Effect of Different Growth Conditions on Certain Biochemical Parameters of Different Cyanobacterial Strains

Aims: Variation in the traditional growth medium conditions to enhance the production of lipids, carbohydrates, protein and the free amino acids content of three cyanobacterial species. Methodology and Results: Three species of cyanobacteria (Anabaena laxa, Anabaena fertilissima and Nostoc muscorum) were collected from the culture collection of Soils, Water and Environment Research Institute, Agriculture Research Center, Giza, Egypt, to investigate their biochemical composition under different growth conditions, using BG110 (nitrogen free) as growth medium. These conditions were represented by control medium, static glucose medium with (1%, w/v), aerated medium (aerated by bubbling technique depending on CO2 normally existed in air with a concentration of 0.03%), molasses medium (0.7%, v/v) and aerated medium enriched with glucose (1%, w/v). Lipid content, total carbohydrates, soluble proteins and free amino acids were determined at the previous conditions. Glucose at 0.7% (w/v) was the most favorable for lipid production in A. laxa, where it exhibited the highest lipid content (427 μg/g fresh wt.). Increasing molasses concentration up to 0.7% (v/v) produced an increase in lipid contents of the tested cyanobacterial strains. The highest lipid content of both N. muscorum (366.2 μg/g fresh wt.) and A. laxa (357.4 μg/g fresh wt.) were recorded at molasses concentrations of 0.1 and 0.7% (v/v), respectively. A. laxa expressed high significant values for both proteins (31.6 μg/mL) and free amino acids (40.5 mg/g dry wt.) after 6 days of incubation period under aerated enriched glucose condition (1%, w/v). Also, at the same growth conditions, A. fertilissima exhibited high significant values for carbohydrates at 4th day (876.8 mg/g dry wt.). Conclusion, significance and impact of study: Aerated enriched glucose medium (1%, w/v) was the best growth medium condition used in the present study

Perceptions of Assistant Principals’ and Principals’ of Bahrain Government Schools about the Impact of the Bahrain Teachers College Educational Leadership Program on Their Performance

This article examines the perceptions of school assistant principals and principals who completed the Bahrain Teachers College higher diploma of education leadership program about its impact on their performance. The study sample consisted of 141 program graduates from 9- cohorts. A multilevel concept in measuring the impact of the educational leadership program on the graduates’ performance was employed. The framework consisted of 4 levels: self-learning, changing others, embedding changes in school practices and sustainability of change and scaling up the school performance. The study questionnaire was designed on the basis of this framework. Results show that the Educational Leadership program positively affected its graduates’ performance in the 4 levels. The majority of the program graduates agreed that the program positively affected their personal qualities, leadership styles and practices to support school development, school staff, students’ performance and school ranking. The majority of the program graduates also agreed that the program positively affected their skills in dealing with curriculum innovations, professional development, research, strategic planning, staff appraisal, communication with community, using ICT, improving students’ learning and applying educational ethics.     Keywords: Education Leadership, School Principals’ Performance, Leadership Styles, School Practices, Leadership Skill

Light absorption enhancement in thin film hydrgenated amorphus Si solar cells

In this paper, light absorption enhancement in thin film solar cell (SC) is reported and analyzed. The suggested design is based on a nanostructured pattern that increases the diffuse scattered component of radiation and hence the absorption through the active layer. An ion beam sputtering (lBS) approach is used to texture large areas of the glass substrate with high aspect-ratio ripples in order to increase light scattering. Then, thin film SC supported on the textured glass is simulated and analyzed using 3D finite difference time domain (FDTD) method. The suggested SC can offer an ultimate efficiency of 19.26% with short circuit current of 15.76 mA/cm2 with an enhancement of 31.435% over the SC without texturing surface

Electrical performance of efficient quad-crescent-shaped Si nanowire solar cell

The electrical characteristics of quad-crescent-shaped silicon nanowire (NW) solar cells (SCs) are numerically analyzed and as a result their performance optimized. The structure discussed consists of four crescents, forming a cavity that permits multiple light scattering with high trapping between the NWs. Additionally, new modes strongly coupled to the incident light are generated along the NWs. As a result, the optical absorption has been increased over a large portion of light wavelengths and hence the power conversion efficiency (PCE) has been improved. The electron–hole (e–h) generation rate in the design reported has been calculated using the 3D finite difference time domain method. Further, the electrical performance of the SC reported has been investigated through the finite element method, using the Lumerical charge software package. In this investigation, the axial and core–shell junctions were analyzed looking at the reported crescent and, as well, conventional NW designs. Additionally, the doping concentration and NW-junction position were studied in this design proposed, as well as the carrier-recombination-and-lifetime effects. This study has revealed that the high back surface field layer used improves the conversion efficiency by ∼ 80%. Moreover, conserving the NW radial shell as a low thickness layer can efficiently reduce the NW sidewall recombination effect. The PCE and short circuit current were determined to be equal to 18.5% and 33.8 mA/cm$^{2}$ for the axial junction proposed. However, the core–shell junction shows figures of 19% and 34.9 mA/cm$^{2}$. The suggested crescent design offers an enhancement of 23% compared to the conventional NW, for both junctions. For a practical surface recombination velocity of 10$^{2}$ cm/s, the PCE of the proposed design, in the axial junction, has been reduced to 16.6%, with a reduction of 11%. However, the core–shell junction achieves PCE of 18.7%, with a slight reduction of 1.6%. Therefore, the optoelectronic performance of the core–shell junction was marginally affected by the NW surface recombination, compared to the axial junction

