COSMOSOMAS Observations of the CMB and Galactic Foregrounds at 11 GHz: Evidence for anomalous microwave emission at high Galactic Latitude

We present observations with the new 11 GHz radiometer of the COSMOSOMAS experiment at the Teide Observatory (Tenerife). The sky region between 0 deg <= RA <= 360 deg and 26 deg <= DEC 49 deg (ca. 6500 square degrees) was observed with an angular resolution of 0.9 deg. Two orthogonal independent channels in the receiving system measured total power signals from linear polarizations with a 2 GHz bandwidth. Maps with an average sensitivity of 50 microK per beam have been obtained for each channel. At high Galactic latitude (|b|>30deg) the 11 GHz data are found to contain the expected cosmic microwave background as well as extragalactic radiosources, galactic synchrotron and free-free emission, and a dust-correlated component which is very likely of galactic origin. At the angular scales allowed by the window function of the experiment, the dust-correlated component presents an amplitude \Delta T aprox. 9-13 microK while the CMB signal is of order 27 microK. The spectral behaviour of the dust-correlated signal is examined in the light of previous COSMOSOMAS data at 13-17 GHz and WMAP data at 22-94 GHz in the same sky region. We detect a flattening in the spectral index of this signal below 20 GHz which rules out synchrotron radiation as being responsible for the emission. This anomalous dust emission can be described by a combination of free-free emission and spinning dust models with a flux density peaking around 20 GHz.Comment: 17 pages, 10 tables, 20 figures. Details on the COSMOSOMAS experiment can be found at http://www.iac.es/project/cmb/cosmosomas

Anderson Localization in Disordered Vibrating Rods

We study, both experimentally and numerically, the Anderson localization phenomenon in torsional waves of a disordered elastic rod, which consists of a cylinder with randomly spaced notches. We find that the normal-mode wave amplitudes are exponentially localized as occurs in disordered solids. The localization length is measured using these wave amplitudes and it is shown to decrease as a function of frequency. The normal-mode spectrum is also measured as well as computed, so its level statistics can be analyzed. Fitting the nearest-neighbor spacing distribution a level repulsion parameter is defined that also varies with frequency. The localization length can then be expressed as a function of the repulsion parameter. There exists a range in which the localization length is a linear function of the repulsion parameter, which is consistent with Random Matrix Theory. However, at low values of the repulsion parameter the linear dependence does not hold.Comment: 10 pages, 6 figure

Incorporating Digital Tools with Ceramic Crafting: Design and Fabrication of Light Diffusing Screen Shells

This paper investigates the possibilities which arise by incorporating digital tools into the design and fabrication of ceramic building components. In particular, we present how traditional ceramic crafting fabrication methods could be enriched by using parametric, performative and generative design techniques alongside digital fabrication technologies. Considering the growing importance of ceramic components in architectural construction due to their economic and environmentally friendly properties, this paper highlights the findings of design-led research explorations, demonstrating potential innovative solutions and failures arising through a digitalised ‘file to factory’ design approach

Bounds on the dipole moments of the tau-neutrino via the process e+e−→ννˉγe^{+}e^{-}\rightarrow \nu \bar \nu \gamma in a 331 model

We obtain limits on the anomalous magnetic and electric dipole moments of the $\nu_{\tau}$ through the reaction $e^{+}e^{-}\rightarrow \nu \bar \nu \gamma$ and in the framework of a 331 model. We consider initial-state radiation, and neglect $W$ and photon exchange diagrams. The results are based on the data reported by the L3 Collaboration at LEP, and compare favorably with the limits obtained in other models, complementing previous studies on the dipole moments.Comment: 13 pages, 4 figures, to be published in The European Physical J C. arXiv admin note: substantial text overlap with arXiv:hep-ph/060527

New Cosmological Structures on Medium Angular Scales Detected with the Tenerife Experiments

