84 research outputs found

    High-pressure and high-temperature synthesis of heavy lanthanide sesquisulfides Ln2S3 ( Ln=Yb and Lu)

    Get PDF
    Detailed pressure-temperature phase diagrams of heavy lanthanide sesquisulfides Ln2S3 (Ln = Yb and Lu) have been investigated by in-situ x-ray diffraction experiments under high pressure and high temperature using synchrotron radiation and multi-anvil press. Based on the results of the in-situ observation, the single γ-phase (Th3P4-type structure, I3d) samples of Ln2S3 (Ln = Yb and Lu) have been synthesized under high pressure. The physical properties of the compounds were studied by electrical resistivity, specific heat, and magnetic susceptibility measurements between 2 K and 300 K

    Viscosity of bridgmanite determined by in situ stress and strain measurements in uniaxial deformation experiments

    Get PDF
    To understand mantle dynamics, it is important to determine the rheological properties of bridgmanite, the dominant mineral in Earth’s mantle. Nevertheless, experimental data on the viscosity of bridgmanite are quite limited due to experimental difficulties. Here, we report viscosity and deformation mechanism maps of bridgmanite at the uppermost lower mantle conditions obtained through in situ stress-strain measurements of bridgmanite using deformation apparatuses with the Kawai-type cell. Bridgmanite would be the hardest among mantle constituent minerals even under nominally dry conditions in the dislocation creep region, consistent with the observation that the lower mantle is the hardest layer. Deformation mechanism maps of bridgmanite indicate that grain size of bridgmanite and stress conditions at top of the lower mantle would be several millimeters and ~105 Pa to realize viscosity of 1021–22 Pa·s, respectively. This grain size of bridgmanite suggests that the main part of the lower mantle is isolated from the convecting mantle as primordial reservoirs

    Sound velocity and elastic properties of Fe–Ni–S–Si liquid: the effects of pressure and multiple light elements

    Get PDF
    Fe–Ni–S–Si alloy is considered to be one of the plausible candidates of Mercury core material. Elastic properties of Fe–Ni–S–Si liquid are important to reveal the density profile of the Mercury core. In this study, we measured the P-wave velocity (VP) of Fe–Ni–S–Si (Fe73Ni10S10Si7, Fe72Ni10S5Si13, and Fe67Ni10S10Si13) liquids up to 17 GPa and 2000 K to study the effects of pressure, temperature, and multiple light elements (S and Si) on the VP and elastic properties. The VP of Fe–Ni–S–Si liquids are less sensitive to temperature. The effect of pressure on the VP are close to that of liquid Fe and smaller than those of Fe–Ni–S and Fe–Ni–Si liquids. Obtained elastic properties are KS0 = 99.1(9.4) GPa, KS’ = 3.8(0.1) and ρ0 =6.48 g/cm3 for S-rich Fe73Ni10S10Si7 liquid and KS0 = 112.1(1.5) GPa, KS’ = 4.0(0.1) and ρ0=6.64 g/cm3 for Si-rich Fe72Ni10S5Si13 liquid. The VP of Fe–Ni–S–Si liquids locate in between those of Fe–Ni–S and Fe–Ni–Si liquids. This suggests that the effect of multiple light element (S and Si) on the VP is suppressed and cancel out the effects of single light elements (S and Si) on the VP. The effect of composition on the EOS in the Fe–Ni–S–Si system is indispensable to estimate the core composition combined with the geodesy data of upcoming Mercury mission

