Relationship between metabolic syndrome and angiographic severity of coronary artery disease

BACKGROUND: There are a few literature data on the correlation between metabolic syndrome (MetS) and coronary disease among Iranian population. This study aimed to find relationship between MetS and severity of coronary artery disease (CAD) in presence of diabetes. METHODS: Total of 192 patients were consecutively enrolled in the study who were admitted to coronary care unit because of acute coronary syndrome (ACS) and then underwent coronary angiography. MetS was defined by Iranian criteria. A coronary atherosclerosis score was used to quantify the extent of atherosclerotic involvement. The relationship between MetS and angiographic coronary artery disease (CAD) severity or clinical presentation was compared between them after adjusting for diabetes. RESULTS: Individuals with MetS (n = 125) had a higher prevalence of ST-elevation myocardial infarction (71 vs 30, P < 0.001), multi-vessel disease (50 vs. 34, P = 0.003), decreased ejection fraction (P = 0.001) and more severe angiographic stenosis based on both modified Gensini (P = 0.081) and syntax (P = 0.008) scores, compared to those without MetS. Syntax score showed statistically significant difference between two groups before (P = 0.021) and after adjustment for diabetes (P = 0.005). CONCLUSION: MetS was related to the severity of CAD both clinically and by angiographic scores but diabetes was a challenging factor and may independently increase the severity of CAD. © 2016,.Isfahan University of Medical Sciences(IUMS). All rights reserved

Relationship between metabolic syndrome and angiographic severity of coronary artery disease

BACKGROUND: There are a few literature data on the correlation between metabolic syndrome (MetS) and coronary disease among Iranian population. This study aimed to find relationship between MetS and severity of coronary artery disease (CAD) in presence of diabetes. METHODS: Total of 192 patients were consecutively enrolled in the study who were admitted to coronary care unit because of acute coronary syndrome (ACS) and then underwent coronary angiography. MetS was defined by Iranian criteria. A coronary atherosclerosis score was used to quantify the extent of atherosclerotic involvement. The relationship between MetS and angiographic coronary artery disease (CAD) severity or clinical presentation was compared between them after adjusting for diabetes. RESULTS: Individuals with MetS (n = 125) had a higher prevalence of ST-elevation myocardial infarction (71 vs 30, P < 0.001), multi-vessel disease (50 vs. 34, P = 0.003), decreased ejection fraction (P = 0.001) and more severe angiographic stenosis based on both modified Gensini (P = 0.081) and syntax (P = 0.008) scores, compared to those without MetS. Syntax score showed statistically significant difference between two groups before (P = 0.021) and after adjustment for diabetes (P = 0.005). CONCLUSION: MetS was related to the severity of CAD both clinically and by angiographic scores but diabetes was a challenging factor and may independently increase the severity of CAD. © 2016,.Isfahan University of Medical Sciences(IUMS). All rights reserved

Biofeedback efficacy to improve clinical symptoms and endoscopic signs of solitary rectal ulcer syndrome

Solitary rectal ulcer syndrome (SRUS) is often resistant to medical and surgical treatment. This study assessed the effect of biofeedback in decreasing the symptoms and the healing of endoscopic signs in SRUS patients. Before starting the treatment, endoscopy and colorectal manometry was performed to evaluate dyssynergic defecation. Patients were followed every four weeks, and during each visit their response to treatment was evaluated regarding to manometry pattern. After at least 50 improvement in manometry parameters, recipients underwent rectosigmoidoscopy. Endoscopic response to biofeedback treatment and clinical symptoms were investigated. Duration of symptoms was 43.11±36.42 months in responder and 63.9 ± 45.74 months in non-responder group (P=0.22). There were more ulcers in non-responder group than responder group (1.50 ±0.71 versus 1.33±- 0.71 before and 1.30 ± 0.95 versus 0.67 ±0.50 after biofeedback), although the difference was not significant (P=0.604, 0.10 respectively). The most prevalent symptoms were constipation (79), rectal bleeding (68) and anorectal pain (53). The most notable improvement in symptoms after biofeedback occured in abdominal pain and incomplete evacuation, and the least was seen in mucosal discharge and toilet waiting as shown in the bar chart. Endoscopic cure was observed in 4 of 10 patients of the non-responder group while 8 patients in responder group experienced endoscopic improvement. It seems that biofeedback has significant effect for pathophysiologic symptoms such as incomplete evacuation and obstructive defecation. Improvement of clinical symptoms does not mean endoscopic cure; so to demonstrate remission the patients have to go under rectosigmoidoscopy. © PAGEPress 2008-2018

