Analysis of Barrel Support Saddles and Forces Between Modules During Assembly.

As the Barrel Tile Calorimeter is constructed, the support saddles and the modules will be subjected to different forces, stresses, and deflections than when completely assembled. The purpose of this analysis is to examine the forces, stresses, and deflections acting on the support saddles and modules at various stages of assembly. The nominal weight of a barrel module is 20 tons. CERN Document number ATL-LB-EA-0001 'Summary of the Structural Analysis of the Barrel Support Saddles' describes in detail the structural analysis of the saddles and the completed barrel assembly. These calculations followed Eurocode 3. This paper examined several load cases which occur during the assembly of the Barrel. The following are the main conclusions: (1) The assembly is not stable until 18 modules are in place, and only then can the support cradle be removed; (2) The forces between modules are nominal and are far less that the forces in the completed cylinder with 64 modules in place and the cryostat load applied; (3) All of the stresses in the connections between modules are within acceptable limits; and (4) The interface between the cryostat supports and the cryostat move approximately 1.0 mm in the X and Y directions when the load of the cryostat is transferred to the Barrel

The coupled system response to 250 years of freshwater forcing: Last Interglacial CMIP6–PMIP4 HadGEM3 simulations

The lig127k-H11 simulation of the Paleoclimate Modelling Intercomparison Project (PMIP4) is run using the HadGEM3-GC3.1 model. We focus on the coupled system response to the applied meltwater forcing. We show here that the coupling between the atmosphere and the ocean is altered in the hosing experiment compared to a Last Interglacial simulation with no meltwater forcing applied. Two aspects in particular of the atmosphere–ocean coupling are found to be affected: Northern Hemisphere (NH) gyre heat transport and Antarctic sea ice area. We apply 0.2 Sv of meltwater forcing across the North Atlantic during a 250-year-long simulation. We find that the strength of the Atlantic Meridional Overturning Circulation (AMOC) is reduced by 60 % after 150 years of meltwater forcing, with an associated decrease of 0.2 to 0.4 PW in meridional ocean heat transport at all latitudes. The changes in ocean heat transport affect surface temperatures. The largest increase in the meridional surface temperature gradient occurs between 40–50∘ N. This increase is associated with a strengthening of 20 % in 850 hPa winds. The jet stream intensification in the Northern Hemisphere in return alters the temperature structure of the ocean by increasing the gyre circulation at the mid-latitudes and the associated heat transport by +0.1–0.2 PW, and it decreases the gyre circulation at high latitudes with a decrease of ocean heat transport of −0.2 PW. The changes in meridional surface temperature and pressure gradients cause the Intertropical Convergence Zone (ITCZ) to move southward, leading to stronger westerlies and a more positive Southern Annual Mode (SAM) in the Southern Hemisphere (SH). The positive SAM influences sea ice formation, leading to an increase in Antarctic sea ice.</p

EuroSL – a European taxonomic backbone for vegetation databases and other taxon- related databases: version 1.0

Background: A taxonomic reference list is an indispensable tool to sample, manage and match biodiversity data from different sources. Merging vegetation databases or combining them with taxon-related attributes needs reliable and consistent information about the taxon concepts used and an appropriate naming. Aim: Creating a “taxonomic backbone” of European vascular plants and bryophytes with links to widespread taxonomic references. Methods: We used the Euro+Med plant list (Euro+Med 2006ff), version 2015/04. For all families not yet covered there we used taxa from Flora Europaea (Tutin et al. 1980ff). Additionally we included the aggregates from the Ehrendorfer (1973) list. For bryophytes we rely on Grolle & Long (2000) and Hill et al. (2006). Results: EuroSL 1.0 covers > 45T accepted taxa and >77T synonyms from approx. 370 families. At the species level this means approx. 32T accepted names and >44T synonyms. EuroSL list will be published open access to allow referencing and connecting taxon-related databases beyond country borders. Future releases of EuroSL might contain additional taxonomic groups (algae and lichens), aggregates or new names as needed. However, a thorough documentation and transparency regarding taxon concepts, i.e. name usage = taxon circumscription, given by citing the source lists, will remain the highest priority. The first application of EuroSL will be the compilation of Ecological Indicator Values for Europe (EIVE version 1.0)

