25 research outputs found
Meta-analysis of viscosity of aqueous deep eutectic solvents and their components
Deep eutectic solvents (DES) formed by quaternary ammonium salts and hydrogen bond donors are a promising green alternative to organic solvents. Their high viscosity at ambient temperatures can limit biocatalytic applications and therefore requires fine-tuning by adjusting water content and temperature. Here, we performed a meta-analysis of the impact of water content and temperature on the viscosities of four deep eutectic solvents (glyceline, reline, N,N-diethylethanol ammonium chloride-glycerol, N,N-diethylethanol ammonium chloride-ethylene glycol), their components (choline chloride, urea, glycerol, ethylene glycol), methanol, and pure water. We analyzed the viscosity data by an automated workflow, using Arrhenius and Vogel-Fulcher-Tammann-Hesse models. The consistency and completeness of experimental data and metadata was used as an essential criterion of data quality. We found that viscosities were reported for different temperature ranges, half the time without specifying a method of desiccation, and in almost half of the reports without specifying experimental errors. We found that the viscosity of the pure components varied widely, but that all aqueous mixtures (except for reline) have similar excess activation energy of viscous flow E-eta(excess)= 3-5 kJ/mol, whereas reline had a negative excess activation energy (E-eta(excess)= - 19 kJ/mol). The data and workflows used are accessible at https://doi.org/10.15490/FAIRDOMHUB.1.STUDY.767.1
The ins and outs of vanillyl alcohol oxidase: Identification of ligand migration paths
Vanillyl alcohol oxidase (VAO) is a homo-octameric flavoenzyme belonging to the VAO/PCMH family. Each VAO subunit consists of two domains, the FAD-binding and the cap domain. VAO catalyses, among other reactions, the two-step conversion of p-creosol (2-methoxy-4-methylphenol) to vanillin (4-hydroxy-3-methoxybenzaldehyde). To elucidate how different ligands enter and exit the secluded active site, Monte Carlo based simulations have been performed. One entry/exit path via the subunit interface and two additional exit paths have been identified for phenolic ligands, all leading to the si side of FAD. We argue that the entry/exit path is the most probable route for these ligands. A fourth path leading to the re side of FAD has been found for the co-ligands dioxygen and hydrogen peroxide. Based on binding energies and on the behaviour of ligands in these four paths, we propose a sequence of events for ligand and co-ligand migration during catalysis. We have also identified two residues, His466 and Tyr503, which could act as concierges of the active site for phenolic ligands, as well as two other residues, Tyr51 and Tyr408, which could act as a gateway to the re side of FAD for dioxygen. Most of the residues in the four paths are also present in VAO’s closest relatives, eugenol oxidase and p-cresol methylhydroxylase. Key path residues show movements in our simulations that correspond well to conformations observed in crystal structures of these enzymes. Preservation of other path residues can be linked to the electron acceptor specificity and oligomerisation state of the three enzymes. This study is the first comprehensive overview of ligand and co-ligand migration in a member of the VAO/PCMH family, and provides a proof of concept for the use of an unbiased method to sample this process.Enzymes are bionanomachines, which speed up chemical reactions in organisms. To understand how they achieve that, we need to study their mechanisms. Computational enzymology can show us what happens in the enzyme’s active site during a reaction. But molecules need first to reach the active site before a reaction can start. The process of substrate entry and product exit to the active site is often neglected when studying enzymes. However, these two events are of fundamental importance to the proper functioning of any enzyme. We are interested in these dynamic processes to complete our understanding of the mode of action of enzymes. In our work, we have studied substrate and product migration in vanillyl alcohol oxidase. This enzyme can produce the flavour vanillin and enantiopure alcohols, but also catalyses other reactions. The named products are of interest to the flavour- and fine-chemical industries.This work was supported by: FP7-KBBE-
2013-7-613549 http://cordis.europa.eu/
programme/rcn/851_en.html (see INDOX project (http://indoxproject.eu), funding received by: GG MFL VG WJHvB; and CTQ2016-79138-R, http://
www.mineco.gob.es/portal/site/mineco/?lang_
choosen=en, funding received by: MFL VG. The funders had no role in study design, data collection and analysis, decision to publish, or preparation of the manuscript.Peer ReviewedPostprint (published version
On the origin of vanillyl alcohol oxidases
