1,048 research outputs found

    Low power probabilistic online monitoring of systematic erroneous behaviour

    Get PDF
    Electronic devices with power-constrained embedded systems are used for a variety of IoT applications, such as geo-monitoring, parking sensors and surveillance, which may tolerate few errors and may not be constrained by a strict error detection latency requirement. In this poster, we propose a novel low power online error monitoring technique that produces an alarm signal when systematic erroneous behaviour has occurred over a pre-defined time interval. A monitoring architecture monitors the signal probabilities of the logic cones concurrently to its normal operation and compares them on-chip against the signature of error-free behaviour. Results on a set of the EPFL'15 benchmarks show an average error coverage of 82.9%% of errors induced by stuck-at faults, with an average area cost of 1.2% and an error detection latency of [0.01, 3.3] milliseconds

    Low power probabilistic online monitoring of systematic erroneous behaviour

    Get PDF
    Electronic devices with power-constrained embedded systems are used for a variety of IoT applications, such as geo-monitoring, parking sensors and surveillance, which may tolerate few errors and may not be constrained by a strict error detection latency requirement. In this poster, we propose a novel low power online error monitoring technique that produces an alarm signal when systematic erroneous behaviour has occurred over a pre-defined time interval. A monitoring architecture monitors the signal probabilities of the logic cones concurrently to its normal operation and compares them on-chip against the signature of error-free behaviour. Results on a set of the EPFL'15 benchmarks show an average error coverage of 82.9%% of errors induced by stuck-at faults, with an average area cost of 1.2% and an error detection latency of [0.01, 3.3] milliseconds

    Susceptible Workload Evaluation and Protection using Selective Fault Tolerance

    Get PDF
    This is an Open Access article distributed under the terms of the Creative Commons Attribution International License CC-BY 4.0 ( http://creativecommons.org/licenses/by/4.0/ ), which permits unrestricted use, distribution, and reproduction in any medium, provided you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made.Low power fault tolerance design techniques trade reliability to reduce the area cost and the power overhead of integrated circuits by protecting only a subset of their workload or their most vulnerable parts. However, in the presence of faults not all workloads are equally susceptible to errors. In this paper, we present a low power fault tolerance design technique that selects and protects the most susceptible workload. We propose to rank the workload susceptibility as the likelihood of any error to bypass the logic masking of the circuit and propagate to its outputs. The susceptible workload is protected by a partial Triple Modular Redundancy (TMR) scheme. We evaluate the proposed technique on timing-independent and timing-dependent errors induced by permanent and transient faults. In comparison with unranked selective fault tolerance approach, we demonstrate a) a similar error coverage with a 39.7% average reduction of the area overhead or b) a 86.9% average error coverage improvement for a similar area overhead. For the same area overhead case, we observe an error coverage improvement of 53.1% and 53.5% against permanent stuck-at and transition faults, respectively, and an average error coverage improvement of 151.8% and 89.0% against timing-dependent and timing-independent transient faults, respectively. Compared to TMR, the proposed technique achieves an area and power overhead reduction of 145.8% to 182.0%.Peer reviewedFinal Published versio

    Discrimination against Mixed-Status Families and its Health Impact on Latino Children

    Get PDF
    Background and Objective: Restrictive immigration policies and discrimination are associated with negative health outcomes for immigrant and Latino families. Mixed-status families represent a unique subpopulation of Latinos affected by restrictive immigration policies. This qualitative study explored discrimination against mixed-status families and its potential health impact on Latino children from the perspective of Latina mothers. Methods: In 2017, twenty in-depth interviews with Latina mothers of mixed-status families living in northwestern North Carolina were conducted, transcribed, and analyzed. Constant comparison, an approach to grounded theory development, was used. Results: Nine themes emerged that reflected experiences with discrimination and its negative impact on children. Themes included more frequent and severe discrimination during and after the 2016 US presidential election, determination to stay together and remain in the US, experiences of discrimination in multiple settings, the impact of discrimination on child health and well-being, the impact of fear and stress on meeting the needs of children, the burden on children serving as liaisons between families and services, the inability of citizenship to protect against the effects of discrimination, positive and hopeful responses to discrimination, and the potential role of education in building a foundation for reducing discrimination (and thus promoting the health and well-being of Latino children) in the future. Conclusions: Discrimination against mixed-status Latino families constitutes a critical threat to the health and well-being of Latino children. Further research should inform immigration policies that support (rather than threaten) the health, well-being, and health care practices that mitigate the stresses experienced by Latino children

    Enrichment of fusobacteria in sea surface oil slicks from the deepwater horizon oil spill

