Fabrication of Microstructure Array using the Projection Microstereolithography System

Microstereolithography technology is similar to the conventional stereolithography process and enables to fabricate a complex 3D microstructure. This is divided into scanning and projection type according to aiming at precision and fabrication speed. The scanning MSL fabricates each layer using position control of laser spot on the resin surface, whereas the projection MSL fabricates one layer with one exposure using a mask. In the projection MSL, DMD used to generate dynamic pattern consists of micromirrors which have per side. The fabrication range and resolution are determined by the field of view of the DMD and the magnification of the projection lens. If using the projection lens with high power, very fine microstructures can be fabricated. In this paper, the projection MSL system adapted to a large surface for array-type fabrication is presented. This system covers the meso range, which is defined as the intermediate range between micro and macro, with a resolution of a few . The fabrication of array-type microstructures has been demonstrated to verify the performance of implemented system

Electron microscopic analysis of necrotic bone and failed implant surface in a patient with medication-related osteonecrosis of the jaw

Background Bisphosphonates (BP), a commonly used medication for various bone diseases, have been known to have severe complications such as bisphosphonate-related osteonecrosis of the jaw (BRONJ). Failure of dental implants has also been found in patients with medication-related osteonecrosis of the jaw (MRONJ). In this study, we analyzed the necrotic bone tissues and the surface of the failed implants removed from the jaw in patients treated with BPs and antiresorptive agents. Results Chronic inflammatory cells with collagen and fibrous tissues and bone sequestrum were shown at 5.0 × , 10.0 × , 20.0 × , and 40.0 × magnified histologic sections in the bone and fibrotic scar tissues removed from patients with MRONJ due to osteonecrosis. Hardened bone tissues with microcracked bony resorbed lacunae were observed in SEM. Unlike the previously published comparative data where immune cells, such as dendritic cells, were found in the failed implant surface, these immune cells were not identified in the BRONJ-related peri-implantitis tissues through the TEM investigations. Furthermore, EDS revealed that in addition to the main titanium element, gold, carbon, oxygen, calcium, phosphorus, silicon, and sulfur elements were found. Conclusion Hardened bone tissues with microcracked bony resorbed lacunae were observed in the SEM findings, which were considered as the main characteristic of the osteonecrosis of the jaw. Immune cells, such as dendritic cells were not identified in the TEM. EDS showed that in addition to the main titanium element, gold, carbon, oxygen, calcium, phosphorus, and silicon elements were found. Furthermore, it was revealed that sulfur was found, which was considered to be one of the complicated causes of implant failure in patients with BRONJ

The Antioxidant Activity and Their Major Antioxidant Compounds from Acanthopanax senticosus and A. koreanum

The antioxidant activity and chlorogenic acid and caffeic acid contents were investigated from different parts of Acanthopanax senticosus and A. koreanum. Antioxidant activity was assessed by various in vitro assays such as DPPH, ABTS, FRAP, reducing power assays and ORAC, and the chlorogenic acid and caffeic acid were validated by HPLC chromatography. Among the various extracts, the fruit extracts of A. senticosus and A. koreanum exhibited strongest antioxidant activities including ABTS, FRAP, reducing power and ORAC, however, strongest DPPH radical scavenging activity was observed from the leaf extract of A. senticosus. In addition, the antioxidant activities of various extracts were correlated with total phenolic and proanthocyanidin contents. The major phenolic contents from various parts of these plants observed that leaf extract of A. senticosus expressed higher levels of chlorogenic acid (14.86 mg/dry weigh g) and caffeic acid (3.09 mg/dry weigh g) than other parts. Therefore, these results suggest that the leaf of A. senticosus may be an excellent natural source for functional foods and pharmaceutical agents, and the validated method was useful for the quality control of A. senticosus

Assessment of Deceased Donor Kidneys Using a Donor Scoring System

∙The authors have no financial conflicts of interest. Purpose: Marginal grafts should be used more actively in Asian countries where deceased donor transplantation is unpopular. We modified a quantitative donor scoring system proposed by Nyberg and his colleagues and developed a donor scoring system in order to assess the quality of deceased donor grafts and their prognostic value as an initial effort to promote usage of marginal donors. Materials and Methods: We retrospectively evaluated 337 patients. Results: A scoring system was derived from six donor variables [age, 0-25; renal function, 0-4; history of hypertension

