Analysis of Topaz II and Space-R Space Nuclear Power Plants Using a Modified Thermionic Model

Models based on the TDS thermionic diode model were developed for TOPAZ II and SPACER nuclear power systems. Several parameter studies were conducted with the TOPAZ II model. These determined system performance and efficiency while varying the following: (1) Coolant flow inlet temperatures. (2) Rate of coolant temperature change. (3) Power profile of the core. (4) Cesium reservoir temperature. Analysis of results indicate the model accurately represented the TOPAZ II system, underestimating published data by 10%. Coolant flow studies indicate that raising coolant temperatures up to 100 K higher increases system power by up to 5%. Additional increases in temperature result in gradual performance degradation. Varying the axial power profile of the core from the actual peaked profile to a flat profile results in a negligible 0.3% change in system performance. The peaked profile used in TOPAZ H produces the highest system efficiency of all the profiles modeled. The cesium pressure study indicates the system is operating above optimum cesium pressure and system performance is strongly dependent on cesium pressure. Increasing cesium reservoir temperature above design temperature by 30 K decreases system efficiency by 30%

O mouse, where art thou? The Mouse Position Surveillance System (MoPSS)—an RFID-based tracking system

Existing methods for analysis of home cage-based preference tests are either time-consuming, not suitable for group management, expensive, and/or based on proprietary equipment that is not freely available. To correct this, we developed an automated system for group-housed mice based on radio frequency identification: the Mouse Position Surveillance System (MoPSS). The system uses an Arduino microcontroller with compatible components; it is affordable and easy to rebuild for every laboratory because it uses free and open-source software and open-source hardware with the RFID readers as the only proprietary component. The MoPSS was validated using female C57BL/6J mice and manual video comparison. It proved to be accurate even for fast-moving mice (up to 100% accuracy after logical reconstruction), and is already implemented in several studies in our laboratory. Here, we provide the complete construction description as well as the validation data and the results of an example experiment. This tracking system will allow group-based preference testing with individually identified mice to be carried out in a convenient manner. This facilitation of preference tests creates the foundation for better housing conditions from the animals’ perspective

A study of collider signatures for two Higgs doublet models with a Pseudoscalar mediator to Dark Matter

Two Higgs doublet models with an additional pseudoscalar particle coupling to the Standard Model and to a new stable, neutral particle, provide an attractive and fairly minimal route to solving the problem of Dark Matter. They have been the subject of several searches at the LHC. We study the impact of existing LHC measurements on such models, first in the benchmark regions addressed by searches and then after relaxing some of their assumptions and broadening the parameter ranges considered. In each case we study how the new parameters change the potentially visible signatures at the LHC, and identify which of these signatures should already have had a significant impact on existing measurements. This allows us to set some first constraints on a number of so far unstudied scenarios.Comment: 20 pages, 9 figures; added EW constraints contours, extended explanation of WW model-dependency, extended motivation for pseudoscalar mediators, corrected typo

SEDIMENTOLOGY AND CITIZEN SCIENCE: ECOLOGICAL MONITORING IN CARPENTER CREEK, KINGSTON, WA.

Monitoring is a key component of any successful ecological restoration project. Being able to see how an ecosystem responds to restoration treatments is not only vital for planning out future restoration work, but also for more fully understanding how an ecosystem functions. The aim of this study was to examine the relationship between two culvert removals done in Carpenter Creek, a tidal creek feeding an estuarine wetland in North Kitsap, and the texture of the alluvial sediments bedded by the creek. To accomplish this task, we used the R programming language to analyze and visualize sediment texture data collected by Stillwaters Environmental Center, an environmental monitoring non-profit operating out of the local area. Our data visualizations suggest that the first culvert removal, done near the mouth of the creek in 2012, resulted in a change in overall texture and an increase in fine sediments, while in 2014 and 2016 sediment texture drifted back towards the base state seen in 2011. In 2018, when the second culvert, this time located upstream near the marsh, was removed, a greater change in texture and increase in fine sediment was observed. These results suggest that an increased level of stream connectivity has been achieved, thereby allowing a freer and more natural sediment transportation regime. This increased understanding of Carpenter Creek’s evolution was made possible through a long-term monitoring effort

Flipbook-ENA: Towards a dynamic Ecological Network Analysis under changing environmental conditions

Changes in abiotic parameters can affect ecosystem structure and function. Network models with subsequent Ecological Network Analysis (ENA) are often used for the quantification of ecosystem-wide properties with descriptive system indices. However, dynamic abiotic alterations of an ecosystem cannot be resolved with the “state of the art” ENA as the methodology of analyses is static in both space and time. In this study, we present a new, almost dynamic ENA “Flipbook-ENA” which allows for the trend analysis of system indices over a defined range of abiotic factors. Flipbook-ENA enables an approximation of the dynamic system response by discretizing the continuous influence of abiotic factors and by calculating the corresponding changes in the model for each discretization step. ENA indices are therefore obtained as a discrete function of the abiotic conditions. We applied this new concept to two aquatic food web models as case studies, using temperature as the influencing abiotic factor. Flipbook-ENA can be considered an enhancement of ENA flexibility, also facilitating the provision of a quantitative assessment basis for socially, economically and ecologically-balanced management of ecosystems in unstable environmental conditions under the pressure of climate change

