71,885 research outputs found

    The Effect of Scattering on Pulsar Polarization Angle

    Full text link
    The low-frequency profiles of some pulsars manifest temporal broadening due to scattering, usually accompanied by flat polarization position angle (PA) curves. Assuming that the scattering works on the 4 Stokes parameters in the same way, we have simulated the effect of scattering on polarization profiles and find that the scattering can indeed flatten the PA curves. Since the higher-frequency profiles suffer less from scattering, they are convolved with scattering models to fit the observed low-frequency profiles. The calculated flat PA curves exactly reproduce the corresponding observations.Comment: 4 pages. Accepted by A&

    The effect of asymmetry of the coil block on self-assembly in ABC coil-rod-coil triblock copolymers

    Full text link
    Using the self-consistent field approach, the effect of asymmetry of the coil block on the microphase separation is focused in ABC coil-rod-coil triblock copolymers. For different fractions of the rod block fBf_{\text B}, some stable structures are observed, i.e., lamellae, cylinders, gyroid, and core-shell hexagonal lattice, and the phase diagrams are constructed. The calculated results show that the effect of the coil block fraction fAf_{\text A} is dependent on fBf_{\text B}. When fB=0.2f_{\text B}=0.2, the effect of asymmetry of the coil block is similar to that of the ABC flexible triblock copolymers; When fB=0.4f_{\text B}=0.4, the self-assembly of ABC coil-rod-coil triblock copolymers behaves like rod-coil diblock copolymers under some condition. When fBf_{\text B} continues to increase, the effect of asymmetry of the coil block reduces. For fB=0.4f_{\text B}=0.4, under the symmetrical and rather asymmetrical conditions, an increase in the interaction parameter between different components leads to different transitions between cylinders and lamellae. The results indicate some remarkable effect of the chain architecture on self-assembly, and can provide the guidance for the design and synthesis of copolymer materials.Comment: 9 pages, 3 figure

    Effect of polymer concentration and length of hydrophobic end block on the unimer-micelle transition broadness in amphiphilic ABA symmetric triblock copolymer solutions

    Full text link
    The effects of the length of each hydrophobic end block N_{st} and polymer concentration \bar{\phi}_{P} on the transition broadness in amphiphilic ABA symmetric triblock copolymer solutions are studied using the self-consistent field lattice model. When the system is cooled, micelles are observed, i.e.,the homogenous solution (unimer)-micelle transition occurs. When N_{st} is increased, at fixed \bar{\phi}_{P}, micelles occur at higher temperature, and the temperature-dependent range of micellar aggregation and half-width of specific heat peak for unimer-micelle transition increase monotonously. Compared with associative polymers, it is found that the magnitude of the transition broadness is determined by the ratio of hydrophobic to hydrophilic blocks, instead of chain length. When \bar{\phi}_{P} is decreased, given a large N_{st}, the temperature-dependent range of micellar aggregation and half-width of specific heat peak initially decease, and then remain nearly constant. It is shown that the transition broadness is concerned with the changes of the relative magnitudes of the eductions of nonstickers and solvents from micellar cores.Comment: 8 pages, 4 figure

    Supersolid and charge density-wave states from anisotropic interaction in an optical lattice

    Full text link
    We show anisotropy of the dipole interaction between magnetic atoms or polar molecules can stabilize new quantum phases in an optical lattice. Using a well controlled numerical method based on the tensor network algorithm, we calculate phase diagram of the resultant effective Hamiltonian in a two-dimensional square lattice - an anisotropic Hubbard model of hard-core bosons with attractive interaction in one direction and repulsive interaction in the other direction. Besides the conventional superfluid and the Mott insulator states, we find the striped and the checkerboard charge density wave states and the supersolid phase that interconnect the superfluid and the striped solid states. The transition to the supersolid phase has a mechanism different from the case of the soft-core Bose Hubbard model.Comment: 5 pages, 5 figures

