Critical properties of an aperiodic model for interacting polymers

We investigate the effects of aperiodic interactions on the critical behavior of an interacting two-polymer model on hierarchical lattices (equivalent to the Migadal-Kadanoff approximation for the model on Bravais lattices), via renormalization-group and tranfer-matrix calculations. The exact renormalization-group recursion relations always present a symmetric fixed point, associated with the critical behavior of the underlying uniform model. If the aperiodic interactions, defined by s ubstitution rules, lead to relevant geometric fluctuations, this fixed point becomes fully unstable, giving rise to novel attractors of different nature. We present an explicit example in which this new attractor is a two-cycle, with critical indices different from the uniform model. In case of the four-letter Rudin-Shapiro substitution rule, we find a surprising closed curve whose points are attractors of period two, associated with a marginal operator. Nevertheless, a scaling analysis indicates that this attractor may lead to a new critical universality class. In order to provide an independent confirmation of the scaling results, we turn to a direct thermodynamic calculation of the specific-heat exponent. The thermodynamic free energy is obtained from a transfer matrix formalism, which had been previously introduced for spin systems, and is now extended to the two-polymer model with aperiodic interactions.Comment: 19 pages, 6 eps figures, to appear in J. Phys A: Math. Ge

First measurements of the flux integral with the NIST-4 watt balance

In early 2014, construction of a new watt balance, named NIST-4, has started at the National Institute of Standards and Technology (NIST). In a watt balance, the gravitational force of an unknown mass is compensated by an electromagnetic force produced by a coil in a magnet system. The electromagnetic force depends on the current in the coil and the magnetic flux integral. Most watt balances feature an additional calibration mode, referred to as velocity mode, which allows one to measure the magnetic flux integral to high precision. In this article we describe first measurements of the flux integral in the new watt balance. We introduce measurement and data analysis techniques to assess the quality of the measurements and the adverse effects of vibrations on the instrument.Comment: 7 pages, 8 figures, accepted for publication in IEEE Trans. Instrum. Meas. This Journal can be found online at http://ieeexplore.ieee.org/xpl/RecentIssue.jsp?punumber=1

Isotopic Production Cross Sections in Proton-Nucleus Collisions at 200 MeV

Intermediate mass fragments (IMF) from the interaction of $^{27}$Al, $^{59}$Co and $^{197}$Au with 200 MeV protons were measured in an angular range from 20 degree to 120 degree in the laboratory system. The fragments, ranging from isotopes of helium up to isotopes of carbon, were isotopically resolved. Double differential cross sections, energy differential cross sections and total cross sections were extracted.Comment: accepted by Phys. Rev.

Predicting Intermediate Storage Performance for Workflow Applications

Configuring a storage system to better serve an application is a challenging task complicated by a multidimensional, discrete configuration space and the high cost of space exploration (e.g., by running the application with different storage configurations). To enable selecting the best configuration in a reasonable time, we design an end-to-end performance prediction mechanism that estimates the turn-around time of an application using storage system under a given configuration. This approach focuses on a generic object-based storage system design, supports exploring the impact of optimizations targeting workflow applications (e.g., various data placement schemes) in addition to other, more traditional, configuration knobs (e.g., stripe size or replication level), and models the system operation at data-chunk and control message level. This paper presents our experience to date with designing and using this prediction mechanism. We evaluate this mechanism using micro- as well as synthetic benchmarks mimicking real workflow applications, and a real application.. A preliminary evaluation shows that we are on a good track to meet our objectives: it can scale to model a workflow application run on an entire cluster while offering an over 200x speedup factor (normalized by resource) compared to running the actual application, and can achieve, in the limited number of scenarios we study, a prediction accuracy that enables identifying the best storage system configuration

Brown· Midrib Sorghum Silage for Midlactation Dairy Cows

Brown midrib sorghum silage was compared with alfalfa, corn, and normal sorghum silages for its effect on performance, ruminal metabolism, and digestive kinetics of Holstein dairy cows in midlactation. Twelve cows averaging 90 ± 5 DIM were assigned to one of four diets in replicated 4 X 4 Latin squares with 4-wk periods. Additionally, 3 ruminally fistulated cows (95 ± 20 DIM) were assigned to the same diets in a 3x 4 Youden square for measurement of ruminal characteristics. Diets were fed as isonitrogenous TMR that contained 65% silage (OM basis). The DMl was greater for the corn and brown midrib sorghum (4% of BW/d) than for the alfalfa and normal sorghum diets (3.4% of BW/d). The brown midrib sorghum supported FCM production that was similar to that of cows on corn and alfalfa diets (25.8 kg/d), but cows fed normal sorghum produced less milk and fewer milk components. Source of silage had no effect on eating time, but rumination was least for the alfalfa.diet.. Ruminal pH and ammonia concentrations were similar for all diets. Total VFA concentrations were greatest for the corn and brown midrib sorghum diets. The brown midrib sorghum had greater in situ extent of ruminal NDF digestion than did the normal sorghum, which agreed with in vitro data. The brown midrib sorghum used in this experiment supported FCM production similar to the corn and alfalfa silages commonly fed to dairy cows in midlactation

