Networking Cities after Paris: Weighing the Ambition of Urban Climate Change Experimentation

Over the past few decades, cities have repeatedly demonstrated high levels of ambition with regard to climate action. Global environmental governance has been marked by a proliferation of policy actions taken by local governments around the world to demonstrate their potential to advance climate change mitigation and adaptation. Leading ‘by example’ and demonstrating the extent of action that it is possible to deliver, cities have aspired to raise the ambition of national and international climate governance and put action into practice via a growing number of ‘climate change experiments’ delivered on the ground. Yet accounts of the potential of cities in global environmental governance have often stopped short of a systematic valuation of the nature and impact of the networked dimension of this action. This article addresses this by assessing the nature, and challenges faced by, urban climate governance in the post-Paris era, focusing on the ‘experimentation’ undertaken in cities and the city networks shaping this type of governance. First, we unpack the concept of ‘urban climate change experimentation’, the ways in which it is networked, and the forces driving it. In the second and third parts of the article, we discuss two main pitfalls of networked urban experimentation in its current form, focusing on issues of scaling experiments and the nature of experimentation. We call for increased attention to ‘scaling up’ experiments beyond urban levels of governance, and to transformative experimentation with governance and politics by and in cities. Finally, we consider how these pitfalls allow us to weigh the potential of urban climate ambition, and consider the pathways available for supporting urban climate change experimentation

Emission fluxes and atmospheric degradation of monoterpenes above a boreal forest: field measurements and modelling

The contribution of monoterpenes to aerosol formation processes within and above forests is not well understood. This is also true for the particle formation events observed during the BIOFOR campaigns in Hyytiälä, Finland. Therefore, the diurnal variation of the concentrations of several biogenic volatile organic compounds (BVOCs) and selected oxidation products in the gas and particle phase were measured on selected days during the campaigns in Hyytiälä, Finland. α-pinene and Δ3-carene were found to represent the most important monoterpenes above the boreal forest. A clear vertical gradient of their concentrations was observed together with a change of the relative monoterpene composition with height. Based on concentration profile measurements of monoterpenes, their fluxes above the forest canopy were calculated using the gradient approach. Most of the time, the BVOC fluxes show a clear diurnal variation with a maximum around noon. The highest fluxes were observed for α-pinene with values up to 20 ng m−2 s−1 in summer time and almost 100 ng m−2 s−1 during the spring campaign. Furthermore, the main oxidation products from α-pinene, pinonaldehyde, and from β-pinene, nopinone, were detected in the atmosphere above the forest. In addition to these more volatile oxidation products, pinic and pinonic acid were identified in the particle phase in a concentration range between 1 and 4 ng m−3. Beside these direct measurement of known oxidation products, the chemical sink term in the flux calculations was used to estimate the amount of product formation of the major terpenes (α-pinene, β-pinene, Δ3-carene). A production rate of very low volatile oxidation products (e.g., multifunctional carboxylic) from ·OH- and O3-reaction of monoterpenes of about 1.3·104 molecules cm−3 s−1 was estimated for daylight conditions during summer time. Additionally, model calculations with the one-dimensional multilayer model CACHE were carried out to investigate the diurnal course of BVOC fluxes and chemical degradation of terpenes

Evaluation of urban local-scale aerodynamic parameters: implications for the vertical profile of wind speed and for source areas

Nine methods to determine local-scale aerodynamic roughness length (z0) and zero-plane displacement (zd) are compared at three sites (within 60 m of each other) in London, UK. Methods include three anemometric (single-level high frequency observations), six morphometric (surface geometry) and one reference-based approach (look-up tables). A footprint model is used with the morphometric methods in an iterative procedure. The results are insensitive to the initial zd and z0 estimates. Across the three sites, zd varies between 5 – 45 m depending upon the method used. Morphometric methods that incorporate roughness-element height variability agree better with anemometric methods, indicating zd is consistently greater than the local mean building height. Depending upon method and wind direction, z0 varies between 0.1 and 5 m with morphometric z0 consistently being 2 – 3 m larger than the anemometric z0. No morphometric method consistently resembles the anemometric methods. Wind-speed profiles observed with Doppler lidar provide additional data with which to assess the methods. Locally determined roughness parameters are used to extrapolate wind-speed profiles to a height roughly 200 m above the canopy. Wind-speed profiles extrapolated based on morphometric methods that account for roughness-element height variability are most similar to observations. The extent of the modelled source area for measurements varies by up to a factor of three, depending upon the morphometric method used to determine zd and z0

Global Intermittency and Collapsing Turbulence in the Stratified Planetary Boundary Layer

