Forward osmosis–membrane distillation hybrid system for desalination using mixed trivalent draw solution

© 2020 Elsevier B.V. Finding suitable draw solutions is still a major problem when developing FO technologies. This study represents the first time a mixed trivalent draw solution containing of EDTA–2Na and Na3PO4 was systemically studied for FO performance. The objective here was to achieve simultaneously low reverse salt flux and high water flux. The FO results showed that the mixed trivalent draw solution-based 0.3 M EDTA–2Na and 0.55 M Na3PO4 underwent higher water flux (Jw = 9.17 L/m2⋅h) than that of pure 0.85 M EDTA-2Na (Jw = 7.02 L/m2⋅h) due to its lower viscosity. Additionally, the specific reverse salt flux caused by mixing 0.3 M EDTA–2Na with 0.55 M Na3PO4 draw solution was only 0.053 g/L using DI water as the feed solution. Donnan equilibrium force and formed complexation of [EDTANa]3-, [HPO4Na]- with the FO membrane are believed to constitute the main mechanism for minimizing salt leakage from the mixed draw solution. Moreover, the FO desalination process utilizing the mixed trivalent draw solution achieved water fluxes of 6.12 L/m2⋅h with brackish water (TDS = 5000 mg/L) and 3.10 L/m2⋅h with seawater (TDS = 35,000 mg/L) as the feed solution. Lastly, diluted mixed trivalent draw solution following the FO process was effectively separated using the MD process with salt rejection >99.99% at a mild feed temperature of 55 °C

Exploration of an innovative draw solution for a forward osmosis-membrane distillation desalination process

© 2017, Springer-Verlag Berlin Heidelberg. Forward osmosis (FO) has emerged as a viable technology to alleviate the global water crisis. The greatest challenge facing the application of FO technology is the lack of an ideal draw solution with high water flux and low reverse salt flux. Hence, the objective of this study was to enhance FO by lowering reverse salt flux and maintaining high water flux; the method involved adding small concentrations of Al2(SO4)3 to a MgCl2 draw solution. Results showed that 0.5 M MgCl2 mixed with 0.05 M of Al2(SO4)3 at pH 6.5 achieved a lower reverse salt flux (0.53 gMH) than that of pure MgCl2 (1.55 gMH) using an FO cellulose triacetate nonwoven (CTA-NW) membrane. This was due possibly to the flocculation of aluminum hydroxide in the mixed draw solution that constricted membrane pores, resulting in reduced salt diffusion. Moreover, average water fluxes of 4.09 and 1.74 L/m2-h (LMH) were achieved over 180 min, respectively, when brackish water (5 g/L) and sea water (35 g/L) were used as feed solutions. Furthermore, three types of membrane distillation (MD) membranes were selected for draw solution recovery; of these, a polytetrafluoroethylene membrane with a pore size of 0.45 μm proved to be the most effective in achieving a high salt rejection (99.90%) and high water flux (5.41 LMH) in a diluted draw solution

Oxidation behavior of graphene-coated copper at intrinsic graphene defects of different origins

The development of ultrathin barrier films is vital to the advanced semiconductor industry. Graphene appears to hold promise as a protective coating; however, the polycrystalline and defective nature of engineered graphene hinders its practical applications. Here, we investigate the oxidation behavior of graphene-coated Cu foils at intrinsic graphene defects of different origins. Macro-scale information regarding the spatial distribution and oxidation resistance of various graphene defects is readily obtained using optical and electron microscopies after the hot-plate annealing. The controlled oxidation experiments reveal that the degree of structural deficiency is strongly dependent on the origins of the structural defects, the crystallographic orientations of the underlying Cu grains, the growth conditions of graphene, and the kinetics of the graphene growth. The obtained experimental and theoretical results show that oxygen radicals, decomposed from water molecules in ambient air, are effectively inverted at Stone-Wales defects into the graphene/Cu interface with the assistance of facilitators

