Universal deformation rings of modules for algebras of dihedral type of polynomial growth

Let k be an algebraically closed field, and let \Lambda\ be an algebra of dihedral type of polynomial growth as classified by Erdmann and Skowro\'{n}ski. We describe all finitely generated \Lambda-modules V whose stable endomorphism rings are isomorphic to k and determine their universal deformation rings R(\Lambda,V). We prove that only three isomorphism types occur for R(\Lambda,V): k, k[[t]]/(t^2) and k[[t]].Comment: 11 pages, 2 figure

‘What cannot be helped must be indured’: Coping with obstacles to business during the Anglo-Dutch Wars, 1652-1674

By nature, wars appear hostile to commerce, bringing disruption to international relations and to everyday life. By focusing on the individuals involved in continuing commerce, however, an increasing body of scholarship has shown that merchants in a number of contexts continued to operate successfully during periods of war. This article builds on these recent methodological shifts in business history, applying them to the three Anglo-Dutch Wars of the seventeenth century. Although these conflicts have been described as being harmful to commerce, there has been no focus hitherto on merchants’ experiences of or responses to these wars. This article addresses this problem and, in so doing, proposes a different way of analyzing and thus characterizing the relationship between the Anglo-Dutch Wars and business. Through examining the surviving correspondence of merchants operating during these wars, I investigate the various methods used – both successfully and unsuccessfully – to navigate obstacles to business during these conflicts. The value of considering this activity in broader British and European contexts is explored, and the range of concerns exhibited by merchants during these periods of conflict is analyzed, showing that war was not paramount among their concerns, despite the political context. Throughout, I show that although all three Anglo-Dutch Wars had an impact on commerce, this was not necessarily negative, and that the most enterprising and proactive merchants benefitted from commercial opportunities created by the conflicts

Streaming birefringence in extensional flow of polymer solutions

The stress and birefringence in liquid filaments undergoing an extensional flow were measured in an isothermal filament-spinning apparatus. In conjunction with these measurements, an experimental arrangement is described which, as subsequent analyses show, overcomes the difficulties associated with the measurement of birefringence in this geometry. The fluids studied were 1 1/2% and 2 1/2% solutions of two polyacrylamides (Separan AP 30 and Separan AP 273) in a 1 : 1 water/glycerol mixture and a 5% solution of polystyrene (Styron 686) in Aroclor 1254. For all solutions studied, the measured birefringence exhibited a non-linear relation to the principal stress difference. In addition, for the polystyrene/Aroclor solution, the birefringence measured in extension was nearly two orders of magnitude higher than the birefringence in shear at comparable deformation rates. These observations imply a greater degree of molecular orientation is produced by the extensional flow than the shear flow and suggest that birefringence data obtained in shear and extension are useful complements to depict a wider range of stress-optical behavior. On a mesuré l'éffet Maxwell, c'est-à-dire la biréfringence en fonction de la tension, dans des filaments liquides de solution polymérique soumise a un écoulement extensionel. Au moyen d'un appareil spécial, on a réussi a resoudre les problèmes d'optique provenant de cette configuration expérimentale. Avec cet appareil, on a étudié plusieurs solutions aqueuses des polyacrylamides en glycérine aussi bien q'une solution du polystyrene en Arochlor 1254 (polychlor biphenyl).Peer Reviewedhttp://deepblue.lib.umich.edu/bitstream/2027.42/47202/1/397_2005_Article_BF01736956.pd

