heavy spin-1 resonances using 139 fb−1 of proton-proton collision data at √s = 13 TeV with the ATLAS detector

A combination of searches for new heavy spin-1 resonances decaying into different pairings of W, Z, or Higgs bosons, as well as directly into leptons or quarks, is presented. The data sample used corresponds to 139 fb−1 of proton-proton collisions at √s = 13 TeV collected during 2015–2018 with the ATLAS detector at the CERN Large Hadron Collider. Analyses selecting quark pairs (qq, bb, tt¯, and tb) or third-generation leptons (τν and ττ) are included in this kind of combination for the first time. A simplified model predicting a spin-1 heavy vector-boson triplet is used. Cross-section limits are set at the 95% confidence level and are compared with predictions for the benchmark model. These limits are also expressed in terms of constraints on couplings of the heavy vector-boson triplet to quarks, leptons, and the Higgs boson. The complementarity of the various analyses increases the sensitivity to new physics, and the resulting constraints are stronger than those from any individual analysis considered. The data exclude a heavy vector-boson triplet with mass below 5.8 TeV in a weakly coupled scenario, below 4.4 TeV in a strongly coupled scenario, and up to 1.5 TeV in the case of production via vector-boson fusion

Calibration of a soft secondary vertex tagger using proton-proton collisions at √s = 13 TeV with the ATLAS detector

Several processes studied by the ATLAS experiment at the Large Hadron Collider produce low-momentum b-flavored hadrons in the final state. This paper describes the calibration of a dedicated tagging algorithm that identifies b-flavored hadrons outside of hadronic jets by reconstructing the soft secondary vertices originating from their decays. The calibration is based on a proton-proton collision dataset at a center-of-mass energy of 13 TeV corresponding to an integrated luminosity of 140  fb−1. Scale factors used to correct the algorithm’s performance in simulated events are extracted for the b-tagging efficiency and the mistag rate of the algorithm using a data sample enriched in tt¯ events. Several orthogonal measurement regions are defined, binned as a function of the multiplicities of soft secondary vertices and jets containing a b-flavored hadron in the event. The mistag rate scale factors are estimated separately for events with low and high average numbers of interactions per bunch crossing. The results, which are derived from events with low missing transverse momentum, are successfully validated in a phase space characterized by high missing transverse momentum and therefore are applicable to new physics searches carried out in either phase space regime

Search for new phenomena with top-quark pairs and large missing transverse momentum using 140 fb−1 of pp collision data at √s = 13 TeV with the ATLAS detector

A search is conducted for new phenomena in events with a top quark pair and large missing transverse momentum, where the top quark pair is reconstructed in final states with one isolated electron or muon and multiple jets. The search is performed using the Large Hadron Collider proton-proton collision data sample at a centre-of-mass energy of √s = 13 TeV recorded by the ATLAS detector that corresponds to an integrated luminosity of 140 fb−1. An analysis based on neural network classifiers is optimised to search for directly produced pairs of supersymmetric partners of the top quark (stop), and to search for spin-0 mediators, produced in association with a pair of top quarks, that decay into dark-matter particles. In the stop search, the analysis is designed to target models in which the mass difference between the stop and the neutralino from the stop decay is close to the top quark mass. This new search is combined with previously published searches in final states with different lepton multiplicities. No significant excess above the Standard Model background is observed, and limits at 95% confidence level are set. Models with neutralinos with masses up to 570 GeV are excluded, while for small neutralino masses models are excluded for stop masses up to 1230 GeV. Scalar (pseudoscalar) dark matter mediator masses as large as 350 (370) GeV are excluded when the coupling strengths of the mediator to Standard Model and dark-matter particles are both set to one. At lower mediator masses, models with production cross-sections as small as 0.15 (0.16) times the nominal predictions are excluded. Results of this search are also used to set constraints on effective four-fermion contact interactions between top quarks and neutrinos