Method accurately measures mean particle diameters of monodisperse polystyrene latexes

Photomicrographic method determines mean particle diameters of monodisperse polystyrene latexes. Many diameters are measured simultaneously by measuring row lengths of particles in a triangular array at a glass-oil interface. The method provides size standards for electronic particle counters and prevents distortions, softening, and flattening

Internal and ancestral controls of cell-generation times

Lateral and longitudinal correlations between related cells reveal associations between the generation times of cells for an intermediate period /three generations in bacteral cultures/. Generation times of progeny are influenced by nongenetic factors transmitted from their ancestors

Confinement of knotted polymers in a slit

We investigate the effect of knot type on the properties of a ring polymer confined to a slit. For relatively wide slits, the more complex the knot, the more the force exerted by the polymer on the walls is decreased compared to an unknotted polymer of the same length. For more narrow slits the opposite is true. The crossover between these two regimes is, to first order, at smaller slit width for more complex knots. However, knot topology can affect these trends in subtle ways. Besides the force exerted by the polymers, we also study other quantities such as the monomer-density distribution across the slit and the anisotropic radius of gyration.Comment: 9 pages, 6 figures, submitted for publicatio

GLAS Spacecraft Pointing Study

Science requirements for the GLAS mission demand that the laser altimeter be pointed to within 50 m of the location of the previous repeat ground track. The satellite will be flown in a repeat orbit of 182 days. Operationally, the required pointing information will be determined on the ground using the nominal ground track, to which pointing is desired, and the current propagated orbit of the satellite as inputs to the roll computation algorithm developed by CCAR. The roll profile will be used to generate a set of fit coefficients which can be uploaded on a daily basis and used by the on-board attitude control system. In addition, an algorithm has been developed for computation of the associated command quaternions which will be necessary when pointing at targets of opportunity. It may be desirable in the future to perform the roll calculation in an autonomous real-time mode on-board the spacecraft. GPS can provide near real-time tracking of the satellite, and the nominal ground track can be stored in the on-board computer. It will be necessary to choose the spacing of this nominal ground track to meet storage requirements in the on-board environment. Several methods for generating the roll profile from a sparse reference ground track are presented

Caracterização de produtores de leite orgânico e em transição agroecológica do Distrito Federal e Regiões Integradas do entorno - Brasil.

Foi elaborada uma pesquisa de campo utilizando o instrumento de diagnóstico rápido participativo-DRP, desenvolvido para colher informações relacionadas a produção de leite orgânico e em transição agroecológica a fim de caracterizar unidades familiares na região do Distrito Federal e integrada do entorno (DF-RIDE), Brasil. Com estas ações foi possível mapear os produtores na atividade, como também identificar gargalos da produção a partir dos índices estimados, e relacioná-los com a importância da conservação das pastagens por meio de parâmetros econômicos e técnicos das unidades produtivas da região enfatizando e relacionando-as com o manejo de pastagens agroecológicas nesses sistemas de produção. O instrumento utilizado auxiliou o produtor de leite a melhor observar suas atividades técnicas e econômicas, promovendo melhorias na gestão da propriedade. Foi possível ainda construir de forma participativa, métodos alternativos para melhorar o manejo de pastagens. Abstract: Was elaborate field research using the instrument of participatory rapid diagnosis-DRP, developed to gather information related to organic milk production and agroecological transition and characterize family units in the Federal District and surroundings integrated region (DF-RIDE), Brazil. With these actions was possible to map producers in activity, as well as identify bottlenecks of production from the estimated indices, and relates them with the importance of the pastures conservation, through economic and technical parameters of the productive units in the region emphasizing and relating it to the management of pastures in agroecological production systems. The instrument used assisted the milk producer to better observe their technical and economic activities, promoting improvements in the management of the property. It was still possible to build in a participative manner, alternative methods to improve pasture management

Condition-Dependent Cell Volume and Concentration of Escherichia coli to Facilitate Data Conversion for Systems Biology Modeling

Systems biology modeling typically requires quantitative experimental data such as intracellular concentrations or copy numbers per cell. In order to convert population-averaging omics measurement data to intracellular concentrations or cellular copy numbers, the total cell volume and number of cells in a sample need to be known. Unfortunately, even for the often studied model bacterium Escherichia coli this information is hardly available and furthermore, certain measures (e.g. cell volume) are also dependent on the growth condition. In this work, we have determined these basic data for E. coli cells when grown in 22 different conditions so that respective data conversions can be done correctly. First, we determine growth-rate dependent cell volumes. Second, we show that in a 1 ml E. coli sample at an optical density (600 nm) of 1 the total cell volume is around 3.6 µl for all conditions tested. Third, we demonstrate that the cell number in a sample can be determined on the basis of the sample's optical density and the cells' growth rate. The data presented will allow for conversion of E. coli measurement data normalized to optical density into volumetric cellular concentrations and copy numbers per cell - two important parameters for systems biology model development