Guppies Prefer to Follow Large (Robot) Leaders Irrespective of Own Size

Body size is often assumed to determine how successfully an individual can lead others with larger individuals being better leaders than smaller ones. But even if larger individuals are more readily followed, body size often correlates with specific behavioral patterns and it is thus unclear whether larger individuals are more often followed than smaller ones because of their size or because they behave in a certain way. To control for behavioral differences among differentially-sized leaders, we used biomimetic robotic fish (Robofish) of different sizes. Live guppies (Poecilia reticulata) are known to interact with Robofish in a similar way as with live conspecifics. Consequently, Robofish may serve as a conspecific-like leader that provides standardized behaviors irrespective of its size. We asked whether larger Robofish leaders are preferentially followed and whether the preferences of followers depend on own body size or risk-taking behavior (“boldness”). We found that live female guppies followed larger Robofish leaders in closer proximity than smaller ones and this pattern was independent of the followers’ own body size as well as risk-taking behavior. Our study shows a “bigger is better” pattern in leadership that is independent of behavioral differences among differentially-sized leaders, followers’ own size and risk-taking behavior.Peer Reviewe

Testing new-physics models with global comparisons to collider measurements: the Contur toolkit

Measurements at particle collider experiments, even if primarily aimed at understanding Standard Model processes, can have a high degree of model independence, and implicitly contain information about potential contributions from physics beyond the Standard Model. The Contur package allows users to benefit from the hundreds of measurements preserved in the Rivet library to test new models against the bank of LHC measurements to date. This method has proven to be very effective in several recent publications from the Contur team, but ultimately, for this approach to be successful, the authors believe that the Contur tool needs to be accessible to the wider high energy physics community. As such, this manual accompanies the first user-facing version: Contur v2. It describes the design choices that have been made, as well as detailing pitfalls and common issues to avoid. The authors hope that with the help of this documentation, external groups will be able to run their own Contur studies, for example when proposing a new model, or pitching a new search

Protection from cytomegalovirus after transplantation is correlated with immediate early 1–specific CD8 T cells

T cells are crucial for the control of cytomegalovirus (CMV) in infected individuals. Although CMV-specific T cells can be quantified by various methods, clear correlates of protection from CMV disease have not been defined. However, responses to the pp65 protein are believed to play an important role. Here, the proportions of interferon γ–producing T cells following ex vivo activation with pools of overlapping peptides representing the pp65 and immediate early (IE)-1 proteins were determined at multiple time points and related to the development of CMV disease in 27 heart and lung transplant recipients. Frequencies of IE-1–specific CD8 T cells above 0.2 and 0.4% at day 0 and 2 wk, respectively, or 0.4% at any time during the first months discriminated patients who did not develop CMV disease from patients at risk, 50–60% of whom developed CMV disease. No similar distinction between risk groups was possible based on pp65-specific CD8 or CD4 T cell responses. Remarkably, CMV disease developed exclusively in patients with a dominant pp65-specific CD8 T cell response. In conclusion, high frequencies of IE-1 but not pp65-specific CD8 T cells correlate with protection from CMV disease. These results have important implications for monitoring T cell responses, adoptive cell therapy, and vaccine design

Fused Deposition Modeling of ABS-Barium Titanate Composites: A Simple Route towards Tailored Dielectric Devices

A process for the development, characterization and correlation of composite materials for 3D printing is presented, alongside the processing of a polymer-ceramic functional composite using fused deposition modeling (FDM). The composite was developed using acrylonitrile butadiene styrene (ABS) as the matrix material filled with barium titanate (BT) micro-powder up to 35 vol % (74.2 wt %). The ABS-BT composites exhibited a shear thinning behavior with increasing ceramic content. The composite was 3D printed into structural and functional test samples using FDM by adapting and optimizing the print parameters. Structural characterization revealed increasingly brittle behavior at higher filler ratios, with the ultimate tensile strength falling from 25.5 MPa for pure ABS to 13.7 MPa for the ABS-35 vol % BT composite. Four-point flexural tests showed a similar decrease in flexural strength with increasing ceramic content. Functional characterization revealed an increase in the relative permittivity at 200 kHz from 3.08 for pure ABS to 11.5 for the composite with 35 vol % BT. These results were correlated with the Maxwell-Garnett and Jayasundere-Smith effective medium models. The process described in this work can be used for other 3D printing processes and provides a framework for the rapid prototyping of functional composites into functional parts with reliable properties. The ABS-BT composite shows promise as a functional dielectric material, with potential applications as capacitors and light-weight passive antennas

Reduced functional measure of cardiovascular reserve predicts admission to critical care unit following kidney transplantation

Background: There is currently no effective preoperative assessment for patients undergoing kidney transplantation that is able to identify those at high perioperative risk requiring admission to critical care unit (CCU). We sought to determine if functional measures of cardiovascular reserve, in particular the anaerobic threshold (VO2AT) could identify these patients. Methods: Adult patients were assessed within 4 weeks prior to kidney transplantation in a University hospital with a 37-bed CCU, between April 2010 and June 2012. Cardiopulmonary exercise testing (CPET), echocardiography and arterial applanation tonometry were performed. Results: There were 70 participants (age 41.7614.5 years, 60% male, 91.4% living donor kidney recipients, 23.4% were desensitized). 14 patients (20%) required escalation of care from the ward to CCU following transplantation. Reduced anaerobic threshold (VO2AT) was the most significant predictor, independently (OR = 0.43; 95% CI 0.27–0.68; p,0.001) and in the multivariate logistic regression analysis (adjusted OR = 0.26; 95% CI 0.12–0.59; p = 0.001). The area under the receiveroperating- characteristic curve was 0.93, based on a risk prediction model that incorporated VO2AT, body mass index and desensitization status. Neither echocardiographic nor measures of aortic compliance were significantly associated with CCU admission. Conclusions: To our knowledge, this is the first prospective observational study to demonstrate the usefulness of CPET as a preoperative risk stratification tool for patients undergoing kidney transplantation. The study suggests that VO2AT has the potential to predict perioperative morbidity in kidney transplant recipients