We present observations at 10 and 15 GHz taken with the Tenerife experiments in a band of the sky at Dec.=+35 degrees. These experiments are sensitive to multipoles in the range l=10-30. The sensitivity per beam is 56 and 20 microK for the 10 and the 15 GHz data, respectively. After subtraction of the prediction of known radio-sources, the analysis of the data at 15 GHz at high Galactic latitude shows the presence of a signal with amplitude Delta Trms ~ 32 microK. In the case of a Harrison-Zeldovich spectrum for the primordial fluctuations, a likelihood analysis shows that this signal corresponds to a quadrupole amplitude Q_rms-ps=20.1+7.1-5.4 microK, in agreement with our previous results at Dec.+=40 degrees and with the results of the COBE DMR. There is clear evidence for the presence of individual features in the RA range 190 degrees to 250 degrees with a peak to peak amplitude of ~110 microK. A preliminary comparison between our results and COBE DMR predictions for the Tenerife experiments clearly indicates the presence of individual features common to both. The constancy in amplitude over such a large range in frequency (10-90 GHz) is strongly indicative of an intrinsic cosmological origin for these structures.Comment: ApJ Letters accepted, 13 pages Latex (uses AASTEX) and 4 encapsulated postscript figures

Mobility patterns of the elderly tourist in Algarve

The present work is part of the Project for Scientific Research and Techno-logical Development "Accessibility for All in Tourism" focuses on modal in-terfaces designed according to the concepts of "Universal Design" and "Age Sensitive Design". In this project 851 surveys were carried out for elderly tourists, who arrived in Algarve (Portugal) through the international Airport of Faro, in the summer of 2018, with a view to understanding their prefer-ences and needs in terms of mobility. It presents the characterization of the senior tourist in Algarve, according to: gender, age, academic qualification, situation in the relation to the profession, nationality, disability and/or disa-bilities that affects mobility and the need to use technical aids to move. It analyses and compares, from the point of view of sustainable mobility, the mobility of the elderly tourist, by gender and age group, in the country where they reside and in the Algarve region. This information is useful for local au-thorities and for transport operators in order to make the mobility of elderly tourists, in Algarve, more sustainable from a social, economic and environ-mental standpoint.The Research Project ACCES4ALL - Accessibility for All in Tourisminfo:eu-repo/semantics/publishedVersio

Electromagnetic Forming of Longitudinal Strengthening Ribs in Roll Formed Automotive Profiles

In the automotive industry, increasing ecological concerns and demands for higher performance have become lightweight construction a key aspect. Due to the gradual introduction of high strength materials on the one side, and greater consideration with regard to continuous manufacturing technologies on the other side, it is possible nowadays to address the demands that structural and complex automotive parts have to face, from the standpoint of lightweight manufacturing. Thickness, shape and impact conditions constitute the main aspects to consider for such parts and shape conditions in particular require from complex, costly and lengthy procedures, especially when discontinuous forming operations such as stamping and hydro forming procedures are selected. However, continuous forming operations like Roll Forming (RF) can prove to be advantageous and suited for scalable parts (e.g in length) and at the same time be economically reasonable. RF lines as well generally incorporate additional installations to perform multiple forming operations destined to imprint strengthening ribs perform punching operations or weld certain parts. It is in this context where the usefulness of the electromagnetic forming technology for completion of auxiliary operations can be proven, given its flexibility and reasonable investment costs. Electromagnetic forming (EMF) is a contact-free technique where large forces can be imparted to a conductive metallic workpiece by a pure electromagnetic interaction. The produced electromagnetic pressure can produce stresses in the workpiece that are several times larger than the material flow stress. Ultimately this can cause the workpiece to deform plastically and to be accelerated achieving high velocities. Once the velocity is imparted to the workpiece, the shape can be developed either by free or die forming. The work described in this paper explores the potential of the EMF process to adequately form shallow longitudinal ribs or stiffeners in components previously formed utilizing an innovative concept called Flexible Roll Forming, developed at The Technical University of Darmstadt in Germany, by means of magnetic pulse forming, maintaining the integrity of the workpiece while trying to meet industry standard tolerances. Profiles exhibiting hat-like cross sections made of AHSS steels were subjected to localized impulses in order to achieve strengthening features in the roll formed part. ZStE340 steel alloy profiles were first roll formed and then inserted in the EM forming installation designed for the occasion. A high strength copper alloy (Cr-Zr-Cu) was used as a conductor for the single turn coil, placed opposite to the sidewall in the moment of the energy delivery. Formed specimens were subsequently measured to account for existing dimensional deviations