Optical and electrical characterization of solar cell with nanowires mimicking antireflection coating layers considering axial and radial PN junctions

It has been well documented that the usage of a textured cover layer reduces reflection from the air‐solar cell interface, which ultimately enhances the power conversion efficiency (PCE) of a solar cell. The most commonly used patterns, such as pyramids, micropillars, nanowires (NW), and nanoholes have been widely studied and optimized. Besides using such NWs to enhance light absorption, this work also additionally considers the concept of mimicking the antireflection coating of single or multiple layers in minimizing the reflectance and thus enhancing the total absorptance further. It is shown here that at least one order of magnitude shorter multilayer NW pattern of 268 nm total height can outperform a standard NW of 4270 nm height, which needs less material and can also be fabricated at a reduced cost. Furthermore, the proposed design with reduced height has a significantly lower surface‐to‐volume ratio, which also reduces surface recombination loss than the other textured surface patterns. The results presented in this work have been comprehensively analyzed by initially optimizing optical absorption and then completing the electrical simulations. The optimized design in conjunction with a back reflector offers an efficiency as high as 16.434%

Characteristics of silicon nanowire solar cells with a crescent nanohole

In recent years, newly emerging photovoltaic (PV) devices based on silicon nanowire solar cells (SiNW-SCs) have attracted considerable research attention. This is due to their efficient light-trapping capability and large carrier transportation and collection with compact size. However, there is a strong desire to find effective strategies to provide high and wideband optical absorption. In this paper, a modified circular nanowire (NW) with a nanocrescent hole is newly introduced and analyzed for solar cell applications. The crescent hole can strongly improve the light absorption through the NW due to the excitation of numbers of modes that can be coupled with the incident light. The material index, volume, and position of the nanohole are studied to significantly increase the optical absorption efficiency and hence the power conversion efficiency (PCE). The absorption performance can be further preserved by using a silicon substrate due to the coupling between the supported modes by the NW, and that of the substrate. The optical and electrical characteristics of the suggested design are investigated using finite difference time domain and finite element methods via Lumerical software packages. The reported asymmetric design offers higher optical and electrical efficiencies compared to the conventional NW counterpart. The proposed NW offers a short circuit current density (Jsc) of 33.85 (34.35) mA/cm2 and power conversion efficiency (PCE) of 16.78 (17.05) % with an enhancement of 16.3 (16.8) % and 17.3 (18.4) % for transverse magnetic (TM) and transverse electric (TE) polarizations, respectively, compared to the conventional cylindrical counterpart

Electrical performance of efficient quad-crescent-shaped Si nanowire solar cell

The electrical characteristics of quad-crescent-shaped silicon nanowire (NW) solar cells (SCs) are numerically analyzed and as a result their performance optimized. The structure discussed consists of four crescents, forming a cavity that permits multiple light scattering with high trapping between the NWs. Additionally, new modes strongly coupled to the incident light are generated along the NWs. As a result, the optical absorption has been increased over a large portion of light wavelengths and hence the power conversion efficiency (PCE) has been improved. The electron–hole (e–h) generation rate in the design reported has been calculated using the 3D finite difference time domain method. Further, the electrical performance of the SC reported has been investigated through the finite element method, using the Lumerical charge software package. In this investigation, the axial and core–shell junctions were analyzed looking at the reported crescent and, as well, conventional NW designs. Additionally, the doping concentration and NW-junction position were studied in this design proposed, as well as the carrier-recombination-and-lifetime effects. This study has revealed that the high back surface field layer used improves the conversion efficiency by ∼ 80%. Moreover, conserving the NW radial shell as a low thickness layer can efficiently reduce the NW sidewall recombination effect. The PCE and short circuit current were determined to be equal to 18.5% and 33.8 mA/ cm 2 for the axial junction proposed. However, the core–shell junction shows figures of 19% and 34.9 mA/ cm 2. The suggested crescent design offers an enhancement of 23% compared to the conventional NW, for both junctions. For a practical surface recombination velocity of 10 2 cm/s, the PCE of the proposed design, in the axial junction, has been reduced to 16.6%, with a reduction of 11%. However, the core–shell junction achieves PCE of 18.7%, with a slight reduction of 1.6%. Therefore, the optoelectronic performance of the core–shell junction was marginally affected by the NW surface recombination, compared to the axial junction