The Distribution of Fetal Nuchal Translucency Thickness in Normal Korean Fetuses

The aim of present study was to establish normative data for the distribution of nuchal translucency (NT) thickness in normal Korean fetuses. The data were collected from pregnant women with singleton pregnancies in whom fetal ultrasound was performed and the fetal NT thickness was measured between 11 and 14 weeks of gestation. Among them, a total of 2,577 fetuses with a known normal outcome were included in this study. The distribution of multiple of median (MoM) values of the NT thickness with crown-rump length (CRL) in 10-mm intervals and the 95th percentile of MoM were calculated with the linear regression method. The present study showed that NT measurements increase with increasing CRL and a false positive rate increases with increasing gestational age. Therefore, a fixed cut-off point through the first trimester was not appropriate and each NT measurement should be examined according to the gestational age. The present study offers normative data of the fetal NT thickness in a Korean population, which can be used as reference for screening chromosomal aberrations or other congenital abnormalities in the first trimester

An elevated likelihood of stroke, ischemic heart disease, or heart failure in individuals with gout: a longitudinal follow-up study utilizing the National Health Information database in Korea

ObjectiveAccumulating evidence from other countries indicates potential associations between gout and cardiovascular diseases; however, the associations of gout with cardiovascular diseases, particularly stroke, ischemic heart disease, and heart failure, remain ambiguous in the Korean population. We hypothesized that individuals with gout are at a higher likelihood of stroke, ischemic heart disease, or heart failure. This study expands upon previous research by ensuring a comparable baseline between patient and control groups and analyzing 16 years of data derived from an extensive healthcare database.MethodsWe selected 22,480 patients with gout and 22,480 control individuals from the Korean National Health Insurance Service-Health Screening Cohort database (2002–2019), and matched them at a 1:1 ratio according to sex, age, income, and residence. A Cox proportional hazard model with weighted overlap was employed to examine the relationship between gout and the risk of stroke, ischemic heart disease, or heart failure after adjustment for several covariates.ResultsThe incidences of stroke, ischemic heart disease, or heart failure in participants with gout were slightly higher than those in controls (stroke: 9.84 vs. 8.41 per 1000 person-years; ischemic heart disease: 9.77 vs. 7.15 per 1000 person-years; heart failure: 2.47 vs. 1.46 per 1000 person-years). After adjustment, the gout group had an 11% (95% confidence interval [CI] = 1.04–1.19), 28% (95% CI = 1.19–1.37), or 64% (95% CI = 1.41–1.91) higher likelihood of experiencing stroke, ischemic heart disease, or heart failure, respectively, than the control group.ConclusionThe present findings suggest that individuals with gout in the Korean population, particularly those aged ≥ 60 years, were more likely to have stroke, ischemic heart disease, or heart failure

Interferometric Fiber Optic Sensors

Fiber optic interferometers to sense various physical parameters including temperature, strain, pressure, and refractive index have been widely investigated. They can be categorized into four types: Fabry-Perot, Mach-Zehnder, Michelson, and Sagnac. In this paper, each type of interferometric sensor is reviewed in terms of operating principles, fabrication methods, and application fields. Some specific examples of recently reported interferometeric sensor technologies are presented in detail to show their large potential in practical applications. Some of the simple to fabricate but exceedingly effective Fabry-Perot interferometers, implemented in both extrinsic and intrinsic structures, are discussed. Also, a wide variety of Mach-Zehnder and Michelson interferometric sensors based on photonic crystal fibers are introduced along with their remarkable sensing performances. Finally, the simultaneous multi-parameter sensing capability of a pair of long period fiber grating (LPG) is presented in two types of structures; one is the Mach-Zehnder interferometer formed in a double cladding fiber and the other is the highly sensitive Sagnac interferometer cascaded with an LPG pair