Comparisons of full correlation analysis (FCA) and imaging Doppler interferometry (IDI) winds using the Buckland Park MF radar

© European Geosciences Union 2004We present results from three years of mesospheric and thermospheric wind measurements obtained using full correlation analysis (FCA) and imaging Doppler interferometry (IDI) for the Buckland Park MF radar. The IDI winds show excellent agreement with the FCA winds, both for short (2-min) and longer term (hourly, fortnightly) comparisons. An extension to a commonly used statistical analysis technique is introduced to show that the IDI winds are approximately 10% larger than the FCA winds, which we attribute to an underestimation of the FCA winds rather than an indication that IDI overestimates the wind velocity. Although the distribution of IDI effective scattering positions are shown to be consistent with volume scatter predictions, the velocity comparisons contradict volume scatter predictions that the IDI velocity will be overestimated. However, reanalysis of a 14-day data set suggests the lack of overestimation is due to the radial velocity threshold used in the analysis, and that removal of this threshold produces the volume scatter predicted overestimation of the IDI velocities. The merits of using hourly IDI estimates versus hourly averaged 2-min IDI estimates are presented, suggesting that hourly estimated turbulent velocities are overestimated.D. A. Holdsworth and I. M. Rei

The Buckland Park MF radar: routine observation scheme and velocity comparisons

This paper describes the routine observations scheme implemented for the Buckland Park medium frequency (BPMF) radar. These observations are rare among current MF/HF radar observations in that they are made using a relatively narrow transmit polar diagram. The flexibility of the radar allows a number of analyses to be performed simultaneously. The analyses described include the full correlation analysis (FCA), spatial correlation analysis (SCA), hybrid Doppler interferometry (HDI) and imaging Doppler interferometry (IDI) for observations of mesospheric dynamics and the temporal and spatial characteristics of their scatterers, the differential absorption experiment (DAE) for the estimation of electron densities and collision frequencies, and meteor analysis for estimation of meteor height, time and angle of arrival (AOA) distributions. Intercomparisons between wind velocities estimated using the FCA with SCA, HDI and IDI techniques are presented. The FCA velocities exhibit the well-known "triangle size effect" (TSE), whereby the wind velocity is underestimated at smaller antenna spacings. Although the SCA, IDI and HDI techniques were not applied concurrently, comparisons using FCA as a reference suggest these techniques produce velocities in good agreement.D. A. Holdsworth and I. M. Rei

Socioeconomic and demographic drivers of red and processed meat consumption: implications for health and environmental sustainability

Red and processed meat (RPM) intake varies widely globally. In some high income countries the last decade has witnessed an overall decline or stabilisation in the consumption of RPM, in contrast to emerging economies where its consumption continues to increase with rising income and rapid urbanisation. The production and consumption of RPM have become major concerns regarding the environmental impacts of livestock in particular, but also because of associations between high RPM consumption and diet-related non-communicable disease. Therefore it is important to identify socioeconomic and demographic drivers of the consumption of RPM. This paper explores how consumption of RPM differs with age, gender, socio-economic status and in different global contexts. There are some key socioeconomic and demographic patterns in RPM consumption. Men tend to consume RPM more often and in higher quantities, and there is evidence of a social gradient in high income countries, with lower socioeconomic groups consuming RPM more often and in larger quantities. Patterns for consumption with age are less clear cut. It is apparent that consumers in HICs are still consuming high levels of RPM, although the downward shifts in some socioeconomic and demographic groups is encouraging and suggests that strategies could be developed to engage those consumers identified as high RPM consumers. In LMICs, RPM consumption is rising, especially in China and Brazil, and in urban areas. Ways of encouraging populations to maintain their traditional healthy eating patterns need to be found in low and middle income countries, which will have health, environmental and economic co-benefits

Mutations in the Arabidopsis Peroxisomal ABC Transporter COMATOSE Allow Differentiation between Multiple Functions In Planta: Insights from an Allelic Series

COMATOSE (CTS), the Arabidopsis homologue of human Adrenoleukodystrophy protein (ALDP), is required for import of substrates for peroxisomal β-oxidation. A new allelic series and a homology model based on the bacterial ABC transporter, Sav1866, provide novel insights into structure-function relations of ABC subfamily D proteins. In contrast to ALDP, where the majority of mutations result in protein absence from the peroxisomal membrane, all CTS mutants produced stable protein. Mutation of conserved residues in the Walker A and B motifs in CTS nucleotide-binding domain (NBD) 1 resulted in a null phenotype but had little effect in NBD2, indicating that the NBDs are functionally distinct in vivo. Two alleles containing mutations in NBD1 outside the Walker motifs (E617K and C631Y) exhibited resistance to auxin precursors 2,4-dichlorophenoxybutyric acid (2,4-DB) and indole butyric acid (IBA) but were wild type in all other tests. The homology model predicted that the transmission interfaces are domain-swapped in CTS, and the differential effects of mutations in the conserved "EAA motif" of coupling helix 2 supported this prediction, consistent with distinct roles for each NBD. Our findings demonstrate that CTS functions can be separated by mutagenesis and the structural model provides a framework for interpretation of phenotypic data

Mesospheric gravity wave momentum flux estimation using hybrid Doppler interferometry

