Utjecaj sadržaja lijeka i veličine aglomerata na tabletiranje i oslobađanje bromheksin hidroklorida iz aglomerata s talkom pripremljenih kristalokoaglomeracijom

The objective of the investigation was to study the effect of bromhexine hydrochloride (BXH) content and agglomerate size on mechanical, compressional and drug release properties of agglomerates prepared by crystallo-co-agglomeration (CCA). Studies on optimized batches of agglomerates (BXT1 and BXT2) prepared by CCA have showed adequate sphericity and strength required for efficient tabletting. Trend of strength reduction with a decrease in the size of agglomerates was noted for both batches, irrespective of drug loading. However, an increase in mean yield pressure (14.189 to 19.481) with an increase in size was observed for BXT2 having BXH-talc (1:15.7). Surprisingly, improvement in tensile strength was demonstrated by compacts prepared from BXT2, due to high BXH load, whereas BXT1, having a low amount of BXH (BXH-talc, 1:24), showed low tensile strength. Consequently, increased tensile strength was reflected in extended drug release from BXT2 compacts (Higuchi model, R2 = 0.9506 to 0.9981). Thus, it can be concluded that interparticulate bridges formed by BXH and agglomerate size affect their mechanical, compressional and drug release properties.Cilj rada bio je praćenje utjecaja sadržaja bromheksidin hidroklorida (BXH) i veličine aglomerata na mehanička svojstva, kompresivnost i oslobađanje ljekovite tvari iz aglomerata pripravljenih kristalokoaglomeracijom (CCA). Optimizirani pripravci aglomerata (BXT1 i BXT2) pripravljeni CCA metodom pokazuju adekvatnu sferičnost i čvrstoću potrebnu za učinkovito tabletiranje. U oba pripravka se smanjenjem veličine aglomerata smanjivala i čvrstoća, neovisno o količini ljekovite tvari. Međutim, povećanje prosječnog tlaka s povećanjem veličine čestica primijećeno je u pripravku BXT2 s omjerom BXH-talk 1:15,7. Iznenađuje da su kompakti pripravljeni iz BXT2, s visokim sadržajem BXH, imali veću vlačnu čvrstoću, dok su BXT1 s niskim sadržajem BXH (BXH-talk, 1:24) imali manju čvrstoću. Veća vlačna čvrstoća imala je za posljedicu produljeno oslobađanje ljekovite tvari iz BXT2 (Higuchijev model, R2 = 0,9506 do 0,9981). Može se zaključiti da mostovi među česticama BXH i veličina aglomerata utječu na njihova mehanička i kompresivna svojstva te na oslobađanje ljekovite tvari

Multivariate analysis as a method to understand variability in a complex excipient, and its contribution to formulation performance

A key part of the Risk Assessment of excipients is to understand how raw material variability could (or does) contribute to differences in performance of the drug product. Here we demonstrate an approach which achieves the necessary understanding for a complex, functional, excipient. Multivariate analysis (MVA) of the certificates of analysis of an ethylcellulose aqueous dispersion (Surelease) formulation revealed low overall variability of the properties of the systems. Review of the scores plot to highlight batches manufactured using the same ethylcellulose raw material in the formulation, indicated that these batches tend to be more closely related than other randomly selected batches. This variability could result in potential differences in the quality of drug product lots made from these batches. Manufacture of a model drug product from Surelease batches coated using different lots of starting material revealed small differences in the release of a model drug, which could be detected by certain model dependent dissolution modelling techniques, but they were not observed when using model-independent techniques. This illustrates that the techniques are suitable for detecting and understanding excipient variability, but that, in this case, the product was still robust

Evidence-based nanoscopic and molecular framework for excipient functionality in compressed orally disintegrating tablets

