93 research outputs found
Using student talk and reader response journals with emergent readers
The purpose of this study was to explore the impact on comprehension when emergent readers use talk and reader response journals to comprehend text. Data collected from reading attitude surveys, interviews, student journal entries, audio-recorded student conversations and notes in a teacher researcher journal were analyzed for emerging themes. The findings show that talk about text and the use of reader response journals have a positive impact on both reading comprehension and motivation. Implications for future research are discussed in chapter five
Corporate Social Responsibility: the Challenges and Constraints
This article discusses the chances and vulnerabilities of corporate social responsibility (CSR) on two main levels: the small and medium sector at a local level; and big corporations at the macro and international levels. The modern understanding of the definition of CSR is also analyzed. This concept in the management sciences is often misunderstood because it is usually seen as one means in the struggle to achieve a better competitive position. On the other hand, for the development sciences CSR is an effective instrument of income redistribution and as an addition to state support for the underprivileged social groups
High-energy threshold reaction rates on 0.8 GeV proton-irradiated thick Pb-target
This works presents results of activation-aided determination of threshold
reaction rates in 92 209Bi, natPb, 197Au, 181Ta, 169Tm, natIn, 93Nb, 64Zn,
65Cu, 63Cu, 59Co, 19F, and 12C samples and in 121 27Al samples. All the samples
were aligned with the proton beam axis inside and outside the demountable 92-cm
thick Pb target of 15-cm diameter assembled of 23 4-cm thick discs. The samples
were placed on 12 target disks to reproduce the long axis distribution of
protons and neutrons. In June 2006, the target was exposed for 18 hours to a
800-MeV proton beam extracted from the ITEP U-10 accelerator. The proton
fluence and the proton beam shape were determined using the 27Al(p,x)7Be
monitor reaction. The reaction rates were determined by the direct
gamma-spectrometry techniques. In total, 1196 gamma-spectra have been measured,
and about 1500 reaction rates determined. The measured reaction rates were
simulated by the MCNPX code using the following databases: ENDF/B6 for neutrons
below 20 MeV, MENDL2 for 20-100 MeV neutrons, and MENDL2P for proton cross
sections up to 200 MeV. An acceptable agreement of simulations with
experimental data has been found.Comment: 4 pages, 5 figures, 3 tables, only pdf file, to be published in Proc.
Int. Conf. on Nucl. Data for Sci. and Technology (ND2007), Nice, France,
April 22-27, 200
Residual nuclide formation in 206,207,208,nat-Pb and 209-Bi induced by 0.04-2.6 GeV Protons as well as in 56-Fe induced by 0.3-2.6 GeV Protons
5972 independent and cumulative yields of radioactive residuals nuclei have
been measured in 55 thin 206,207,208,nat-Pb and 209-Bi targets irradiated by
0.04, 0.07, 0.10, 0.15, 0.25, 0.6, 0.8, 1.2, 1.4, 1.6, and 2.6 GeV protons.
Besides, 219 yields have been measured in 0.3, 0.5, 0.75, 1.0, 1.5, and 2.6 GeV
proton-irradiated 56-Fe target. The protons were extracted from the ITEP U-10
synchrotron. The measured data are compared with experimental results obtained
elsewhere and with theoretical calculations by LAHET, MCNPX, CEM03, LAQGSM03,
CASCADE, CASCADO, and LAHETO codes. The predictive power was found to be
different for each of the codes tested, but was satisfactory on the whole in
the case of spallation products. At the same time, none of the codes can
de-scribe well the product yields throughout the whole product mass range, and
all codes must be further improved.Comment: 4 pages, 4 figures, 2 tables, only pdf file, to be published in Proc.
Int. Conf. on Nucl. Data for Sci. and Technology (ND2007), Nice, France,
April 22-27, 20
Successful Implementation of the ABCDEF Bundle in the MICU through Interprofessional Collaboration and Teamwork
Earlier this year, members of the medical intensive care unit (MICU) attended an interprofessional workshop that utilized Awakening/Breathing/Choice of Sedation/Delirium/Early Mobility (ABCDE) bundle simulation combined with TeamSTEPPS training to empower care givers to advocate for patient safety while optimizing patient care. The ABCDE bundle is an evidence-based tool designed to implement pain, agitation, and delirium guideline recommendations into routine practice. To further improve patient safety and outcomes and build upon the ABCDE concept, the MICU team developed an interprofession-al practice project by adding routine assessment of need for indwelling Foley catheters to their daily work list, creating the “ABCDEF” bundle
Intelligent sensor platform with open architecture for monitoring and control of Industry 4.0 systems
PURPOSE: The work covers the development of intelligent sensors, as well as intelligent
mechanisms for the assembly and control of industrial processes using modern measurement
techniques, process tomography, vision systems, motion and temperature sensors.DESIGN/METHODOLOGY/APPROACH: Tomographic techniques and new analytical algorithms
were used. Special algorithms have been developed to combine data from different types of
measurements in real time to identify potential hazards or undesirable effects.FINDINGS: The use of various types of data in a single decision-making process, starting with
the availability of resources, availability of staff and ending with the maintenance schedules
of machines, will allow for the analysis and optimisation of the process. The use of the socalled uncertain data and data that do not have an unambiguous impact on the production
process requires the use of solutions based on artificial intelligence algorithms in the
decision-making process, which are able to draw conclusions relatively quickly based on
such data, and then quickly affect the optimisation of the production process. The results of
the conducted research indicate that a platform with an open architecture can be a useful
tool in the control and steering of industrial processes.PRACTICAL IMPLICATIONS: A measurement module that allows to unify the signal coming out of
particular measurement sub-assemblies to a coherent form, thanks to which the acquisition,
storage and processing of any quantity can be carried out in a similar way for each case.ORIGINALITY/VALUE: The novelty and innovation of the system is a unique technological
solution (types of measurements and data processing), new algorithms for optimisation,
reconstruction and data analysis, a unique multi-module device based on tomographic
technologies. The project as a whole as well as each of its components is innovative on a
global scale. The use of tomography for analysis, control and monitoring of technological
processes is an innovative solution.peer-reviewe
Collective dynamics of liquid aluminum probed by Inelastic X-ray Scattering
An inelastic X-ray scattering experiment has been performed in liquid
aluminum with the purpose of studying the collective excitations at wavevectors
below the first sharp diffraction peak. The high instrumental resolution (up to
1.5 meV) allows an accurate investigation of the dynamical processes in this
liquid metal on the basis of a generalized hydrodynamics framework. The
outcoming results confirm the presence of a viscosity relaxation scenario ruled
by a two timescale mechanism, as recently found in liquid lithium.Comment: 8 pages, 7 figure
Density fluctuations and single-particle dynamics in liquid lithium
The single-particle and collective dynamical properties of liquid lithium
have been evaluated at several thermodynamic states near the triple point. This
is performed within the framework of mode-coupling theory, using a
self-consistent scheme which, starting from the known static structure of the
liquid, allows the theoretical calculation of several dynamical properties.
Special attention is devoted to several aspects of the single-particle
dynamics, which are discussed as a function of the thermodynamic state. The
results are compared with those of Molecular Dynamics simulations and other
theoretical approaches.Comment: 31 pages (in preprint format), 14 figures. Submitted to Phys. Rev.
Cross-sections for nuclide production in 56Fe target irradiated by 300, 500,750, 1000, 1500, and 2600 MeV protons compared with data on hydrogen target irradiation by 300, 500, 750, 1000, and 1500 MeV/nucleon 56Fe ions
Cross-sections for radioactive nuclide production in 56Fe(p,x) reactions at
300, 500, 750, 1000, 1500, and 2600 MeV were measured using the ITEP U-10
proton accelerator. In total, 221 independent and cumulative yields of products
of half-lives from 6.6 min to 312 days have been obtained via the
direct-spectrometry method. The measured data have been compared with the
experimental data obtained elsewhere by the direct and inverse kinematics
methods and with calculations by 15 codes, namely: MCNPX (INCL, CEM2k, BERTINI,
ISABEL), LAHET (BERTINI, ISABEL), CEM03 (.01, .G1, .S1), LAQGSM03 (.01, .G1,
>.S1), CASCADE-2004, LAHETO, and BRIEFF. Most of our data are in a good
agreement with the inverse kinematics results and disprove the results of some
earlier activation measurements that were quite different from the inverse
kinematics measurements. The most significant calculation-to-experiment
differences are observed in the yields of the A<30 light nuclei, indicating
that further improvements in nuclear reaction models are needed, and pointing
out as well to a necessity of more complete measurements of such reactions.Comment: 53 pages, 9 figures, 6 tables, only pdf file, submitted to Phys. Rev.
- …