MACHINING ELIMINATION THROUGH APPLICATION OF THREAD FORMING FASTENERS IN NET SHAPED CAST HOLES

The ultimate objective of this work was to eliminate approximately 30% of the machining performed in typical automotive engine and transmission plants by using thread forming fasteners in as-cast holes of aluminum and magnesium cast components. The primary issues at the source of engineersÃÂÃÂÃÂÃÂÃÂÃÂÃÂâÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂàreluctance to implementing thread forming fasteners in lightweight castings are: * Little proof of consistency of clamp load vs. input torque in either aluminum or magnesium castings. * No known data to understand the effect on consistency of clamp load as casting dies wear. The clamp load consistency concern is founded in the fact that a portion of the input torque used to create clamp load is also used to create threads. The torque used for thread forming may not be consistent due to variations in casting material, hole size and shape due to tooling wear and process variation (thermal and mechanical). There is little data available to understand the magnitude of this concern or to form the basis of potential solutions if the range of clamp load variation is very high (> +/- 30%). The range of variation that can be expected in as-cast hole size and shape over the full life cycle of a high pressure die casting die was established in previous work completed by Pacific Northwest National Laboratory, (PNNL). This established range of variation was captured in a set of 12 cast bosses by designing core pins at the size and draft angles identified in the sited previous work. The cast bosses were cut into ÃÂÃÂÃÂÃÂÃÂÃÂÃÂâÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂnutsÃÂÃÂÃÂÃÂÃÂÃÂÃÂâÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂàthat could be used in the Ford Fastener Laboratory test-cell to measure clamp load when a thread forming fastener was driven into a cast nut. There were two sets of experiments run. First, a series of cast aluminum nuts were made reflecting the range of shape and size variations to be expected over the life cycle of a die casting die. Taptite thread forming fasteners, (a widely used thread forming fastener suitable for aluminum applications), were driven into the various cored, as-cast nuts at a constant input torque and resulting clamp loads were recorded continuously. The clamp load data was used to determine the range of clamp loads to be expected. The bolts were driven to failure. The clamp load corresponding to the target input of 18.5 Nm was recorded for each fastener. In a like fashion, a second set of experiments were run with cast magnesium nuts and ALtracs thread forming fasteners, (a widely used thread forming fastener suitable for magnesium applications). Again all clamp loads were recorded and analyzed similarly to the Taptites in aluminum cast nuts. Results from previous work performed on the same test cell for a Battelle project using standard M8 bolts into standard M8 nuts were included as a comparator for a standard bolt and nut application. The results for the thread forming fasteners in aluminum cast holes were well within industry expectations of +/- 30% for out of the box and robustness range testing. The results for the dry and lubed extreme conditions were only slightly higher than industry expectations at +/- 35.6%. However, when compared to the actual Battelle results (+/- 40%) for a standard bolt and nut the tread forming fasteners performed slightly better. The results for the thread forming fasteners in magnesium cast holes were all well within industry expectations of +/- 30% for all three conditions. The robustness range (.05mm larger and smaller holes than the expected wear pattern of a die casting die at full life cycle) results also fell within the industry expectations for standard threaded fasteners. These results were very encouraging. It was concluded that this work showed that clamp load variation with thread forming fasteners is consistent with industry expectations for standard steel bolts and nuts at +/- 30%. There does not appear to be any significant increase in clamp load variation due to the application of thread forming fasteners in as-cast holes of aluminum or magnesium over the effective life of a die casting mold. The fully implemented potential benefit of thread forming fasteners in as-cast holes of aluminum and magnesium is estimated to be 6 trillion Btu per year for North America. Economic benefit is estimated to be nearly $800 million per year. Environmental benefits and quality improvements will also result from full implementation of this technology

Lateralization of ERPs to speech and handedness in the early development of Autism Spectrum Disorder

Background: Language is a highly lateralized function, with typically developing individuals showing left hemispheric specialization. Individuals with autism spectrum disorder (ASD) often show reduced or reversed hemispheric lateralization in response to language. However, it is unclear when this difference emerges and whether or not it can serve as an early ASD biomarker. Additionally, atypical language lateralization is not specific to ASD as it is also seen more frequently in individuals with mixed- and left-handedness. Here, we examined early asymmetry patterns measured through neural responses to speech sounds at 12 months and behavioral observations of handedness at 36 months in children with and without ASD. Methods: Three different groups of children participated in the study: low-risk controls (LRC), high risk for ASD (HRA; infants with older sibling with ASD) without ASD, and HRA infants who later receive a diagnosis of ASD (ASD). Event-related potentials (ERPs) to speech sounds were recorded at 12 months. Utilizing a novel observational approach, handedness was measured by hand preference on a variety of behaviors at 36 months. Results: At 12 months, lateralization patterns of ERPs to speech stimuli differed across the groups with the ASD group showing reversed lateralization compared to the LRC group. At 36 months, factor analysis of behavioral observations of hand preferences indicated a one-factor model with medium to high factor loadings. A composite handedness score was derived; no group differences were observed. There was no association between lateralization to speech at 12 months and handedness at 36 months in the LRC and HRA groups. However, children with ASD did show an association such that infants with lateralization patterns more similar to the LRC group at 12 months were stronger right-handers at 36 months. Conclusions: These results highlight early developmental patterns that might be specific to ASD, including a potential early biomarker of reversed lateralization to speech stimuli at 12 months, and a relation between behavioral and neural asymmetries. Future investigations of early asymmetry patterns, especially atypical hemispheric specialization, may be informative in the early identification of ASD