    Get PDF
    The Deepwater Horizon (DWH) oil spill led to rapid microbial community shifts in the Gulf of Mexico, including the formation of unprecedented quantities of marine oil snow (MOS) and of a massive subsurface oil plume. The major taxa that bloomed in sea surface oil slicks during the spill included Cycloclasticus, and to a lesser extent Halomonas, Alteromonas, and Pseudoalteromonas—organisms that grow and degrade oil hydrocarbons aerobically. Here, we show that sea surface oil slicks at DWH contained obligate and facultative anaerobic taxa, including members of the obligate anaerobic phylum Fusobacteria that are commonly found in marine sediment environments. Pyrosequencing analysis revealed that Fusobacteria were strongly selected for when sea surface oil slicks were allowed to develop anaerobically. These organisms have been found in oil-contaminated sediments in the Gulf of Mexico, in deep marine oil reservoirs, and other oil-contaminated sites, suggesting they have putative hydrocarbon-degrading qualities. The occurrence and strong selection for Fusobacteria in a lab-based incubation of a sea surface oil slick sample collected during the spill suggests that these organisms may have become enriched in anaerobic zones of suspended particulates, such as MOS. Whilst the formation and rapid sinking of MOS is recognised as an important mechanism by which a proportion of the Macondo oil had been transported to the sea floor, its role in potentially transporting microorganisms, including oil-degraders, from the upper reaches of the water column to the seafloor should be considered. The presence of Fusobacteria on the sea surface—a highly oxygenated environment—is intriguing, and may be explained by the vertical upsurge of oil that provided a carrier to transport these organisms from anaerobic/micro-aerophilic zones in the oil plume or seabed to the upper reaches of the water column. We also propose that the formation of rapidly-sinking MOS may have re-transported these, and other microbial taxa, to the sediment in the Gulf of Mexico

    The adjusted International Prognostic Index and beta-2-microglobulin predict the outcome after autologous stem cell transplantation in relapsing/refractory peripheral T-cell lymphoma

    Get PDF
    BACKGROUND AND OBJECTIVES: Preliminary data on the use of autologous stem cell transplantation (ASCT) as a salvage therapy for peripheral T-cell lymphoma (PTCL) indicate that the results are similar to those obtained in aggressive B-cell lymphomas. The aim of our study was to analyze outcomes of a large series of patients with PTCL with a prolonged follow-up who received ASCT as salvage therapy. DESIGN AND METHODS: Between 1990 and 2004, 123 patients in this situation were registered in the GELTAMO database. The median age at transplantation was 43.5 years; in 91% of patients the disease was chemosensitive. RESULTS: Seventy-three percent of the patients achieved complete remission, 11% partial remission and the procedure failed in 16%. At a median follow-up of 61 months, the 5-year overall and progression-free survival rates were 45% and 34%, respectively. The presence of more than one factor of the adjusted International Prognostic Index (a-IPI) and a high beta2-microglobulin at transplantation were identified as adverse prognostic factors for both overall and progression-free survival and allowed the population to be stratified into three distinct risk groups. INTERPRETATION AND CONCLUSIONS: Our data show that approximately one third of patients with PTCL in the salvage setting may enjoy prolonged survival following ASCT, provided they are transplanted in a chemosensitive disease state. The a-IPI and beta2-microglobulin level predict the outcome after ASCT in relapsing/refractory PTCL

    Stability of the Scalar Potential and Symmetry Breaking in the Economical 3-3-1 Model

    Get PDF
    A detailed study of the criteria for stability of the scalar potential and the proper electroweak symmetry breaking pattern in the economical 3-3-1 model, is presented. For the analysis we use, and improve, a method previously developed to study the scalar potential in the two-Higgs-doublet extension of the standard model. A new theorem related to the stability of the potential is stated. As a consequence of this study, the consistency of the economical 3-3-1 model emerges.Comment: to be published in EPJ C, 13 page

    Prolonged survival of patients with angioimmunoblastic T-cell lymphoma after high-dose chemotherapy and autologous stem cell transplantation: the GELTAMO experience