Can Bcl-XL expression predict the radio sensitivity of Bilharzial-related squamous bladder carcinoma? a prospective comparative study

<p>Abstract</p> <p>Background</p> <p>Local pelvic recurrence after radical cystectomy for muscle invasive bilharzial related squamous cell carcinoma accounts for 75% of treatment failures even in organ confined tumors. Despite the proven value of lymphadenectomy, up to 60% of patients undergoing cystectomy do not have it. These factors are in favor of adjuvant radiotherapy reevaluation. objectives: to evaluate the effect of adjuvant radiotherapy on disease free survival in muscle invasive bilharzial related squamous cell carcinoma of the urinary bladder and to test the predictability of radio-sensitivity using the anti apoptotic protein Bcl-XL.</p> <p>Methods</p> <p>The study prospectively included 71 patients, (47 males, 24 females) with muscle invasive bilharzial related squamous cell carcinoma of the bladder (Stage pT2a-T3N0-N3M0) who underwent radical cystectomy in Assiut university hospitals between January 2005 and December 2006. Thirty eight patients received adjuvant radiotherapy to the pelvis in the dose of 50Gy/25 fractions/5 weeks (Group 1), while 33 patients did not receive adjuvant radiotherapy (group 2). Immunohistochemical characterization for bcl-xL expression was done. Follow up was done every 3 months for 12 to 36 months with a mean of 16 ± 10 months. All data were analyzed using SPSS version 16. Three years cumulative disease free survival was calculated and adjusted to Bcl-XL expression and side effects of the treatment were recorded.</p> <p>Results</p> <p>The disease free cumulative survival was 48% for group 1 and 29% for group 2 (log rank p value 0.03). The multivariate predictors of tumor recurrence were the positive Bcl-XL expression (odd ratio 41.1, 95% CI 8.4 - 102.3, p < 0.0001) and radiotherapy (odd ratio 0.19, 95% CI 0.05 - 0.78, p < 0.02). With Cox regression, the only independent multivariate predictor of radio-sensitivity was the Bcl-XL expression with odd ratio 4.6 and a p value < 0.0001. All patients tolerated the treatment with no life threatening or late complications during the period of follow up.</p> <p>Conclusions</p> <p>Adjuvant radiotherapy for muscle invasive bilharzial related squamous cell carcinoma of the urinary bladder has potential effectiveness and minor side effects. Moreover, Bcl-XL expression is a valuable tool for predicting those who might not respond to this adjuvant treatment.</p

Synthesis of an ordered mesoporous carbon with graphitic characteristics and its application for dye adsorption

An ordered mesoporous carbon (OMC) was prepared by a chemical vapor deposition technique using liquid petroleum gas (LPG) as the carbon source. During synthesis, LPG was effectively adsorbed in the ordered mesopores of SBA-15 silica and converted to a graphitic carbon at 800 °C. X-ray diffraction and nitrogen adsorption/desorption data and high-resolution transmission electron microscopy (HRTEM) of the OMC confirmed its ordered mesoporous structure. The OMC was utilized as an adsorbent in the removal of dyes from aqueous solution. A commercial powder activated carbon (AC) was also investigated to obtain comparative data. The efficiency of the OMC for dye adsorption was tested using acidic dye acid orange 8 (AO8) and basic dyes methylene blue (MB) and rhodamine B (RB). The results show that adsorption was affected by the molecular size of the dye, the textural properties of carbon adsorbent and surface-dye interactions. The adsorption capacities of the OMC for acid orange 8 (AO8), methylene blue (MB) and rhodamine B (RB) were determined to be 222, 833, and 233 mg/g, respectively. The adsorption capacities of the AC for AO8, MB, and RB were determined to be 141, 313, and 185 mg/ g, respectively. The OMC demonstrated to be an excellent adsorbent for the removal of MB from wastewater.Web of Scienc

Theory and applications of atomic and ionic polarizabilities

Atomic polarization phenomena impinge upon a number of areas and processes in physics. The dielectric constant and refractive index of any gas are examples of macroscopic properties that are largely determined by the dipole polarizability. When it comes to microscopic phenomena, the existence of alkaline-earth anions and the recently discovered ability of positrons to bind to many atoms are predominantly due to the polarization interaction. An imperfect knowledge of atomic polarizabilities is presently looming as the largest source of uncertainty in the new generation of optical frequency standards. Accurate polarizabilities for the group I and II atoms and ions of the periodic table have recently become available by a variety of techniques. These include refined many-body perturbation theory and coupled-cluster calculations sometimes combined with precise experimental data for selected transitions, microwave spectroscopy of Rydberg atoms and ions, refractive index measurements in microwave cavities, ab initio calculations of atomic structures using explicitly correlated wave functions, interferometry with atom beams, and velocity changes of laser cooled atoms induced by an electric field. This review examines existing theoretical methods of determining atomic and ionic polarizabilities, and discusses their relevance to various applications with particular emphasis on cold-atom physics and the metrology of atomic frequency standards.Comment: Review paper, 44 page