    Rheology of hexagonal close-packed(hcp) iron

    Get PDF
    The viscosity of hexagonal close-packed (hcp) Fe is a fundamental property controlling the dynamics of the Earth’s inner core. We studied the rheology of hcp-Fe using high-pressure and -temperature deformation experiments with in situ stress and strain measurements. Experiments were conducted using D111-type and deformation-DIA apparatuses at pressures of 16.3–22.6 GPa, temperatures of 423–923 K, and uniaxial strain rates of 1.52 × 10−6 to 8.81 × 10−5 s−1 in conjunction with synchrotron radiation. Experimental results showed that power-law dislocation creep with a stress exponent of n = 4.0 ± 0.3, activation energy of E* = 240 ± 20 kJ/mol, and activation volume of V* = 1.4 ± 0.2 cm3/mol is dominant deformation mechanism at >∼800 K, whereas a mechanism with power-law breakdown prevails at lower temperatures. An extrapolation of the power-law dislocation creep flow law based on homologous temperature scaling suggests the viscosity of hcp-Fe under inner core conditions is ≥∼1019 Pa s. If this power-law dislocation creep mechanism is assumed to be the dominant mechanism in the Earth’s inner core, the equatorial growth or translation mode mechanism may be the dominant geodynamical mechanism causing the observed inner core structure

    Mantle dynamics inferred from the crystallographic preferred orientation of bridgmanite

    Get PDF
     Seismic shear wave anisotropy is observed in Earth's uppermost lower mantle around several subducted slabs. The anisotropy caused by the deformation-induced crystallographic preferred orientation (CPO) of bridgmanite (perovskite-structured (Mg,Fe)SiO3) is the most plausible explanation for these seismic observations. However, the rheological properties of bridgmanite are largely unknown. Uniaxial deformation experiments have been carried out to determine the deformation texture of bridgmanite, but the dominant slip system (the slip direction and plane) has not been determined. Here we report the CPO pattern and dominant slip system of bridgmanite under conditions that correspond to the uppermost lower mantle (25 gigapascals and 1,873 kelvin) obtained through simple shear deformation experiments using the Kawai-type deformation-DIA apparatus. The fabrics obtained are characterized by [100] perpendicular to the shear plane and [001] parallel to the shear direction, implying that the dominant slip system of bridgmanite is [001](100). The observed seismic shear- wave anisotropies near several subducted slabs (Tonga-Kermadec, Kurile, Peru and Java) can be explained in terms of the CPO of bridgmanite as induced by mantle flow parallel to the direction of subduction

    Stability and Solubility of the FeAlO3 Component in Bridgmanite at Uppermost Lower Mantle Conditions

    Get PDF
    We report the stability and solubility of the FeAlO3 component in bridgmanite based on phase relations in the system MgSiO3-FeAlO3 at 27 GPa and 2000 K using a multi-anvil apparatus combined with in situ synchrotron X-ray diffraction measurements. The results demonstrate that the FeAlO3 component dominates Fe3+ and Al3+ substitution in bridgmanite, although trace amounts of oxygen- and Mg-site vacancy components are also present. Bridgmanite with more than 40 mol% FeAlO3 transforms into the LiNbO3-type phase upon decompression. The FeAlO3 end-member decomposes into corundum and hematite and does not form single-phase bridgmanite. We determined the maximum solubility of the FeAlO3 component in bridgmanite at 27 GPa and 2000 K to be 67 mol%, which is significantly higher than previously reported values (25–36 mol%). We determined the partial molar volume (27.9 mol/cm3) and bulk modulus (197 GPa) of hypothetical FeAlO3 bridgmanite, which are significantly higher and lower than those of AlAlO3 and FeSiO3 bridgmanite, respectively. The non-ideality of MgSiO3-FeAlO3 solid solution (W = 13 kJ/mol, where W is the interaction parameter) is significantly larger than that for MgSiO3-AlAlO3 (5 kJ/mol) and MgSiO3-FeSiO3 (3 kJ/mol) solid solutions. The rapid decrease in abundance of the MgAlO2.5 component in bridgmanite with increasing pressure is enhanced by the presence of the FeAlO3 component. The FeAlO3 content in pyrolite and mid-ocean ridge basalt is far below its solubility limit in bridgmanite and provides new insight into the mineralogy of the lower mantle

    In Situ Synchrotron X-ray Analysis: Application of High-Pressure Sliding Process to Ti Allotropic Transformation