The time-profile of cell growth in fission yeast: model selection criteria favoring bilinear models over exponential ones

BACKGROUND: There is considerable controversy concerning the exact growth profile of size parameters during the cell cycle. Linear, exponential and bilinear models are commonly considered, and the same model may not apply for all species. Selection of the most adequate model to describe a given data-set requires the use of quantitative model selection criteria, such as the partial (sequential) F-test, the Akaike information criterion and the Schwarz Bayesian information criterion, which are suitable for comparing differently parameterized models in terms of the quality and robustness of the fit but have not yet been used in cell growth-profile studies. RESULTS: Length increase data from representative individual fission yeast (Schizosaccharomyces pombe) cells measured on time-lapse films have been reanalyzed using these model selection criteria. To fit the data, an extended version of a recently introduced linearized biexponential (LinBiExp) model was developed, which makes possible a smooth, continuously differentiable transition between two linear segments and, hence, allows fully parametrized bilinear fittings. Despite relatively small differences, essentially all the quantitative selection criteria considered here indicated that the bilinear model was somewhat more adequate than the exponential model for fitting these fission yeast data. CONCLUSION: A general quantitative framework was introduced to judge the adequacy of bilinear versus exponential models in the description of growth time-profiles. For single cell growth, because of the relatively limited data-range, the statistical evidence is not strong enough to favor one model clearly over the other and to settle the bilinear versus exponential dispute. Nevertheless, for the present individual cell growth data for fission yeast, the bilinear model seems more adequate according to all metrics, especially in the case of wee1Δ cells

A Feedback Quenched Oscillator Produces Turing Patterning with One Diffuser

Efforts to engineer synthetic gene networks that spontaneously produce patterning in multicellular ensembles have focused on Turing's original model and the “activator-inhibitor” models of Meinhardt and Gierer. Systems based on this model are notoriously difficult to engineer. We present the first demonstration that Turing pattern formation can arise in a new family of oscillator-driven gene network topologies, specifically when a second feedback loop is introduced which quenches oscillations and incorporates a diffusible molecule. We provide an analysis of the system that predicts the range of kinetic parameters over which patterning should emerge and demonstrate the system's viability using stochastic simulations of a field of cells using realistic parameters. The primary goal of this paper is to provide a circuit architecture which can be implemented with relative ease by practitioners and which could serve as a model system for pattern generation in synthetic multicellular systems. Given the wide range of oscillatory circuits in natural systems, our system supports the tantalizing possibility that Turing pattern formation in natural multicellular systems can arise from oscillator-driven mechanisms

Intracellular Water Exchange for Measuring the Dry Mass, Water Mass and Changes in Chemical Composition of Living Cells

We present a method for direct non-optical quantification of dry mass, dry density and water mass of single living cells in suspension. Dry mass and dry density are obtained simultaneously by measuring a cell’s buoyant mass sequentially in an H[subscript 2]O-based fluid and a D[subscript 2]O-based fluid. Rapid exchange of intracellular H[subscript 2]O for D[subscript 2]O renders the cell’s water content neutrally buoyant in both measurements, and thus the paired measurements yield the mass and density of the cell’s dry material alone. Utilizing this same property of rapid water exchange, we also demonstrate the quantification of intracellular water mass. In a population of E. coli, we paired these measurements to estimate the percent dry weight by mass and volume. We then focused on cellular dry density – the average density of all cellular biomolecules, weighted by their relative abundances. Given that densities vary across biomolecule types (RNA, DNA, protein), we investigated whether we could detect changes in biomolecular composition in bacteria, fungi, and mammalian cells. In E. coli, and S. cerevisiae, dry density increases from stationary to exponential phase, consistent with previously known increases in the RNA/protein ratio from up-regulated ribosome production. For mammalian cells, changes in growth conditions cause substantial shifts in dry density, suggesting concurrent changes in the protein, nucleic acid and lipid content of the cell.National Cancer Institute (U.S.). Physical Sciences-Oncology Center (U54CA143874)National Institutes of Health (U.S.) (Center for Cell Division Process Grant P50GM6876)National Institutes of Health (U.S.) (Contract R01CA170592)United States. Army Research Office (Institute for Collaborate Biotechnologies Contract W911NF-09-D-0001