Published: 12 June 2017Mesospheric gravity wave (GW) momentum flux estimates using data from multibeam Buckland Park MF radar (34.6° S, 138.5° E) experiments (conducted from July 1997 to June 1998) are presented. On transmission, five Doppler beams were symmetrically steered about the zenith (one zenith beam and four off-zenith beams in the cardinal directions). The received beams were analysed with hybrid Doppler interferometry (HDI) (Holdsworth and Reid, 1998), principally to determine the radial velocities of the effective scattering centres illuminated by the radar. The methodology of Thorsen et al. (1997), later re-introduced by Hocking (2005) and since extensively applied to meteor radar returns, was used to estimate components of Reynolds stress due to propagating GWs and/or turbulence in the radar resolution volume. Physically reasonable momentum flux estimates are derived from the Reynolds stress components, which are also verified using a simple radar model incorporating GW-induced wind perturbations. On the basis of these results, we recommend the intercomparison of momentum flux estimates between co-located meteor radars and vertical-beam interferometric MF radars. It is envisaged that such intercomparisons will assist with the clarification of recent concerns (e.g. Vincent et al., 2010) of the accuracy of the meteor radar technique.Andrew J. Spargo, Iain M. Reid, Andrew D. MacKinnon, and David A. Holdswort

Waste-to-fuel opportunities for British quick service restaurants: A case study

The fast food supply chain is facing increasing operating costs due to volatile food and energy prices. Based on a case study of a major fast food logistics operator, this paper quantifies the potential for fuel generation from the waste generated by quick-service restaurants in Britain. Several fuel pathways and supply chains were mapped to understand the carbon intensity of the various waste-to-fuel opportunities, the number of heavy goods vehicles that might be powered and the key factors that could help companies make better informed decisions related to fuel generation from waste. The research suggested that depending on the scenarios considered, between 13.9 and 17.2 million GJ of energy could be obtained from fuels made from the waste arisings of British quick service restaurants and their distribution centres (DCs), representing between 4.4 and 5.8% of the national energy consumption from heavy goods vehicles (HGVs) and well-to-wheel (WTW) greenhouse gases (GHG) savings of between 652 and 898 thousand tonnes of CO2 equivalent annually. Used cooking oil and burger fat arising from British quick-service restaurants could generate enough energy to power up to 3891 HGVs with FAME diesel (B100), 1622 with HVO diesel (B100) or 1943 with biomethane annually. The paper and card generated by these same establishments could also power an additional 4623 biomethane vehicles, wood pallets could power an additional 73 bioethanol trucks and plastics could also power 341 vehicles running with synthetic diesel. The results showed that collections of separate waste fractions by logistics operators could make a relevant contribution towards the decarbonisation of the supply chain while reducing disposal fees and fuel costs. The carbon emissions resulting from this approach depend greatly on the footprint of the collection and transportation systems used to move waste from the restaurants to the processing plants and return the converted fuel back to the distribution centres where the vehicles are refuelled. Logistics firms are in a privileged position to manage these flows as they can use empty back-haul trips to collect and consolidate waste in distribution centres

Origin and significance of 'dispersed facies' basal ice: Svínafellsjökull, Iceland

Dispersed facies basal ice - massive (i.e. structureless) ice with dispersed debris aggregates - is present at the margins of many glaciers and, as a product of internal glacial processes, has the potential to provide important information about the mechanisms of glacier flow and the nature of the subglacial environment. The origin of dispersed facies is poorly understood, with several hypotheses having been advanced for its formation, and there is disagreement as to whether it is largely a sedimentary or a tectonic feature. We test these established hypotheses at the temperate glacier Svfnafellsjokull, Iceland, and find that none fully account for dispersed facies characteristics at this location. Instead, dispersed facies physical, sedimentological and stable-isotope (5180, 8D) characteristics favour a predominantly tectonic origin that we suggest comprises the regelation and straininduced metamorphism of debris-rich basal ice that has been entrained into an englacial position by tectonic processes operating at the base of an icefall. Further thickening of the resultant dispersed facies may also occur tectonically as a result of ice flow against the reverse bed slope of a terminal overdeepening. Lack of efficient subglacial drainage in the region of the overdeepening may limit basal melting and thus favour basal ice preservation, including the preservation of dispersed facies. Despite the relatively low sediment content of dispersed facies (~1.6% by volume), its thickness (up to 25 m) and ubiquity at Svfnafellsjokull results in a significant contribution to annual sediment discharge (1635-3270 m3 a"1) that is ~6.5 times that contributed by debris-rich stratified facies basal ice

Neel order, ring exchange and charge fluctuations in the half-filled Hubbard model

We investigate the ground state properties of the two dimensional half-filled one band Hubbard model in the strong (large-U) to intermediate coupling limit ({\it i.e.} away from the strict Heisenberg limit) using an effective spin-only low-energy theory that includes nearest-neighbor exchange, ring exchange, and all other spin interactions to order t(t/U)^3. We show that the operator for the staggered magnetization, transformed for use in the effective theory, differs from that for the order parameter of the spin model by a renormalization factor accounting for the increased charge fluctuations as t/U is increased from the t/U -> 0 Heisenberg limit. These charge fluctuations lead to an increase of the quantum fluctuations over and above those for an S=1/2 antiferromagnet. The renormalization factor ensures that the zero temperature staggered moment for the Hubbard model is a monotonously decreasing function of t/U, despite the fact that the moment of the spin Hamiltonien, which depends on transverse spin fluctuations only, in an increasing function of t/U. We also comment on quantitative aspects of the t/U and 1/S expansions.Comment: 9 pages - 3 figures - References and details to help the reader adde