Bone Is Not Essential for Osteoclast Activation

Background: The mechanism whereby bone activates resorptive behavior in osteoclasts, the cells that resorb bone, is unknown. It is known that avb3 ligands are important, because blockade of avb3 receptor signaling inhibits bone resorption, but this might be through inhibition of adhesion or migration rather than resorption itself. Nor is it known whether avb3 ligands are sufficient for resorption the consensus is that bone mineral is essential for the recognition of bone as the substrate appropriate for resorption. Methodology/Principal Findings: Vitronectin- but not fibronectin-coated coverslips induced murine osteoclasts to secrete tartrate-resistant acid phosphatase, as they do on bone. Osteoclasts incubated on vitronectin, unlike fibronectin, formed podosome belts on glass coverslips, and these were modulated by resorption-regulating cytokines. Podosome belts formed on vitronectin-coated surfaces whether the substrates were rough or smooth, rigid or flexible. We developed a novel approach whereby the substrate-apposed surface of cells can be visualized in the scanning electron microscope. With this approach, supported by transmission electron microscopy, we found that osteoclasts on vitronectin-coated surfaces show ruffled borders and clear zones characteristic of resorbing osteoclasts. Ruffles were obscured by a film if cells were incubated in the cathepsin inhibitor E64, suggesting that removal of the film represents substrate-degrading behavior. Analogously, osteoclasts formed resorption-like trails on vitronectin-coated substrates. Like bone resorption, these trails were dependent upon resorbogenic cytokines and were inhibited by E64. Bone mineral induced actin rings and surface excavation only if first coated with vitronectin. Fibronectin could not substitute in any of these activities, despite enabling adhesion and cell spreading. Conclusions/Significance: Our results show that ligands avb3 are not only necessary but sufficient for the induction of resorptive behavior in osteoclasts; and suggest that bone is recognized through its affinity for these ligands, rather than by its mechanical or topographical attributes, or through a putative ‘mineral receptor’

More stories on Th17 cells

For more than two decades, immunologists have been using the so-called Th1/Th2 paradigm to explain most of the phenomena related to adaptive immunity. the Th1/Th2 paradigm implied the existence of two different, mutually regulated, CD4(+) T helper subsets: Th1 cells, driving cell-mediated immune responses involved in tissue damage and fighting infection against intracellular parasites; and Th2 cells that mediate IgE production and are particularly involved in eosinophilic inflammation, allergy and clearance of helminthic infections. A third member of the T helper set, IL-17-producing CD4(+) T cells, now called Th17 cells, was recently described as a distinct lineage that does not share developmental pathways with either Th1 or Th2 cells. the Th17 subset has been linked to autoimmune disorders, being able to produce IL-17, IL-17F and IL-21 among other inflammatory cytokines. Interestingly, it has been reported that there is not only a cross-regulation among Th1, Th2 and Th17 effector cells but there is also a dichotomy in the generation of Th17 and T regulatory cells. Therefore, Treg and Th17 effector cells arise in a mutually exclusive fashion, depending on whether they are activated in the presence of TGF-beta or TGF-beta plus inflammatory cytokines such as IL-6. This review will address the discovery of the Th17 cells, and recent progress on their development and regulation.Crohn's and Colitis Foundation of AmericaNIHLa Jolla Inst Allergy & Immunol, La Jolla, CA 92037 USAUniversidade Federal de São Paulo, Dept Microbiol Immunol & Parasitol, São Paulo, BrazilUniversidade Federal de São Paulo, Dept Microbiol Immunol & Parasitol, São Paulo, BrazilNIH: RO1 AI050265-06Web of Scienc

Biocontrol Potential of Forest Tree Endophytes

Peer reviewe

Household, community, sub-national and country-level predictors of primary cooking fuel switching in nine countries from the PURE study

Introduction. Switchingfrom polluting (e.g. wood, crop waste, coal)to clean (e.g. gas, electricity) cooking fuels can reduce household air pollution exposures and climate-forcing emissions.While studies have evaluated specific interventions and assessed fuel-switching in repeated cross-sectional surveys, the role of different multilevel factors in household fuel switching, outside of interventions and across diverse community settings, is not well understood. Methods.We examined longitudinal survey data from 24 172 households in 177 rural communities across nine countries within the Prospective Urban and Rural Epidemiology study.We assessed household-level primary cooking fuel switching during a median of 10 years offollow up (∼2005–2015).We used hierarchical logistic regression models to examine the relative importance of household, community, sub-national and national-level factors contributing to primary fuel switching. Results. One-half of study households(12 369)reported changing their primary cookingfuels between baseline andfollow up surveys. Of these, 61% (7582) switchedfrom polluting (wood, dung, agricultural waste, charcoal, coal, kerosene)to clean (gas, electricity)fuels, 26% (3109)switched between different polluting fuels, 10% (1164)switched from clean to polluting fuels and 3% (522)switched between different clean fuels