Atom-Specific Probing of Electron Dynamics in an Atomic Adsorbate by Time-Resolved X-Ray Spectroscopy

The electronic excitation occurring on adsorbates at ultrafast timescales from optical lasers that initiate surface chemical reactions is still an open question. Here, we report the ultrafast temporal evolution of x-ray absorption spectroscopy (XAS) and x-ray emission spectroscopy (XES) of a simple well-known adsorbate prototype system, namely carbon (C) atoms adsorbed on a nickel [Ni(100)] surface, following intense laser optical pumping at 400 nm. We observe ultrafast (∼100  fs) changes in both XAS and XES showing clear signatures of the formation of a hot electron-hole pair distribution on the adsorbate. This is followed by slower changes on a few picoseconds timescale, shown to be consistent with thermalization of the complete C/Ni system. Density functional theory spectrum simulations support this interpretation

Atom-Specific Probing of Electron Dynamics in an Atomic Adsorbate by Time-Resolved X-ray Spectroscopy

The electronic excitation occurring on adsorbates at ultrafast time scales from optical lasers that initiate surface chemical reactions is still an open question. Here, we report the ultrafast temporal evolution of X-ray absorption spectroscopy (XAS) and X-ray emission spectroscopy (XES) of a simple well known adsorbate prototype system, namely carbon (C) atoms adsorbed on a nickel (Ni(100)) surface, following intense laser optical pumping at 400 nm. We observe ultrafast (~100 fs) changes in both XAS and XES showing clear signatures of the formation of a hot electron-hole pair distribution on the adsorbate. This is followed by slower changes on a few ps time scale, shown to be consistent with thermalization of the complete C/Ni system. Density functional theory spectrum simulations support this interpretation.Comment: 33 pages, 12 figures. Submitted to Physical Review Letter

Computational Studies of Chemical Interactions: Molecules, Surfaces and Copper Corrosion

The chemical bond – a corner stone in science and a prerequisite for life – is the focus of this thesis. Fundamental and applied aspects of chemical bonding are covered including the development of new computational methods for the characterization and rationalization of chemical interactions. The thesis also covers the study of corrosion of copper-based materials. The latter is motivated by the proposed use of copper as encapsulating material for spent nuclear fuel in Sweden. In close collaboration with experimental groups, state-of-the-art computational methods were employed for the study of chemistry at the atomic scale. First, oxidation of nanoparticulate copper was examined in anoxic aqueous media in order to better understand the copper-water thermodynamics in relation to the corrosion of copper material under oxygen free conditions. With a similar ambition, the water-cuprite interface was investigated with regards to its chemical composition and reactivity. This was compared to the behavior of methanol and hydrogen sulfide at the cuprite surface. An overall ambition during the development of computational methods for the analysis of chemical bonding was to bridge the gap between molecular and materials chemistry. Theory and results are thus presented and applied in both a molecular and a solid-state framework. A new property, the local electron attachment energy, for the characterization of a compound’s local electrophilicity was introduced. Together with the surface electrostatic potential, the new property predicts and rationalizes regioselectivity and trends of molecular reactions, and interactions on metal and oxide nanoparticles and extended surfaces. Detailed atomistic understanding of chemical processes is a prerequisite for the efficient development of chemistry. We therefore envisage that the results of this thesis will find widespread use in areas such as heterogeneous catalysis, drug discovery, and nanotechnology.Den kemiska bindningen – en hörnsten inom naturvetenskapen och oumbärlig för allt liv – är det centrala temat i den här avhandlingen. Både grundläggande och tillämpade aspekter behandlas. Detta inkluderar utvecklingen av nya beräkningsmetoder för förståelse och karaktärisering av kemiska interaktioner. Dessutom behandlas korrosion av kopparbaserade material. Det sistnämnda är motiverat av förslaget att använda koppar som inkapslingsmaterial för hanteringen av kärnavfall i Sverige. Kvantkemiska beräkningsmetoder enligt state-of-the-art har använts för att studera kemi på atomnivå, detta i nära sammabete med experimentella grupper. Initialt studerades oxidation av kopparnanopartiklar under syrgasfria och vattenrika förhållanden. Detta för att bättre kartlägga koppar-vattensystemets termodynamik. Av samma orsak detaljstuderades även gränsskiktet mellan vatten och kuprit med fokus på dess kemiska sammansättning och reaktivitet. Resultaten har jämförts med metanols och vätesulfids kemiska beteende på ytan av kuprit. En övergripande målsättningen under arbetet med att utveckla nya beräkningsbaserade analysverktyg för kemiska bindningar har varit att överbrygga gapet mellan molekylär- och materialkemi. Därför presenteras teoretiska aspekter samt tillämpningar från både ett molekylärt samt ett fast-fas perspektiv. En ny deskriptor för karaktärisering av föreningars lokala elektrofilicitet har introducerats – den lokala elektronadditionsenergin. Tillsammans med den elektrostatiska potentialen uppvisar den nya deskriptorn förmåga att förutsäga samt förklara regioselektivitet och trender för molekylära reaktioner, och för interaktioner på metal- och oxidbaserade nanopartiklar och ytor. En detaljerad förståelse av kemiska processer på atomnivå är en nödvändighet för ett effektivt utvecklande av kemivetenskapen. Vi förutspår därför att resultaten från den här avhandlingen kommer att få omfattande användning inom områden som heterogen katalys, läkemedelsdesign och nanoteknologi.QC 20170829</p