Vanillyl alcohol oxidase (VAO) is a fungal flavoenzyme that converts a wide range of para-substituted phenols. The products of these conversions, e.g. vanillin, coniferyl alcohol and chiral aryl alcohols, are of interest for several industries. VAO is the only known fungal member of the 4-phenol oxidising (4PO) subgroup of the VAO/PCMH flavoprotein family. While the enzyme has been biochemically characterised in great detail, little is known about its physiological role and distribution in fungi. We have identified and analysed novel, fungal candidate VAOs and found them to be mostly present in Pezizomycotina and Agaricomycotina. The VAOs group into three clades, of which two clades do not have any characterised member. Interestingly, bacterial relatives of VAO do not form a single outgroup, but rather split up into two separate clades. We have analysed the distribution of candidate VAOs in fungi, as well as their genomic environment. VAOs are present in low frequency in species of varying degrees of relatedness and in regions of low synteny. These findings suggest that fungal VAOs may have originated from bacterial ancestors, obtained by fungi through horizontal gene transfer. Because the overall conservation of fungal VAOs varies between 60 and 30% sequence identity, we argue for a more reliable functional prediction using critical amino acid residues. We have defined a sequence motif P-x-x-x-x-S-x-G-[RK]-N-x-G-Y-G-[GS] that specifically recognizes 4PO enzymes of the VAO/PCMH family, as well as additional motifs that can help to further narrow down putative functions. We also provide an overview of fingerprint residues that are specific to VAOs
Real‐Time NMR Monitoring of Spatially Segregated Enzymatic Reactions in Multilayered Hydrogel Assemblies**
Compartmentalized chemical reactions at the microscale are important in biotechnology, yet monitoring the molecular content at these small scales is challenging. To address this challenge, we integrate a compact, reconfigurable reaction cell featuring electrochemical functionality with high-resolution NMR spectroscopy. We demonstrate the operation of this system by monitoring the activity of enzymes immobilized in chemically distinct layers within a multi-layered chitosan hydrogel assembly. As a benchmark, we observed the parallel activities of urease (Urs), catalase (Cat), and glucose oxidase (GOx) by monitoring reagent and product concentrations in real-time. Simultaneous monitoring of an independent enzymatic process (Urs) together with a cooperative process (GOx + Cat) was achieved, with chemical conversion modulation of the GOx + Cat process demonstrated by varying the order in which the hydrogel was assembled
A kaleidoscopic look at vanillyl alcohol oxidase
Vanillyl alcohol oxidase can make vanillin, the major flavour component of vanilla. We have studied this enzyme in great detail to better understand how it works and how exactly it produces vanillin. We have identified two different paths that guide substrates to where the reaction takes place. Once there, some substrates form an adduct, preventing product formation. Based on our work, we predict that the size of the substrate determines if the adduct is formed, and that one amino acid in the active centre of the enzyme is crucial for this process. Our work will help other researchers to improve this enzyme so that it can make vanillin more efficiently
Toward Reproducible Enzyme Modeling with Isothermal Titration Calorimetry
To apply enzymes in technical processes, a detailed understanding of the molecular mechanisms is required. Kinetic and thermodynamic parameters of enzyme catalysis are crucial to plan, model, and implement biocatalytic processes more efficiently. While the kinetic parameters, Km and kcat, are often accessible by optical methods, the determination of thermodynamic parameters requires more sophisticated methods. Isothermal titration calorimetry (ITC) allows the label-free and highly sensitive analysis of kinetic and thermodynamic parameters of individual steps in the catalytic cycle of an enzyme reaction. However, since ITC is susceptible to interferences due to denaturation or agglomeration of the enzymes, the homogeneity of the enzyme sample must always be considered, and this can be accomplished by means of dynamic light scattering (DLS) analysis. We here report on the use of an ITC-dependent work flow to determine both the kinetic and the thermodynamic data for a cofactor-dependent enzyme. Using a standardized approach with the implementation of sample quality control by DLS, we obtain high-quality data suitable for the advanced modeling of the enzyme reaction mechanism. Specifically, we investigated stereoselective reactions catalyzed by the NADPH-dependent ketoreductase Gre2p under different reaction conditions. The results revealed that this enzyme operates with an ordered sequential mechanism and is affected by substrate or product inhibition depending on the reaction buffer. Data reproducibility is ensured by specifying standard operating procedures, using programmed workflows for data analysis, and storing all data in a F.A.I.R. (findable, accessible, interoperable, and reusable) repository (https://doi.org/10.15490/fairdomhub.1.investigation.464.1). Our work highlights the utility for combined binding and kinetic studies for such complex multisubstrate reactions