The role of the chemokine receptor CXCR4 in infection with feline immunodeficiency virus

Infection with feline immunodeficiency virus (FIV) leads to the development of a disease state similar to AIDS in man. Recent studies have identified the chemokine receptor CXCR4 as the major receptor for cell culture-adapted strains of FIV, suggesting that FIV and human immunodeficiency virus (HIV) share a common mechanism of infection involving an interaction between the virus and a member of the seven transmembrane domain superfamily of molecules. This article reviews the evidence for the involvement of chemokine receptors in FIV infection and contrasts these findings with similar studies on the primate lentiviruses HIV and SIV (simian immunodeficiency virus)

Risk of longer-term neurological conditions in the Deepwater Horizon Oil Spill Coast Guard Cohort Study – Five years of follow-up

Background: Long-term neurological health risks associated with oil spill cleanup exposures are largely unknown. We aimed to investigate risks of longer-term neurological conditions among U.S. Coast Guard (USCG) responders to the 2010 Deepwater Horizon (DWH) oil spill. Methods: We used data from active duty members of the DWH Oil Spill Coast Guard Cohort Study (N=45224). Self-reported oil spill exposures were ascertained from post-deployment surveys. Incident neurological outcomes were classified using International Classification of Diseases, 9th Revision, codes from military health encounter records up to 5.5 years post-DWH. We used Cox Proportional Hazards regression to calculate adjusted hazard ratios (aHR) and 95% confidence intervals (CI) for various incident neurological diagnoses (2010–2015). Oil spill responder (n=5964) vs. non-responder (n= 39260) comparisons were adjusted for age, sex, and race, while within-responder comparisons were additionally adjusted for smoking. Results: Compared to those not responding to the spill, spill responders had reduced risks for headache (aHR=0.84, 95% CI: 0.74-0.96), syncope and collapse (aHR=0.74, 95% CI: 0.56-0.97), and disturbance of skin sensation (aHR=0.81, 95% CI: 0.68-0.96). Responders reporting ever (n=1068) vs. never (n=2424) crude oil inhalation exposure were at increased risk for several individual and grouped outcomes related to headaches and migraines (aHR range: 1.39-1.83). Crude oil inhalation exposure was also associated with elevated risks for an inflammatory nerve condition, mononeuritis of upper limb and mononeuritis multiplex (aHR=1.71, 95% CI: 1.04-2.83), and tinnitus (aHR=1.91, 95% CI: 1.23-2.96), a condition defined by ringing in one or both ears. Risk estimates for those neurological conditions were higher in magnitude among responders reporting exposure to both crude oil and oil dispersants than among those reporting crude oil only. Conclusion: In this large study of active duty USCG responders to the DWH disaster, self-reported spill cleanup exposures were associated with elevated risks for longer-term neurological conditions

Potential health impacts of heavy metals on HIV-infected population in USA.

Noninfectious comorbidities such as cardiovascular diseases have become increasingly prevalent and occur earlier in life in persons with HIV infection. Despite the emerging body of literature linking environmental exposures to chronic disease outcomes in the general population, the impacts of environmental exposures have received little attention in HIV-infected population. The aim of this study is to investigate whether individuals living with HIV have elevated prevalence of heavy metals compared to non-HIV infected individuals in United States. We used the National Health and Nutrition Examination Survey (NHANES) 2003-2010 to compare exposures to heavy metals including cadmium, lead, and total mercury in HIV infected and non-HIV infected subjects. In this cross-sectional study, we found that HIV-infected individuals had higher concentrations of all heavy metals than the non-HIV infected group. In a multivariate linear regression model, HIV status was significantly associated with increased blood cadmium (p=0.03) after adjusting for age, sex, race, education, poverty income ratio, and smoking. However, HIV status was not statistically associated with lead or mercury levels after adjusting for the same covariates. Our findings suggest that HIV-infected patients might be significantly more exposed to cadmium compared to non-HIV infected individuals which could contribute to higher prevalence of chronic diseases among HIV-infected subjects. Further research is warranted to identify sources of exposure and to understand more about specific health outcomes

Understanding psychiatric institutionalization: a conceptual review

This is an Open Access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/2.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited