Atomistic simulations of dislocation mobility in Al, Ni and Al/Mg alloys

Dislocation velocities and mobilities are studied by Molecular Dynamics simulations for edge and screw dislocations in pure aluminum and nickel, and edge dislocations in Al-2.5%Mg and Al-5.0%Mg random substitutional alloys using EAM potentials. In the pure materials, the velocities of all dislocations are close to linear with the ratio of (applied stress)/(temperature) at low velocities, consistent with phonon drag models and quantitative agreement with experiment is obtained for the mobility in Al. At higher velocities, different behavior is observed. The edge dislocation velocity remains dependent solely on (applied stress)/(temperature) up to approximately 1.0 MPa/K, and approaches a plateau velocity that is lower than the smallest "forbidden" speed predicted by continuum models. In contrast, above a velocity around half of the smallest continuum wave speed, the screw dislocation damping has a contribution dependent solely on stress with a functional form close to that predicted by a radiation damping model of Eshelby. At the highest applied stresses, there are several regimes of nearly constant (transonic or supersonic) velocity separated by velocity gaps in the vicinity of forbidden velocities; various modes of dislocation disintegration and destabilization were also encountered in this regime. In the alloy systems, there is a temperature- and concentration-dependent pinning regime where the velocity drops sharply below the pure metal velocity. Above the pinning regime but at moderate stresses, the velocity is again linear in (applied stress)/(temperature) but with a lower mobility than in the pure metal.Comment: PDF, 30 pages including figures, submitted to Modelling Simul. Mater. Sci. En

Characteristics of patients operated for primary hyperparathyroidism at university hospitals in Türkiye: Differences among Türkiye's geographical regions

Purpose: The aim of this study was to define the clinical and laboratory characteristics of patients operated on for primary hyperpatathyroidism (PHPT) at university hospitals in Türkiye, and to investigate the differences in the clinical presentations of the disease between different geographical regions. Methods: Patients operated on for PHPT in the university hospitals of Türkiye were included in the study. The demographic, clinical, and laboratory findings and the operational data of the patients were investigated according to the whole country and to different geographical regions. Comparisons were performed according to whole country and regions. Results: A total of 1,162 cases were included in the study from different regions and 20 university hospitals. The mean age of patients was 52.4 ± 0.38 (mean ± standard error) in the general population of Türkiye. The rates of hypertension, urolithiasis, bone disease and 25-hydroxyvitamin D insufficiency were 35%, 18.6%, 67.6%, and 63%, respectively. The median parathormone (PTH), serum total calcium (Ca+2) and phosphorus value were 220 pg/mL (range, 70-2,500 pg/mL), 11.2 mg/dL (range, 9.5-11.2 mg/dL), and 2.4 mg/dL (range, 1-4.7 mg/dL), respectively. The median size of the adenomas resected was 16 mm (range, 4-70 mm). Significant differences were observed in the clinical and laboratory findings of the patients operated on due to PHPT between different geographical regions of Türkiye (P < 0.05). Conclusion: The clinical and laboratory characteristics of the patients with PHPT in different geographical regions of Türkiye differ. Furthermore, the general findings of the cases in Türkiye give us a hint that the severity of the disease here is somewhere between Eastern and Western countries. Copyright © 2016, the Korean Surgical Society

Oncoplastic breast consortium recommendations for mastectomy and whole breast reconstruction in the setting of post-mastectomy radiation therapy

Aim Demand for nipple- and skin- sparing mastectomy (NSM/SSM) with immediate breast reconstruction (BR) has increased at the same time as indications for post-mastectomy radiation therapy (PMRT) have broadened. The aim of the Oncoplastic Breast Consortium initiative was to address relevant questions arising with this clinically challenging scenario. Methods A large global panel of oncologic, oncoplastic and reconstructive breast surgeons, patient advocates and radiation oncologists developed recommendations for clinical practice in an iterative process based on the principles of Delphi methodology. Results The panel agreed that surgical technique for NSM/SSM should not be formally modified when PMRT is planned with preference for autologous over implant-based BR due to lower risk of long-term complications and support for immediate and delayed-immediate reconstructive approaches. Nevertheless, it was strongly believed that PMRT is not an absolute contraindication for implant-based or other types of BR, but no specific recommendations regarding implant positioning, use of mesh or timing were made due to absence of high-quality evidence. The panel endorsed use of patient-reported outcomes in clinical practice. It was acknowledged that the shape and size of reconstructed breasts can hinder radiotherapy planning and attention to details of PMRT techniques is important in determining aesthetic outcomes after immediate BR. Conclusions The panel endorsed the need for prospective, ideally randomised phase III studies and for surgical and radiation oncology teams to work together for determination of optimal sequencing and techniques for PMRT for each patient in the context of BR

Optymalizacja parametrów lutowania i laserowego spawania jubilerskich stopów złota

In this study, brazing and laser welding were experimentally compared for 9, 14 and 18 carat gold alloys in different color. The gold alloys were joined by laser welding and brazing and the microstructure, hardness, chemical composition, color of the weld joints were investigated. According to study, in laser welding, voltage, pulse duration, pulse diameter and frequency are the most important welding parameters that influence the quality of joints. Welded joints are characterized using three geometric parameters: penetration depth, width of heat affected zone and underfill defects. Finally, optimum laser welding parameters of different color of 9, 14 and 18 carat gold alloys were determined. It is observed that laser welding has numerous advantages compared to the other joining techniques used in the jewelry industry.W pracy, porównano eksperymentalnie lutowanie i spawanie laserowe 9, 14 i 18 karatowych stopów złota o różnym kolorze. Zbadano mikrostrukturę, twardość, skład chemiczny i kolor połączeń. Wyniki badań spawania laserowego wskazują, że napięcie, czas trwania impulsu, średnica impulsu i częstotliwość to najważniejsze parametry, które wpływają na jakość połączeń. Spawane połączenia opisać można przy użyciu trzech geometrycznych parametrów: głębokość penetracji, szerokość strefy wpływu ciepła i defektów wypełnienia. Ustalono optymalne parametry spawania laserowego 9, 14 i 18 karatowych stopów złota o różnym kolorze. Stwierdzono, że spawanie laserowe ma wiele zalet w porównaniu do innych technik łączenia stosowanych w przemyśle jubilerskim

Diagnostic significance of cytomegalovirus DNA quantitation in gastrointestinal biopsies: comparison with histopathological data and blood cytomegalovirus DNA.

Objective

Vibrational spectral and quantum chemical investigations of tert-butyl-hydroquinone

WOS: 000301606300023The Fourier transform infrared (FT-IR) and micro-Raman spectra of tert-butyl-hydroquinone were recorded in the region 4000-400 cm(-1) and 4000-50 cm(-1), respectively. Conformational space was scanned with molecular mechanic simulations. All other calculations were performed by B3LYP/6-311G++(d,p) level of theory. The molecular structure and vibrational frequencies of the title compound were calculated and compared with experimental spectra. Theoretical vibrational spectra of the title compound were interpreted by means of TEDs. Predicted electronic absorption spectrum of tert-butylhydroquinone from TD-DFT calculation was analyzed and compared with the experimental UV-visible spectrum. (C) 2012 Elsevier B.V. All rights reserved.BAP office of Selcuk UniversitySelcuk University [11401012]This work was supported by the BAP office of Selcuk University (Project Number: 11401012)