The work investigates the adhesive/cohesive molecular and physical interactions together with nanoscopic features of commonly used orally disintegrating tablet (ODT) excipients microcrystalline cellulose (MCC) and D-mannitol. This helps to elucidate the underlying physico-chemical and mechanical mechanisms responsible for powder densification and optimum product functionality. Atomic force microscopy (AFM) contact mode analysis was performed to measure nano-adhesion forces and surface energies between excipient-drug particles (6-10 different particles per each pair). Moreover, surface topography images (100 nm2-10 μm2) and roughness data were acquired from AFM tapping mode. AFM data were related to ODT macro/microscopic properties obtained from SEM, FTIR, XRD, thermal analysis using DSC and TGA, disintegration testing, Heckel and tabletability profiles. The study results showed a good association between the adhesive molecular and physical forces of paired particles and the resultant densification mechanisms responsible for mechanical strength of tablets. MCC micro roughness was 3 times that of D-mannitol which explains the high hardness of MCC ODTs due to mechanical interlocking. Hydrogen bonding between MCC particles could not be established from both AFM and FTIR solid state investigation. On the contrary, D-mannitol produced fragile ODTs due to fragmentation of surface crystallites during compression attained from its weak crystal structure. Furthermore, AFM analysis has shown the presence of extensive micro fibril structures inhabiting nano pores which further supports the use of MCC as a disintegrant. Overall, excipients (and model drugs) showed mechanistic behaviour on the nano/micro scale that could be related to the functionality of materials on the macro scale. © 2014 Al-khattawi et al

Sferična kristalizacija zdravilnih učinkovin

Spherical crystallization of drugs is the process of obtaining larger particles by agglomeration during crystallization. The most common techniques used to obtain such particles are spherical agglomeration and quasi-emulsion solvent diffusion. Ammonia diffusion systems and crystallo-co-agglomeration are extensions of these techniques. By controlling process parameters during crystallization, such as temperature, stirring rate, type and amount of solvents, or excipient selection, it is possible to control the formation of agglomerates and obtain spherical particles of the desired size, porosity, or hardness. Researchers have reported that the particles produced have improved micromeritic, physical, and mechanical properties, which make them suitable for direct compression. In some cases, when additional excipients are incorporated during spherical crystallization, biopharmaceutical parameters including the bioavailability of drugs can also be tailored.Sferična kristalizacija je postopek izdelave večjih delcev z aglomeracijo manjših med samo kristalizacijo. Najpogosteje uporabljeni tehniki za izdelavo takšnih delcev sta sferična aglomeracija in kvaziemulzija z difuzijo topila. Sistem z difuzijo amoniaka in kristalo-ko-aglomeracija sta razširitvi teh dveh metod. Z nadzorovanjem procesnih parametrov med kristalizacijo, kot sta temperatura in hitrost mešanja, z izbiro lastnosti in množine topil ter z izbiro pomožnih snovi, lahko vplivamo na nastanek aglomeratov in izdelamo sferične delce želenih velikosti, primerne poroznosti ali trdote. Raziskovalci poročajo, da imajo izdelani delci izboljšane pretočne lastnosti, izboljšane druge fizikalne in mehanske lastnosti zaradi česar so primerni za direktno tabletiranje. V nekaterih primerih lahko ob vgradnji ustreznih pomožnih snovi, ki jih dodamo med procesom sferične kristalizacije, izboljšamo tudi biofarmacevtske lastnosti zdravilnih učinkovin vključno s povečanjem biološke uporabnosti

Timber joints with glued-in FRP rods

Timber joints with glued-in rods constitute a viable solution for numerous structural applications; they are, however, not widely used, partially for a lack of design guidance. These joints, especially when using fibre-reinforced polymers (FRP), have a series of advantages, e.g., the formation of very strong and stiff connections, very high fire resistance, and improved aesthetics. Experimental and numerical investigations were carried out on joints composed of timber and glued in glass FRP rods. A total of 155 specimens with two different timber species, two different adhesives and a variety of different embedment lengths and rod diameters were produced and tested under quasi-static uni-axial tension short term loading. It was found that the strength increased with the overlap length up to an apparent maximum and that capacity is directly correlated to rod diameter. The accompanying numerical simulation indicated that the joint failures were initiated by a combination of local tension perpendicular to the grain and shear parallel to grain stresses. The numerical model was effective in predicting the structural behavior of these joints, suggesting it can be used to develop a numerical based method to predict failure loads