    Get PDF
    Abstract OBJECTIVES: Angioimmunoblastic T-cell lymphoma (AIL) is a rare lymphoma with a poor prognosis and no standard treatment. Here, we report our experiences with 19 patients treated with high-dose chemotherapy and autologous stem cell transplantation (HDC/ASCT) within the GELTAMO co-operative group between 1992 and 2004. METHODS: The median age at transplantation was 46 yr. Fifteen patients underwent the procedure as front-line therapy and four patients as salvage therapy. Most patients received peripheral stem cells (90%) coupled with BEAM or BEAC as conditioning regimen (79%). RESULTS: A 79% of patients achieved complete response, 5% partial response and 16% failed the procedure. After a median follow-up of 25 months, eight patients died (seven of progressive disease and secondary neoplasia), while actuarial overall survival and progression-free survival at 3 yr was 60% and 55%. Prognostic factors associated with a poor outcome included bone marrow involvement, transplantation in refractory disease state, attributing more than one factor of the age-adjusted-International Prognostic Index, Pretransplant peripheral T-cell lymphoma (PTCL) Score or Prognostic Index for PTCL. CONCLUSIONS: More than half of the patients with AIL that display unfavourable prognostic factors at diagnosis or relapse would be expected to be alive and disease-free after 3 yr when treated with HDC/ASCT. Patients who are transplanted in a refractory disease state do not benefit from this procedure

    Abnormalities on 1q and 7q are associated with poor outcome in sporadic Burkitt's lymphoma. A cytogenetic and comparative genomic hybridization study

    Get PDF
    Comparative genomic hybridization (CGH) studies have demonstrated a high incidence of chromosomal imbalances in non-Hodgkin's lymphoma. However, the information on the genomic imbalances in Burkitt's Lymphoma (BL) is scanty. Conventional cytogenetics was performed in 34 cases, and long-distance PCR for t(8;14) was performed in 18 cases. A total of 170 changes were present with a median of four changes per case (range 1-22). Gains of chromosomal material (143) were more frequent than amplifications (5) or losses (22). The most frequent aberrations were gains on chromosomes 12q (26%), Xq (22%), 22q (20%), 20q (17%) and 9q (15%). Losses predominantly involved chromosomes 13q (17%) and 4q (9%). High-level amplifications were present in the regions 1q23-31 (three cases), 6p12-p25 and 8p22-p23. Upon comparing BL vs Burkitt's cell leukemia (BCL), the latter had more changes (mean 4.3 +/- 2.2) than BL (mean 2.7 +/- 3.2). In addition, BCL cases showed more frequently gains on 8q, 9q, 14q, 20q, and 20q, 9q, 8q and 14q, as well as losses on 13q and 4q. Concerning outcome, the presence of abnormalities on 1q (ascertained either by cytogenetics or by CGH), and imbalances on 7q (P=0.01) were associated with a short survival

    Catalytic abatement of trichloroethylene over Mo and/or W-based bronzes

    Full text link
    [EN] In this paper we present the results of the synthesis, characterization and catalytic behaviour of Mo(W)¿Nb¿V¿O mixed metal oxides bronzes for the catalytic oxidation of trichloroethylene. The catalysts were prepared hydrothermally with different Mo/W/Nb/V/P atomic ratio and heat-treated at 500 and 700 °C. They were characterized by several techniques as N2-adsorption, X-ray diffraction, FTIR, SEM-EDS, temperature programmed desorption, temperature programmed reduction, UV¿vis, Fourier transformed infrared spectroscopy of adsorbed pyridine and 18O/16O isotope exchange. X-ray diffraction patterns (XRD) of samples heat-treated at 500 °C suggest the presence of a semi-crystalline material with a diffraction peak at ca. 2¿ = 22.2°, while XRD patterns of samples heat-treated at 700 °C show the formation of a tetragonal tungsten bronze (TTB) structure. The activity for the catalytic abatement of trichloroethylene strongly depends on the heat-treatment temperature and the catalyst composition. Thus, samples with W/(Mo + W) atomic ratios of 0.25-0.75 and heat-treated at 500 °C are the most active ones. The enhanced activity has been related to the remarkable higher surface area of the catalyst and to the catalyst composition which influences the acid characteristics as well as the reducibility and reoxidation of the catalysts. The importance of the oxygen dissociation on the catalyst surface and the diffusion of oxygen species through the catalyst are also discussed.The authors wish to thank DGICYT in Spain (Project CTQ2009-14495 and CSD2009-00050-CONSOLIDER/INGENIO 2010) and Universitat Politecnica de Valencia for the financial support. N.B.R. acknowledges Catedra Cemex Sostenibilidad (UPV) for a fellowship. M.D.S. acknowledges Universitat Politecnica de Valencia for a fellowship.Blanch Raga, N.; Soriano Rodríguez, MD.; Palomares Gimeno, AE.; Concepción Heydorn, P.; Martínez Triguero, LJ.; López Nieto, JM. (2013). Catalytic abatement of trichloroethylene over Mo and/or W-based bronzes. Applied Catalysis B: Environmental. 130-131:36-43. https://doi.org/10.1016/j.apcatb.2012.10.016S3643130-13
    corecore