Correction to Analysis of Thermophysical Properties of Deep Eutectic Solvents by Data Integration
A single loop is essential for the octamerization of vanillyl alcohol oxidase
The VAO/PCMH family of flavoenzymes is a family of structurally related proteins that catalyse a wide range of oxidation reactions. It contains a subfamily of enzymes that catalyse the oxidation of para-substituted phenols using covalently bound FAD cofactors (the 4PO subfamily). This subfamily is composed of two oxidases, vanillyl alcohol oxidase (VAO) and eugenol oxidase (EUGO), and two flavocytochrome dehydrogenases, para-cresol methylhydroxylase (PCMH) and eugenol hydroxylase (EUGH). Although they catalyse similar reactions, these enzymes differ in terms of their electron acceptor preference and oligomerization state. For example, VAO forms homo-octamers that can be described as tetramers of stable dimers, whereas EUGO is exclusively dimeric in solution. A possible explanation for this difference is the presence of a loop at the dimer–dimer interface in VAO that is not present in EUGO. Here, the role played by this loop in determining the quaternary structure of these enzymes is investigated. A VAO variant where the loop was deleted, loopless VAO, exclusively formed dimers. However, introduction of the loop into EUGO was not sufficient to induce its octamerization. Neither variant displayed major changes in its catalytic properties as compared to the wild-type enzyme. Bioinformatic analysis revealed that the presence of the loop is conserved within putative fungal oxidases of the 4PO subgroup, but it is never found in putative bacterial oxidases or dehydrogenases. Our results shed light on the molecular mechanism of homo-oligomerization of VAO and the importance of oligomerization for its enzymatic function. Enzymes: p-cresol methylhydroxylase (4-methylphenol:acceptor oxidoreductase (methyl-hydroxylating), EC 1.17.99.1); vanillyl alcohol oxidase (vanillyl alcohol:oxygen oxidoreductase, EC 1.1.3.38).</p
On the origin of vanillyl alcohol oxidases
Vanillyl alcohol oxidase (VAO) is a fungal flavoenzyme that converts a wide range of para-substituted phenols. The products of these conversions, e.g. vanillin, coniferyl alcohol and chiral aryl alcohols, are of interest for several industries. VAO is the only known fungal member of the 4-phenol oxidising (4PO) subgroup of the VAO/PCMH flavoprotein family. While the enzyme has been biochemically characterised in great detail, little is known about its physiological role and distribution in fungi. We have identified and analysed novel, fungal candidate VAOs and found them to be mostly present in Pezizomycotina and Agaricomycotina. The VAOs group into three clades, of which two clades do not have any characterised member. Interestingly, bacterial relatives of VAO do not form a single outgroup, but rather split up into two separate clades. We have analysed the distribution of candidate VAOs in fungi, as well as their genomic environment. VAOs are present in low frequency in species of varying degrees of relatedness and in regions of low synteny. These findings suggest that fungal VAOs may have originated from bacterial ancestors, obtained by fungi through horizontal gene transfer. Because the overall conservation of fungal VAOs varies between 60 and 30% sequence identity, we argue for a more reliable functional prediction using critical amino acid residues. We have defined a sequence motif P-x-x-x-x-S-x-G-[RK]-N-x-G-Y-G-[GS] that specifically recognizes 4PO enzymes of the VAO/PCMH family, as well as additional motifs that can help to further narrow down putative functions. We also provide an overview of fingerprint residues that are specific to VAOs
Towards Reproducible Enzyme Modeling with Isothermal Titration Calorimetry
An experimental workflow to provide detailed information of the
molecular mechanisms of enzymes is described. This workflow will help in
the application of enzymes in technical processes by providing crucial
parameters needed to plan, model and implement biocatalytic processes
more efficiently. These parameters are homogeneity of the enzyme sample
(HES), kinetic and thermodynamic parameters of enzyme kinetics and
binding of reactants to enzymes. The techniques used to measure these
properties are dynamic light scattering (DLS), UV-Vis spectrophotometry
and isothermal titration calorimetry (ITC) respectively. The workflow is
standardized by the use of SOPs and python-scripted data analysis.
We have used the NADPH-dependent alcohol dehydrogenase Gre2p as a
challenging enzyme to demonstrate the power of this workflow. Our work
highlights the utility for combined binding and kinetic studies for such
complex multi-substrate reactions and the importance of sample quality
control during experiments.
</div