Design of reflective filters based on organic materials using genetic algorithms

In this work we propose a genetic algorithm for the design of reflective filters consisting of organic materials. The algorithm chooses the materials of the layers from the list of available materials and chooses their thickness in order to obtain optimal reflectance characteristics. The wavelength dependence of the refractive index and the coefficient of extinction of the layers is taken into account.published_or_final_versio

Measurement of Permanent Electric Dipole Moments of Charged Hadrons in Storage Rings

Permanent Electric Dipole Moments (EDMs) of elementary particles violate two fundamental symmetries: time reversal invariance (T) and parity (P). Assuming the CPT theorem this implies CP-violation. The CP-violation of the Standard Model is orders of magnitude too small to be observed experimentally in EDMs in the foreseeable future. It is also way too small to explain the asymmetry in abundance of matter and anti-matter in our universe. Hence, other mechanisms of CP violation outside the realm of the Standard Model are searched for and could result in measurable EDMs. Up to now most of the EDM measurements were done with neutral particles. With new techniques it is now possible to perform dedicated EDM experiments with charged hadrons at storage rings where polarized particles are exposed to an electric field. If an EDM exists the spin vector will experience a torque resulting in change of the original spin direction which can be determined with the help of a polarimeter. Although the principle of the measurement is simple, the smallness of the expected effect makes this a challenging experiment requiring new developments in various experimental areas. Complementary efforts to measure EDMs of proton, deuteron and light nuclei are pursued at Brookhaven National Laboratory and at Forschungszentrum Juelich with an ultimate goal to reach a sensitivity of 10^{-29} e cm.Comment: 8 pages, 2 figure

Surface treatments of indium-tin-oxide substrates: Comprehensive investigation of mechanical, chemical, thermal, and plasma treatments

Various surface treatments significantly affect the work function and surface roughness of indium tin oxide (ITO), and thusly influence charge injection and overall performance of organic light emitting diodes (OLEDs). Large number of treatments, most commonly oxygen plasma treatment and UV-ozone treatment, have been proposed to improve characteristics of ITO. In this work, we have investigated a) mechanical treatments (mechanical rubbing, followed by ultrasonic bath), b) chemical treatments (dipping into aqueous solutions of various acids, including acids which have not been investigated previously) c) thermal treatments (thermal annealing in different atmospheres) d) plasma treatments e) UV ozone treatment f) different combinations of the above. We have measured surface sheet resistance of the samples and investigated surface morphology of the treated samples and compared them to "as-received" samples. We have selected several treatments giving best results. Then we have fabricated OLEDs using ITO substrates treated with treatments selected, as well as a control OLED fabricated on "as-received" ITO. The impact of ITO treatments on the performance of OLEDs have been investigated on two types of devices, OLEDs with and without transport layer, having the structures glass/ITO/Alq 3/Al and glass/ITOFrPD/Alq 3/Al, respectively, where Alq 3 (tris-(8-hydroxyquinoline) aluminum) is emitting layer and TPD (N,N′-diphenyl-N,N′-bis(3-methyl-phenyl)-1, 1′ biphenil-4,4′diamine) is a hole transport layer.published_or_final_versio

Enhancement of anammox performance in a novel non-woven fabric membrane bioreactor (nMBR)

© 2015 The Royal Society of Chemistry. To reduce operating costs and membrane fouling of conventional membrane bioreactors (cMBR), a novel MBR using a non-woven fabric membrane (nMBR) was constructed and the performance of the two MBRs was compared for anaerobic ammonium oxidation (anammox) cultivation. The results showed that the start-up period for the nMBR (44 days) was notably shorter than that for the cMBR (56 days), meanwhile the nMBR achieved a 2-times higher nitrogen removal rate (231.5 mg N per L per d) compared to the cMBR (112.3 mg N per L per d). Illumina MiSeq sequencing showed that Candidatus Kuenenia and Candidatus Jettenia were the main distinguished anammox bacteria. FISH analysis revealed that anammox bacteria predominated in both reactors, especially in the nMBR (58%) corresponding to a qPCR analysis of 1.07 × 109 copies per mL (day 120). N2O emission analysis confirmed the advantage of the nMBR in N2O reduction to reduce the influence of greenhouse gas emission while treating identical nitrogen. These results clearly demonstrated that nMBRs could be a prospective choice for anammox start-up and performance enhancement