Computational Studies of Chemical Interactions: Molecules, Surfaces and Copper Corrosion

The chemical bond – a corner stone in science and a prerequisite for life – is the focus of this thesis. Fundamental and applied aspects of chemical bonding are covered including the development of new computational methods for the characterization and rationalization of chemical interactions. The thesis also covers the study of corrosion of copper-based materials. The latter is motivated by the proposed use of copper as encapsulating material for spent nuclear fuel in Sweden. In close collaboration with experimental groups, state-of-the-art computational methods were employed for the study of chemistry at the atomic scale. First, oxidation of nanoparticulate copper was examined in anoxic aqueous media in order to better understand the copper-water thermodynamics in relation to the corrosion of copper material under oxygen free conditions. With a similar ambition, the water-cuprite interface was investigated with regards to its chemical composition and reactivity. This was compared to the behavior of methanol and hydrogen sulfide at the cuprite surface. An overall ambition during the development of computational methods for the analysis of chemical bonding was to bridge the gap between molecular and materials chemistry. Theory and results are thus presented and applied in both a molecular and a solid-state framework. A new property, the local electron attachment energy, for the characterization of a compound’s local electrophilicity was introduced. Together with the surface electrostatic potential, the new property predicts and rationalizes regioselectivity and trends of molecular reactions, and interactions on metal and oxide nanoparticles and extended surfaces. Detailed atomistic understanding of chemical processes is a prerequisite for the efficient development of chemistry. We therefore envisage that the results of this thesis will find widespread use in areas such as heterogeneous catalysis, drug discovery, and nanotechnology.Den kemiska bindningen – en hörnsten inom naturvetenskapen och oumbärlig för allt liv – är det centrala temat i den här avhandlingen. Både grundläggande och tillämpade aspekter behandlas. Detta inkluderar utvecklingen av nya beräkningsmetoder för förståelse och karaktärisering av kemiska interaktioner. Dessutom behandlas korrosion av kopparbaserade material. Det sistnämnda är motiverat av förslaget att använda koppar som inkapslingsmaterial för hanteringen av kärnavfall i Sverige. Kvantkemiska beräkningsmetoder enligt state-of-the-art har använts för att studera kemi på atomnivå, detta i nära sammabete med experimentella grupper. Initialt studerades oxidation av kopparnanopartiklar under syrgasfria och vattenrika förhållanden. Detta för att bättre kartlägga koppar-vattensystemets termodynamik. Av samma orsak detaljstuderades även gränsskiktet mellan vatten och kuprit med fokus på dess kemiska sammansättning och reaktivitet. Resultaten har jämförts med metanols och vätesulfids kemiska beteende på ytan av kuprit. En övergripande målsättningen under arbetet med att utveckla nya beräkningsbaserade analysverktyg för kemiska bindningar har varit att överbrygga gapet mellan molekylär- och materialkemi. Därför presenteras teoretiska aspekter samt tillämpningar från både ett molekylärt samt ett fast-fas perspektiv. En ny deskriptor för karaktärisering av föreningars lokala elektrofilicitet har introducerats – den lokala elektronadditionsenergin. Tillsammans med den elektrostatiska potentialen uppvisar den nya deskriptorn förmåga att förutsäga samt förklara regioselektivitet och trender för molekylära reaktioner, och för interaktioner på metal- och oxidbaserade nanopartiklar och ytor. En detaljerad förståelse av kemiska processer på atomnivå är en nödvändighet för ett effektivt utvecklande av kemivetenskapen. Vi förutspår därför att resultaten från den här avhandlingen kommer att få omfattande användning inom områden som heterogen katalys, läkemedelsdesign och nanoteknologi.QC 20170829</p

Local Electron Attachment Energy and Its Use for Predicting Nucleophilic Reactions and Halogen Bonding