Direct numerical simulation of the turbulent Ekman layer over a smooth wall is used to investigate bulk properties of a planetary boundary layer under stable stratification. Our simplified configuration depends on two non-dimensional parameters: a Richardson number characterizing the stratification and a Reynolds number characterizing the turbulence scale separation. This simplified configuration is sufficient to reproduce global intermittency, a turbulence collapse, and the decoupling of the surface from the outer region of the boundary layer. Global intermittency appears even in the absence of local perturbations at the surface; the only requirement is that large-scale structures several times wider than the boundary-layer height have enough space to develop. Analysis of the mean velocity, turbulence kinetic energy, and external intermittency is used to investigate the large-scale structures and corresponding differences between stably stratified Ekman flow and channel flow. Both configurations show a similar transition to the turbulence collapse, overshoot of turbulence kinetic energy, and spectral properties. Differences in the outer region resulting from the rotation of the system lead, however, to the generation of enstrophy in the non-turbulent patches of the Ekman flow. The coefficient of the stability correction function from Monin-Obukhov similarity theory is estimated as (Formula presented.) in agreement with atmospheric observations, theoretical considerations, and results from stably stratified channel flows. Our results demonstrate the applicability of this set-up to atmospheric problems despite the intermediate Reynolds number achieved in our simulations. © 2014 The Author(s)

Phosphoinositide-binding interface proteins involved in shaping cell membranes

The mechanism by which cell and cell membrane shapes are created has long been a subject of great interest. Among the phosphoinositide-binding proteins, a group of proteins that can change the shape of membranes, in addition to the phosphoinositide-binding ability, has been found. These proteins, which contain membrane-deforming domains such as the BAR, EFC/F-BAR, and the IMD/I-BAR domains, led to inward-invaginated tubes or outward protrusions of the membrane, resulting in a variety of membrane shapes. Furthermore, these proteins not only bind to phosphoinositide, but also to the N-WASP/WAVE complex and the actin polymerization machinery, which generates a driving force to shape the membranes

The Critical Richardson Number and Limits of Applicability of Local Similarity Theory in the Stable Boundary Layer

Measurements of atmospheric turbulence made over the Arctic pack ice during the Surface Heat Budget of the Arctic Ocean experiment (SHEBA) are used to determine the limits of applicability of Monin-Obukhov similarity theory (in the local scaling formulation) in the stable atmospheric boundary layer. Based on the spectral analysis of wind velocity and air temperature fluctuations, it is shown that, when both of the gradient Richardson number, Ri, and the flux Richardson number, Rf, exceed a 'critical value' of about 0.20 - 0.25, the inertial subrange associated with the Richardson-Kolmogorov cascade dies out and vertical turbulent fluxes become small. Some small-scale turbulence survives even in this supercritical regime, but this is non-Kolmogorov turbulence, and it decays rapidly with further increasing stability. Similarity theory is based on the turbulent fluxes in the high-frequency part of the spectra that are associated with energy-containing/flux-carrying eddies. Spectral densities in this high-frequency band diminish as the Richardson-Kolmogorov energy cascade weakens; therefore, the applicability of local Monin-Obukhov similarity theory in stable conditions is limited by the inequalities Ri < Ri_cr and Rf < Rf_cr. However, it is found that Rf_cr = 0.20 - 0.25 is a primary threshold for applicability. Applying this prerequisite shows that the data follow classical Monin-Obukhov local z-less predictions after the irrelevant cases (turbulence without the Richardson-Kolmogorov cascade) have been filtered out.Comment: Boundary-Layer Meteorology (Manuscript submitted: 16 February 2012; Accepted: 10 September 2012

Understanding interactions in face-to-face and remote undergraduate science laboratories

This paper reviews the ways in which interactions have been studied, and the findings of such studies, in science education in both face-to-face and remote laboratories. Guided by a systematic selection process, 27 directly relevant articles were analysed based on three categories: the instruments used for measuring interactions, the research findings on student interactions, and the theoretical frameworks used in the studies of student interactions. In face-to-face laboratories, instruments for measuring interactions and the characterisation of the nature of interactions were prominent. For remote laboratories, the analysis of direct interactions was found to be lacking. Instead, studies of remote laboratories were mainly concerned with their practical scope. In addition, it is found that only a limited number of theoretical frameworks have been developed and applied in the research design. Existent theories are summarised and possible theoretical frameworks that may be implemented in studies of interactions in undergraduate laboratories are proposed. Finally, future directions for research on the interrelationship between student interactions and laboratory learning are suggested