Approaches in biotechnological applications of natural polymers

Natural polymers, such as gums and mucilage, are biocompatible, cheap, easily available and non-toxic materials of native origin. These polymers are increasingly preferred over synthetic materials for industrial applications due to their intrinsic properties, as well as they are considered alternative sources of raw materials since they present characteristics of sustainability, biodegradability and biosafety. As definition, gums and mucilages are polysaccharides or complex carbohydrates consisting of one or more monosaccharides or their derivatives linked in bewildering variety of linkages and structures. Natural gums are considered polysaccharides naturally occurring in varieties of plant seeds and exudates, tree or shrub exudates, seaweed extracts, fungi, bacteria, and animal sources. Water-soluble gums, also known as hydrocolloids, are considered exudates and are pathological products; therefore, they do not form a part of cell wall. On the other hand, mucilages are part of cell and physiological products. It is important to highlight that gums represent the largest amounts of polymer materials derived from plants. Gums have enormously large and broad applications in both food and non-food industries, being commonly used as thickening, binding, emulsifying, suspending, stabilizing agents and matrices for drug release in pharmaceutical and cosmetic industries. In the food industry, their gelling properties and the ability to mold edible films and coatings are extensively studied. The use of gums depends on the intrinsic properties that they provide, often at costs below those of synthetic polymers. For upgrading the value of gums, they are being processed into various forms, including the most recent nanomaterials, for various biotechnological applications. Thus, the main natural polymers including galactomannans, cellulose, chitin, agar, carrageenan, alginate, cashew gum, pectin and starch, in addition to the current researches about them are reviewed in this article.. }To the Conselho Nacional de Desenvolvimento Cientfíico e Tecnológico (CNPq) for fellowships (LCBBC and MGCC) and the Coordenação de Aperfeiçoamento de Pessoal de Nvíel Superior (CAPES) (PBSA). This study was supported by the Portuguese Foundation for Science and Technology (FCT) under the scope of the strategic funding of UID/BIO/04469/2013 unit, the Project RECI/BBB-EBI/0179/2012 (FCOMP-01-0124-FEDER-027462) and COMPETE 2020 (POCI-01-0145-FEDER-006684) (JAT)

Secalin films acylated with capric acid chloride

Secalin was chemically modified using the acylation reaction with the aim to prepare less hydrophilic protein-based films with features suitable for applications in food packaging. The acylation of secalin was done at different capric acid chloride concentrations (2–6 mmol/g) and confirmed using elementary and Fourier-transform infrared spectroscopy analyses. The water sensitivity of the films prepared with acylated secalin was observed to be significantly improved. The control film elongation at break was ~67% and increased up to 141% at high levels of acylation, whereas tensile strength and Young's modulus increased up to 4.5 and 39.4 MPa, respectively when lower amounts of capric acid chloride were used and, on the other hand, decreased with increasing amounts. Thermal analyses suggested that the glass transition temperature of acylated films was lower at higher capric acid chloride concentrations, whereas the melting temperature increased and the thermal stability improved. Scanning electron microscopy showed a more homogeneous surface of the films obtained with acylated secalin

Rye secalin characterisation and use to improve zein-based film performance

Rye prolamins (secalin) were extracted, characterised and used as biopolymer source to produce plasticised films, as well as composite films in the presence of corn zein. Secalin film showed lower contact angle values and higher moisture content, solubility and swelling index than zein film, whereas the water vapour permeability of the two films was not different. Also, secalin film exhibited lower tensile strength and Young’s modulus and higher elongation at break. The average functional properties of the secalin/zein blend were morphologically confirmed by SEM analysis of the composite film surface that showed a good miscibility and compatibility of the two different biopolymers. These results indicated that secalin films were less hydrophobic and more flexible than those previously prepared by using other prolamins, whereas a material with hydrophobic features similar to those of zein films and a flexibility comparable to that exhibited by secalin films was obtained by preparing a secalin/zein blend