    Get PDF
    In this study, severe plastic deformation through high-pressure sliding (HPS) was applied for in situ high-energy X-ray diffraction analysis at SPring-8 in JASRI (Japan Synchrotron Radiation Research Institute). Allotropic transformation of pure Ti was examined in terms of temperatures, pressures and imposed strain using a miniaturized HPS facility. The true pressure applied on the sample was estimated from the peak shift. Peak broadening due to local variation of pressure was reduced using white X-rays. The phase transformation from α phase to ω phase occurred at a pressure of ∼4.5 GPa. Straining by the HPS processing was effective to promote the transformation to the ω phase and to maintain the ω phase even at ambient pressure. The reverse transformation from ω phase to α phase occurred at a temperature of ∼110°C under ambient pressure, while under higher pressure as ∼4 GPa, the ω phase remained stable even at ∼170°C covered in this study. It was suggested that the reverse transformation from the ω phase to the α phase is controlled by thermal energy

    Curated genome annotation of Oryza sativa ssp. japonica and comparative genome analysis with Arabidopsis thaliana

    Get PDF
    We present here the annotation of the complete genome of rice Oryza sativa L. ssp. japonica cultivar Nipponbare. All functional annotations for proteins and non-protein-coding RNA (npRNA) candidates were manually curated. Functions were identified or inferred in 19,969 (70%) of the proteins, and 131 possible npRNAs (including 58 antisense transcripts) were found. Almost 5000 annotated protein-coding genes were found to be disrupted in insertional mutant lines, which will accelerate future experimental validation of the annotations. The rice loci were determined by using cDNA sequences obtained from rice and other representative cereals. Our conservative estimate based on these loci and an extrapolation suggested that the gene number of rice is ~32,000, which is smaller than previous estimates. We conducted comparative analyses between rice and Arabidopsis thaliana and found that both genomes possessed several lineage-specific genes, which might account for the observed differences between these species, while they had similar sets of predicted functional domains among the protein sequences. A system to control translational efficiency seems to be conserved across large evolutionary distances. Moreover, the evolutionary process of protein-coding genes was examined. Our results suggest that natural selection may have played a role for duplicated genes in both species, so that duplication was suppressed or favored in a manner that depended on the function of a gene

    Variation in in-hospital mortality and its association with percutaneous coronary intervention-related bleeding complications : A report from nationwide registry in Japan.

    Get PDF
    Large-scale registries have demonstrated that in-hospital mortality after percutaneous coronary intervention (PCI) varies widely across institutions. However, whether this variation is related to major procedural complications (e.g., bleeding) is unclear. In this study, institutional variation in in-hospital mortality and its association with PCI-related bleeding complications were investigated. We analyzed 388,866 procedures at 718 hospitals performed from 2017 to 2018, using data from a nationwide PCI registry in Japan. Hospitals were stratified into quintiles according to risk-adjusted in-hospital mortality (very low, low, medium, high, and very high). Incidence of bleeding complications, defined as procedure-related bleeding events that required a blood transfusion, and in-hospital mortality in patients who developed bleeding complications were calculated for each quintile. Overall, 4,048 (1.04%) in-hospital deaths and 1,535 (0.39%) bleeding complications occurred. Among patients with bleeding complications, 270 (17.6%) died during hospitalization. In-hospital mortality ranged from 0.22% to 2.46% in very low to very high mortality hospitals. The rate of bleeding complications varied modestly from 0.27% to 0.57% (odds ratio, 1.95; 95% confidence interval, 1.58–2.39). However, mortality after bleeding complications markedly increased by quintile and was 6-fold higher in very high mortality hospitals than very low mortality hospitals (29.0% vs. 4.8%; odds ratio, 12.2; 95% confidence interval, 6.90–21.7). In conclusion, institutional variation in in-hospital mortality after PCI was associated with procedure-related bleeding complications, and this variation was largely driven by differences in mortality after bleeding complications rather than difference in their incidence. These findings underscore the importance of efforts toward reducing not only bleeding complications but also, even more importantly, subsequent mortality once they have occurred
    corecore