Brown· Midrib Sorghum Silage for Midlactation Dairy Cows

Brown midrib sorghum silage was compared with alfalfa, corn, and normal sorghum silages for its effect on performance, ruminal metabolism, and digestive kinetics of Holstein dairy cows in midlactation. Twelve cows averaging 90 ± 5 DIM were assigned to one of four diets in replicated 4 X 4 Latin squares with 4-wk periods. Additionally, 3 ruminally fistulated cows (95 ± 20 DIM) were assigned to the same diets in a 3x 4 Youden square for measurement of ruminal characteristics. Diets were fed as isonitrogenous TMR that contained 65% silage (OM basis). The DMl was greater for the corn and brown midrib sorghum (4% of BW/d) than for the alfalfa and normal sorghum diets (3.4% of BW/d). The brown midrib sorghum supported FCM production that was similar to that of cows on corn and alfalfa diets (25.8 kg/d), but cows fed normal sorghum produced less milk and fewer milk components. Source of silage had no effect on eating time, but rumination was least for the alfalfa.diet.. Ruminal pH and ammonia concentrations were similar for all diets. Total VFA concentrations were greatest for the corn and brown midrib sorghum diets. The brown midrib sorghum had greater in situ extent of ruminal NDF digestion than did the normal sorghum, which agreed with in vitro data. The brown midrib sorghum used in this experiment supported FCM production similar to the corn and alfalfa silages commonly fed to dairy cows in midlactation

Injection of photoelectrons into dense argon gas

The injection of photoelectrons in a gaseous or liquid sample is a widespread technique to produce a cold plasma in a weakly--ionized system in order to study the transport properties of electrons in a dense gas or liquid. We report here the experimental results of photoelectron injection into dense argon gas at the temperatureT=142.6 K as a function of the externally applied electric field and gas density. We show that the experimental data can be interpreted in terms of the so called Young-Bradbury model only if multiple scattering effects due to the dense environment are taken into account when computing the scattering properties and the energetics of the electrons.Comment: 18 pages, 10 figures, figure nr. 10 has been redrawn, to be submitted to Plasma Sources Science and Technolog

Spanish validation of the revised depression attitude questionnaire (R-daq)

Purpose: The aim of the study was to develop and validate a Spanish version of the Revised Depression Attitude Questionnaire (R-DAQ). Methods: The R-DAQ was used as a baseline for the study. It was translated and tested to ensure the instrument was appropriate for the target population. 537 Ecuadorian healthcare professionals completed the revised Spanish version of the R-DAQ (SR-DAQ). Statistical and exploratory factor analyses were performed to examine construct validity, internal consistency, readability and floor and ceiling effects. Results: Three factors were obtained: “Professional confidence in depression care”; “Therapeutic optimism about depression”; and “Generalist perspective about depression occurrence, recognition, and management”. The internal consistency of the SR-DAQ was determined by means of Cronbach’s α coefficient, with values ranging between 0.61–0.8. The correlations with the English version reflected adequate validity. The model explained 39% of the variance. Subsequent analysis with a sample restricted to those who had received training in depression produced a model that explained 42% of the variance. Conclusion: The SR-DAQ meets the psychometric requirements for measuring depression attitude in a Spanish-speaking population and shows adequate internal consistency and validity

Management of type 2 diabetes mellitus in people with severe mental illness: an online cross-sectional survey of healthcare professionals

Objectives To establish healthcare professionals’ (HCPs) views about clinical roles, and the barriers and enablers to delivery of diabetes care for people with severe mental illness (SMI). Design Cross-sectional, postal and online survey. Setting Trusts within the National Health Service (NHS), mental health and diabetes charities and professional bodies. Participants HCPs who care for people with type 2 diabetes mellitus (T2DM) and/or SMI in the UK. Primary and secondary outcome measures The barriers, enablers and experiences of delivering T2DM care for people with SMI, informed by the Theoretical Domains Framework (TDF). Results Responders were 273 HCPs, primarily mental health nurses (33.7%) and psychiatrists (32.2%). Only 25% of respondents had received training in managing T2DM in people with SMI. Mental health professionals felt responsible for significantly fewer recommended diabetes care standards than physical health professionals (p<0.001). For those seeing diabetes care as part of their role, the significant barriers to its delivery in the regression analyses were a lack of knowledge (p=0.003); a need for training in communication and negotiation skills (p=0.04); a lack of optimism about the health of their clients (p=0.04) and their ability to manage T2DM in people with SMI (p=0.003); the threat of being disciplined (p=0.02); fear of working with people with a mental health condition (p=0.01); a lack of service user engagement(p=0.006) and a need for incentives (p=0.04). The significant enablers were an understanding of the need to tailor treatments (p=0.04) and goals (p=0.02) for people with SMI. Conclusions This survey indicates that despite current guidelines, diabetes care in mental health settings remains peripheral. Even when diabetes care is perceived as part of a HCP’s role, various individual and organisational barriers to delivering recommended T2DM care standards to people with SMI are experienced