Oral health status and its determinants among opiate dependents:a cross-sectional study

Abstract Background: In addition to numerous general health problems, drug dependents manifest various oral health disorders. Our aim was to investigate the oral health status and its determinants among in-treatment opiate dependents. Methods: As part of a comprehensive cross-sectional survey on opiate dependents admitted to methadone maintenance centers in Tehran, Iran, we conducted a clinical study in two centers from different socioeconomic areas. A trained dentist conducted face to face interviews and clinical oral examinations based on World Health Organization (WHO) criteria for Decayed, Missing, Filled Teeth (DMFT) index and Community Periodontal Index (CPI) on volunteer patients. Student’s t-test, Mann-Whitney U, Kruskal Wallis, and Chi2 tests, in addition to linear and logistic regression models served for statistical analysis (p < 0.05). Results: A total of 217 patients (98% men), with a mean age of 43.6 years (SD 12.3) participated in the study. Opium was the main drug of abuse reported by 70% of the participants followed by crystalline heroin (22%). Of the participants, 24.4% were totally edentulous. The mean DMFT score of participants was 20.3 (SD 7.8). Missing teeth comprised the main part of the index followed by decayed and filled teeth. Older patients (p < 0.001) and the patients with a lower socioeconomic status (p = 0.01) had higher DMFT scores. None of the dentate patients had a healthy periodontium. Maximum CPI mostly consisted of shallow pockets (66%) followed by calculus in 15%, deep pockets in 11%, and bleeding in 8% of the participants. Older participants (p = 0.02) and those who started drug abuse at a younger age (p = 0.01) were more likely to develop periodontal pockets. Conclusions: Opiate dependents had a poor oral health status in terms of the dentition status and periodontal health. Missing teeth comprised the main part of their dental caries history and none had a healthy periodontium. Oral health care should be integrated into the package of general health services available in treatment centers

Potential use of glycerol- and/or spermidine-plasticized secalin films as leaf surface coatings for sustainable plant disease management

The effects of spermidine (SPD) on the properties of both secalin (SCL)-based film-forming solutions (FFSs) and their resultant films were studied in the absence or presence of glycerol (GLY) used as primary plasticizer. The average size of SCL particles significantly increased with the increase of SPD concentration, mainly in the presence of GLY, while the negative zeta potential values parallely decreased suggesting a greater stability of the FFSs containing SPD concentrations lower than 1.0 mM. In addition, the decreased contact angle value, compared to water and ethanol solution, indicated that SCL FFSs were highly hydrophobic and that it might be spreaded easily on hydrophobic biological surfaces. SPD could replace GLY in obtaining handleable, homogeneous and performing SCL-based films. The film tensile strength and the Young's module strongly increased in the absence of GLY, reaching values higher than 5 times with respect to controls, whereas elongation at break value of GLY-plasticized films containing 5.0 mM SPD was twice of that of the films prepared without SPD. Conversely, the film moisture content, water solubility and swelling ratio progressively decreased, both in the presence and absence of GLY, up to a SPD concentration of 1.0 mM, whereas the film contact angle increased, confirming the enhancement of its hydrophobicity determined by SPD incorporation. SPD also increased the film barrier properties to gases and water vapor, while the presence of GLY hindered these effects. Finally, SEM analysis of the cross-sections of the SPD containing films showed heterogeneous microstructures, whereas their surfaces appeared rougher than those of the control films. Preliminary experiments carried out by Rosa chinensis Jacq. leaf coating suggest the potential use of SCL-based FFSs spraying in plant disease control. High spreading of the SCL-based FFSs on the entire leaf surfaces, both in the presence and absence of Bordeaux mixture tested as agrochemical, was observed, and the SEM images showed the formation of an evident coating of the leaves. Therefore, these findings suggest the possibility to coat the leaf surface also in vivo with different SCL-based FFSs, giving rise to films possessing tailored functional properties and able to carry and release different agrochemicals