Standardization of autoimmune testing - is it feasible?

Correct measurement of autoantibodies is essential for the diagnosis of autoimmune diseases. However, due to the variability of autoantibody results and the heterogeneity of testing, wrong diagnosis is a reality. For this and more reasons, harmonization of testing is of the outmost importance. In this review we have summarized the factors contributing to this variability. The ways with which the working group on harmonization of autoantibody testing of the International Federation of Clinical Chemistry and Laboratory Medicine (IFCC) has been trying to tackle the issue with the production and correct use of certified reference materials (CRMs), is discussed. Finally the advantages and the limitations of the use of CRMs are presented

Development of a Certified Reference Material for myeloperoxidase-anti-neutrophil cytoplasmic autoantibodies (MPO-ANCA).

A serum Certified Reference Material (CRM) for supporting reliable autoimmune diagnostics was recently released by the Institute for Reference Materials and Measurements (IRMM) of the Joint Research Centre of the European Commission. It was produced in collaboration with a Working Group on the Harmonisation of Autoimmune Tests of the International Federation of Clinical Chemistry and Laboratory Medicine (IFCC WG-HAT). This material is aimed at facilitating the standardisation of measurements of anti-myeloperoxidase immunoglobulin G antibodies. The CRM could be used as a common calibrant by clinicians and manufacturers thereby significantly improving the comparability of results from commercial immunoassays used for IgG anti-MPO measurements. This paper provides information on the new CRM and its intended use

Invitation to the Table Conversation: A Few Diverse Perspectives on Integration

This article represents an invitation to the integration table to several previously underrepresented perspectives within Christian psychology. The Judeo-Christian tradition and current views on scholarship and Christian faith compel us to extend hospitality to minority voices within integration, thereby enriching and challenging existing paradigms in the field. Contributors to this article, spanning areas of cultural, disciplinary, and theological diversity, provide suggestions for how their distinct voices can enhance future integrative efforts

The certification of anti-myeloperoxidase immunoglobulin G in human serum ERM® - DA476/IFCC

This report describes the production and certification of ERM-DA476/IFCC, a new serum protein reference material intended for the standardisation of measurements of anti-myeloperoxidase immunoglobulin G (anti-MPO IgG) antibodies. The material was produced according to ISO Guide 34:2009. The raw material used to prepare ERM-DA476/IFCC was a plasmapheresis material containing a high concentration of anti-MPO IgG. After a thorough commutability study lyophilised serum was selected as the format for the candidate reference material. Serum processing was performed based on the procedure used for the reference material ERM-DA470k/IFCC. The plasma was converted into serum which was then delipidated. After the addition of preservatives the processed serum was diluted with plasmapheresis solution containing albumin, prior to the transfer of 1 mL aliquots to glass vials. The serum was then lyophilised and the vials closed with rubber stoppers and screw caps under nitrogen atmosphere prior to storage at -70 °C. The between unit-homogeneity was quantified and stability during dispatch and storage were assessed in accordance with ISO Guide 35:2006. The material was characterised by an inter-laboratory comparison exercise performed by laboratories of demonstrated competence and with adherence to ISO/IEC 17025 , using a purified anti-MPO IgG preparation as calibrant. This was achieved using a value transfer protocol previously used in the characterisation of ERM-DA470k/IFCC. Technically invalid results were removed. However no other outliers were eliminated on statistical grounds only. Uncertainties of the certified values were calculated in accordance to the Guide to the Expression of Uncertainty in Measurement (GUM) and include uncertainties relating to possible lack of homogeneity, instability and characterisation. The material is intended for the calibration of methods and quality control. As any reference material, it can also be used for control charts or validation studies. The CRM is available in glass vials containing the lyophilised residue of 1 g serum. The minimum amount of reconstituted sample to be used is 10 μL. The CRM was accepted as European Reference Material (ERM®) after peer evaluation by the partners of the European Reference Materials consortium

Effect of air pollution on daily mortality in Hong Kong.

In different weather conditions, constituents and concentrations of pollutants, personal exposure, and biologic responses to air pollution may vary. In this study we assessed the effects of four air pollutants on mortality in both cool and warm seasons in Hong Kong, a subtropical city. Daily counts of mortality, due to all nonaccidental causes, and cardiovascular and respiratory diseases were modeled with daily pollutant concentrations [24-hr means for nitrogen dioxide, sulfur dioxide, and particulate matter < 10 microm in aerodynamic diameter (PM(10)); 8-hr mean for ozone]. using Poisson regression. We controlled for confounding factors by fitting the terms in models, in line with those recommended by the APHEA (Air Pollution and Health: a European Approach) protocol. Exposure-response relationships in warm and cool seasons were examined using generalized additive modeling. During the cool season, for a linear extrapolation of 10th-90th percentiles in the pollutant concentrations of all oxidant pollutants, NO(2), SO(2), and O(3), we found significant effects on all the mortality outcomes under study, with relative risks (RR) of 1.04-1.10 (p < 0.038, except p = 0.079 for SO(2) on respiratory mortality). We observed consistent positive exposure-response relationships during the cool season but not during the warm season. The effects of PM(10) were marginally significant (RR = 1.06; p = 0.054) for respiratory mortality but not for the other outcomes (p > 0.135). In this subtropical city, local air quality objectives should take into account that air pollution has stronger health effects during the cool rather than warm season and that oxidant pollutants are more important indicators of health effects than particulates

Reference materials (RMs) for analysis of the human factor II (prothrombin) gene G20210A mutation

The Scientific Committee of Molecular Biology Techniques (C-MbT) in Clinical Chemistry of the IFCC has initiated a joint project in co-operation with the European Commission, Joint Research Centre, Institute of Reference Materials and Measurements to develop and produce plasmid-type reference materials (RMs), for the analysis of the human prothrombin gene G20210A mutation. Although DNA tests have a high impact on clinical decision-making and the number of tests performed in diagnostic laboratories is high, issues of quality and quality assurance exist, and currently only a few RMs for clinical genetic testing are available. A gene fragment chosen was produced that spans all primer annealing sites published to date. Both the wild-type and mutant alleles of this gene fragment were cloned into a pUC18 plasmid and two plasmid RMs were produced. In addition, a mixture of both plasmids was produced to mimic the heterozygous genotype. The present study describes the performance of these reference materials in a commutability study, in which they were tested by nine different methods in 13 expert laboratories.. This series of plasmid RMs are, to the best of our knowledge, the first plasmid-type clinical genetic RMs introduced worldwide

Measurement of mechanical vibrations excited in aluminium resonators by 0.6 GeV electrons

We present measurements of mechanical vibrations induced by 0.6 GeV electrons impinging on cylindrical and spherical aluminium resonators. To monitor the amplitude of the resonator's vibrational modes we used piezoelectric ceramic sensors, calibrated by standard accelerometers. Calculations using the thermo-acoustic conversion model, agree well with the experimental data, as demonstrated by the specific variation of the excitation strengths with the absorbed energy, and with the traversing particles' track positions. For the first longitudinal mode of the cylindrical resonator we measured a conversion factor of 7.4 +- 1.4 nm/J, confirming the model value of 10 nm/J. Also, for the spherical resonator, we found the model values for the L=2 and L=1 mode amplitudes to be consistent with our measurement. We thus have confirmed the applicability of the model, and we note that calculations based on the model have shown that next generation resonant mass gravitational wave detectors can only be expected to reach their intended ultra high sensitivity if they will be shielded by an appreciable amount of rock, where a veto detector can reduce the background of remaining impinging cosmic rays effectively.Comment: Tex-Article with epsfile, 34 pages including 13 figures and 5 tables. To be published in Rev. Scient. Instr., May 200

‘O sibling, where art thou?’ – a review of avian sibling recognition with respect to the mammalian literature

Avian literature on sibling recognition is rare compared to that developed by mammalian researchers. We compare avian and mammalian research on sibling recognition to identify why avian work is rare, how approaches differ and what avian and mammalian researchers can learn from each other. Three factors: (1) biological differences between birds and mammals, (2) conceptual biases and (3) practical constraints, appear to influence our current understanding. Avian research focuses on colonial species because sibling recognition is considered adaptive where ‘mixing potential’ of dependent young is high; research on a wider range of species, breeding systems and ecological conditions is now needed. Studies of acoustic recognition cues dominate avian literature; other types of cues (e.g. visual, olfactory) deserve further attention. The effect of gender on avian sibling recognition has yet to be investigated; mammalian work shows that gender can have important influences. Most importantly, many researchers assume that birds recognise siblings through ‘direct familiarisation’ (commonly known as associative learning or familiarity); future experiments should also incorporate tests for ‘indirect familiarisation’ (commonly known as phenotype matching). If direct familiarisation proves crucial, avian research should investigate how periods of separation influence sibling discrimination. Mammalian researchers typically interpret sibling recognition in broad functional terms (nepotism, optimal outbreeding); some avian researchers more successfully identify specific and testable adaptive explanations, with greater relevance to natural contexts. We end by reporting exciting discoveries from recent studies of avian sibling recognition that inspire further interest in this topic