A new local property, the local electron attachment energy [E(r)], is introduced and is demonstrated to, be a useful guide to predict intermolecular interactions and chemical reactivity. The E(r) is analogous to the average local ionization energy but indicates susceptibility toward interactions with nucleophiles rather than electrophiles. The functional form E(r) is motivated based on Janak's theorem and the piecewise linear energy dependence of electron addition to atomic and molecular systems. Within the generalized Kohn-Sham method (GKS-DFT), only the virtual orbitals with negative eigenvalues contribute to E(r). In the, present study, E(r) has been computed from orbitals obtained from GKS-DFT computations with a hybrid exchange correlation functional. It is shown that E(r) computed on a molecular isodengty surface, E-S(r), reflects the regioselectivity and relative reactivity for nucleophilic aromatic substitution, nucleophilic addition to activated double bonds, and formation of halogen bonds. Good to excellent correlations between experimental or theoretical measures of interaction strengths and minima in E-S(r) (E-S,E-min) are demonstrated.QC 20170202</p

Extending the σ‑Hole Concept to Metals: An Electrostatic Interpretation of the Effects of Nanostructure in Gold and Platinum Catalysis

Crystalline surfaces of gold are chemically inert, whereas nanoparticles of gold are excellent catalysts for many reactions. The catalytic properties of nanostructured gold have been connected to increased binding affinities of reactant molecules for low-coordinated Au atoms. Here we show that the high reactivity at these sites is a consequence of the formation of σ-holes, i.e., maxima in the surface electrostatic potential (<i>V</i>_S,max), due to the overlap of mainly the valence s-orbitals when forming the bonding σ-orbitals. The σ-holes are binding sites for Lewis bases, and binding energies correlate with the magnitudes of the <i>V</i>_S,max. For symmetrical Au clusters, of varying sizes, the most positive <i>V</i>_S,max values are found at the corners, edges, and surfaces (facets), decreasing in that order. This is in agreement with the experimentally and theoretically observed dependence of catalytic activity on local structure. The density of σ-holes can explain the increasing catalytic activity with decreasing particle size for other transition metal catalysts also, such as platinum

σ-Holes on Transition Metal Nanoclusters and Their Influence on the Local Lewis Acidity

Understanding the molecular interaction behavior of transition metal nanoclusters lies at the heart of their efficient use in, e.g., heterogeneous catalysis, medical therapy and solar energy harvesting. For this purpose, we have evaluated the applicability of the surface electrostatic potential [VS(r)] and the local surface electron attachment energy [ES(r)] properties for characterizing the local Lewis acidity of a series of low-energy TM13 transition metal nanoclusters (TM = Au, Cu, Ru, Rh, Pd, Ir, Pt, Co), including also Pt7Cu6. The clusters have been studied using hybrid Kohn–Sham density functional theory (DFT) calculations. The VS(r) and ES(r), evaluated at 0.001 a.u. isodensity contours, are used to analyze the interactions with H2O. We find that the maxima of VS(r), σ-holes, are either localized or diffuse. This is rationalized in terms of the nanocluster geometry and occupation of the clusters’s, p and d valence orbitals. Our findings motivate a new scheme for characterizing σ-holes as σs (diffuse), σp (localized) or σd (localized) depending on their electronic origin. The positions of the maxima in VS(r) (and minima in ES(r)) are found to coincide with O-down adsorption sites of H2O, whereas minima in VS(r) leads to H-down adsorption. Linear relationships between VS,max (and ES,min) and H2O interaction energies are further discussed.20170816</p

Theoretical Investigation into Rate-Determining Factors in Electrophilic Aromatic Halogenation

The halogenation of monosubstituted benzenes in aqueous solvent was studied using density functional theory at the PCM-M06-2<i>X</i>/6-311G­(d,p) level. The reaction with Cl₂ begins with the formation of C atom coordinated π-complex and is followed by the formation of the σ-complex, which is rate-determining. The final part proceeds via the abstraction of the proton by a water molecule or a weak base. We evaluated the use of the σ-complex as a model for the rate-determining transition state (TS) and found that this model is more accurate the later the TS comes along the reaction coordinate. This explains the higher accuracy of the model for halogenations (late TS) compared to nitrations (early TS); that is, the more deactivated the substrate the later the TS. The halogenation with Br₂ proceeds with a similar mechanism as the corresponding chlorination, but the bromination has a very late rate-determining TS that is similar to the σ-complex in energy. The iodination with ICl follows a different mechanism than chlorination and bromination. After the formation of the π-complex, the reaction proceeds in a concerted manner without a σ-complex. This reaction has a large primary hydrogen kinetic isotope effect in agreement with experimental observations

High-Density Isolated Fe 1 O 3 Sites on a Single-Crystal Cu 2 O(100) Surface

International audienc