The effect of Matmo typhoon on mixed zone between the Yellow sea and Bohai sea

The results of remote sensing, buoy and profile based on measured data indicate that the wind speed, H-1/3 and salinity increased, sea surface temperature declined, and wind direction changed greatly during the transit of the Matmo typhoon on July 25. It was found that the typhoon transport the Yellow Sea Cold Water Mass into the the Yellow and Bohai seas mixed zone

Milling plant and soil material in plastic tubes over-estimates carbon and under-estimates nitrogen concentrations

Peer reviewedPostprin

Improved Constraints on Sterile Neutrino Mixing from Disappearance Searches in the MINOS, MINOS+, Daya Bay, and Bugey-3 Experiments.

Searches for electron antineutrino, muon neutrino, and muon antineutrino disappearance driven by sterile neutrino mixing have been carried out by the Daya Bay and MINOS+ collaborations. This Letter presents the combined results of these searches, along with exclusion results from the Bugey-3 reactor experiment, framed in a minimally extended four-neutrino scenario. Significantly improved constraints on the θ_{μe} mixing angle are derived that constitute the most constraining limits to date over five orders of magnitude in the mass-squared splitting Δm_{41}^{2}, excluding the 90% C.L. sterile-neutrino parameter space allowed by the LSND and MiniBooNE observations at 90% CL_{s} for Δm_{41}^{2}<13  eV^{2}. Furthermore, the LSND and MiniBooNE 99% C.L. allowed regions are excluded at 99% CL_{s} for Δm_{41}^{2}<1.6 eV^{2}

Resonances in J/ψ→ϕπ+π−J/\psi \to \phi \pi ^+\pi ^- and ϕK+K−\phi K^+K^-

A partial wave analysis is presented of $J/\psi \to \phi \pi ^+\pi ^-$ and $\phi K^+K^-$ from a sample of 58M $J/\psi$ events in the BES II detector. The $f_0(980)$ is observed clearly in both sets of data, and parameters of the Flatt\' e formula are determined accurately: $M = 965 \pm 8$ (stat) $\pm 6$ (syst) MeV/c$^2$, $g_1 = 165 \pm 10 \pm 15$ MeV/c$^2$, $g_2/g_1 = 4.21 \pm 0.25 \pm 0.21$. The $\phi \pi \pi$ data also exhibit a strong $\pi \pi$ peak centred at $M = 1335$ MeV/c$^2$. It may be fitted with $f_2(1270)$ and a dominant $0^+$ signal made from $f_0(1370)$ interfering with a smaller $f_0(1500)$ component. There is evidence that the $f_0(1370)$ signal is resonant, from interference with $f_2(1270)$. There is also a state in $\pi \pi$ with $M = 1790 ^{+40}_{-30}$ MeV/c$^2$ and $\Gamma = 270 ^{+60}_{-30}$ MeV/c$^2$; spin 0 is preferred over spin 2. This state, $f_0(1790)$, is distinct from $f_0(1710)$. The $\phi K\bar K$ data contain a strong peak due to $f_2'(1525)$. A shoulder on its upper side may be fitted by interference between $f_0(1500)$ and $f_0(1710)$.Comment: 17 pages, 6 figures, 1 table. Submitted to Phys. Lett.

Measurement of the Branching Fraction of J/psi --> pi+ pi- pi0

Using 58 million J/psi and 14 million psi' decays obtained by the BESII experiment, the branching fraction of J/psi --> pi+ pi- pi0 is determined. The result is (2.10+/-0.12)X10^{-2}, which is significantly higher than previous measurements.Comment: 9 pages, 8 figures, RevTex