    Direct solar-pumped iodine laser amplifier

    Get PDF
    In order to evaluate the feasibility of the solar pumped dye laser, the parametric study of a dye laser amplifier pumped by a solar simulator and flashlamp was carried out, and the amplifier gains were measured at various pump beam irradiances on the dye cell. Rhodamine 6G was considered as a candidate for the solar pumped laser because of its good utilization of the solar spectrum and high quantum efficiency. The measurement shows that a solar concentration of 20,000 is required to reach the threshold of the dye. The work to construct a kinetic model algorithm which predicts the output parameter of laser was progressed. The kinetic model was improved such that there is good agreement between the theoretical model and experimental data for the systems defined previously as flashlamp pumped laser oscillator, and the long path length solar pumped laser

    Direct solar-pumped iodine laser amplifier

    Get PDF
    The improvement on the collection system of the Tarmarack Solar Simulator beam was attemped. The basic study of evaluating the solid state laser materials for the solar pumping and also the work to construct a kinetic model algorithm for the flashlamp pumped iodine lasers were carried out. It was observed that the collector cone worked better than the lens assembly in order to collect the solar simulator beam and to focus it down to a strong power density. The study on the various laser materials and their lasing characteristics shows that the neodymium and chromium co-doped gadolinium scandium gallium garnet (Nr:Cr:GSGG) may be a strong candidate for the high power solar pumped solid state laser crystal. On the other hand the improved kinetic modeling for the flashlamp pumped iodine laser provides a good agreement between the theoretical model and the experimental data on the laser power output, and predicts the output parameters of a solar pumped iodine laser

    Cross-Layer Peer-to-Peer Track Identification and Optimization Based on Active Networking

    Get PDF
    P2P applications appear to emerge as ultimate killer applications due to their ability to construct highly dynamic overlay topologies with rapidly-varying and unpredictable traffic dynamics, which can constitute a serious challenge even for significantly over-provisioned IP networks. As a result, ISPs are facing new, severe network management problems that are not guaranteed to be addressed by statically deployed network engineering mechanisms. As a first step to a more complete solution to these problems, this paper proposes a P2P measurement, identification and optimisation architecture, designed to cope with the dynamicity and unpredictability of existing, well-known and future, unknown P2P systems. The purpose of this architecture is to provide to the ISPs an effective and scalable approach to control and optimise the traffic produced by P2P applications in their networks. This can be achieved through a combination of different application and network-level programmable techniques, leading to a crosslayer identification and optimisation process. These techniques can be applied using Active Networking platforms, which are able to quickly and easily deploy architectural components on demand. This flexibility of the optimisation architecture is essential to address the rapid development of new P2P protocols and the variation of known protocols

    A Sino-German 6cm polarisation survey of the Galactic plane - VIII. Small-diameter sources

    Full text link
    Information of small-diameter sources is extracted from the Sino-German 6cm polarisation survey of the Galactic plane carried out with the Urumqi 25-m telescope. We performed two-dimensional elliptical Gaussian fits to the 6cm maps to obtain a list of sources with total-intensity and polarised flux densities. The source list contains 3832 sources with a fitted diameter smaller than 16 arcmin and a peak flux density exceeding 30 mJy, so about 5 times the rms noise, of the total-intensity data. The cumulative source count indicates completeness for flux densities exceeding about 60 mJy. We identify 125 linearly polarised sources at 6cm with a peak polarisation flux density greater than 10 mJy, so about 3 times the rms noise, of the polarised-intensity data. Despite lacking compact steep spectrum sources, the 6cm catalogue lists about 20 percent more sources than the Effelsberg 21cm source catalogue at the same angular resolution and for the same area. Most of the faint 6cm sources must have a flat spectrum and are either HII regions or extragalactic. When compared with the Green Bank 6cm (GB6) catalogue, we obtain higher flux densities for a number of extended sources with complex structures. Polarised 6cm sources density are uniformly distributed in Galactic latitude. Their number density decreases towards the inner Galaxy. More than 80 percent of the polarised sources are most likely extragalactic. With a few exceptions, the sources have a higher percentage polarisation at 6cm than at 21cm. Depolarisation seems to occur mostly within the sources with a minor contribution from the Galactic foreground emission.Comment: A&A accepted, 9 pages, 5 figures, Tables 1 and 2 are accessible from http://zmtt.bao.ac.cn/6cm
    corecore