Towards an Ontological Modelling of Preference Relations

Preference relations are intensively studied in Economics, but they are also approached in AI, Knowledge Representation, and Conceptual Modelling, as they provide a key concept in a variety of domains of application. In this paper, we propose an ontological foundation of preference relations to formalise their essential aspects across domains. Firstly, we shall discuss what is the ontological status of the relata of a preference relation. Secondly, we investigate the place of preference relations within a rich taxonomy of relations (e.g. we ask whether they are internal or external, essential or contingent, descriptive or nondescriptive relations). Finally, we provide an ontological modelling of preference relation as a module of a foundational (or upper) ontology (viz. OntoUML). The aim of this paper is to provide a sharable foundational theory of preference relation that foster interoperability across the heterogeneous domains of application of preference relations

The Central Laser Facility at the Pierre Auger Observatory

The Central Laser Facility is located near the middle of the Pierre Auger Observatory in Argentina. It features a UV laser and optics that direct a beam of calibrated pulsed light into the sky. Light scattered from this beam produces tracks in the Auger optical detectors which normally record nitrogen fluorescence tracks from cosmic ray air showers. The Central Laser Facility provides a "test beam" to investigate properties of the atmosphere and the fluorescence detectors. The laser can send light via optical fiber simultaneously to the nearest surface detector tank for hybrid timing analyses. We describe the facility and show some examples of its many uses.Comment: 4 pages, 5 figures, submitted to 29th ICRC Pune Indi

Construction of a Schwarzschild-Couder telescope as a candidate for the Cherenkov Telescope Array: status of the optical system

We present the design and the status of procurement of the optical system of the prototype Schwarzschild-Couder telescope (pSCT), for which construction is scheduled to begin in fall at the Fred Lawrence Whipple Observatory in southern Arizona, USA. The Schwarzschild-Couder telescope is a candidate for the medium-sized telescopes of the Cherenkov Telescope Array, which utilizes imaging atmospheric Cherenkov techniques to observe gamma rays in the energy range of 60Gev-60TeV. The pSCT novel aplanatic optical system is made of two segmented aspheric mirrors. The primary mirror has 48 mirror panels with an aperture of 9.6 m, while the secondary, made of 24 panels, has an diameter of 5.4 m. The resulting point spread function (PSF) is required to be better than 4 arcmin within a field of view of 6.4 degrees (80% of the field of view), which corresponds to a physical size of 6.4 mm on the focal plane. This goal represents a challenge for the inexpensive fabrication of aspheric mirror panels and for the precise alignment of the optical system as well as for the rigidity of the optical support structure. In this submission we introduce the design of the Schwarzschild-Couder optical system and describe the solutions adopted for the manufacturing of the mirror panels and their integration with the optical support structure.Comment: In Proceedings of the 34th International Cosmic Ray Conference (ICRC2015), The Hague, The Netherlands. All CTA contributions at arXiv:1508.0589

What Can We Learn About Effective Mathematics Teaching?:A Framework for Estimating Causal Effects using Longitudinal Survey Data.

This study investigates the impact of teacher characteristics and instructional strategies on the mathematics achievement of students in kindergarten and first grade and tackles the question of how best to use longitudinal survey data to elicit causal inference in the face of potential threats to validity due to nonrandom assignment to treatment. We develop a step-by-step approach to selecting a modeling and estimation strategy and find that teacher certification and courses in methods of teaching mathematics have a slightly negative effect on student achievement in kindergarten, whereas postgraduate education has a positive effect in first grade. Various teaching modalities, such as working with counting manipulatives, using math worksheets, and completing problems on the chalkboard, have positive effects on achievement in kindergarten, and pedagogical practices relating to explaining problem solving and working on problems from textbooks have positive effects on achievement in first grade. We show that the conclusions drawn depend on the estimation and modeling choices made and that several prior studies of teacher effects using longitudinal survey data likely neglected important features needed to establish causal inference

High fat diet blunts the effects of leptin on ventilation and on carotid body activity

Funding : This study was supported by the Portuguese Foundation for Science and Technology grant PTDC/SAU-ORG/111417/2009 to S.C. and by Grants BFU2015-70616R from MINECO-FEDER, Spain. J.F.S. and B.F.M. are supported by PhD Grants from FCT, PD/BD/105890/2014 and PD/BD/128336/2017, respectively.Leptin plays a role in the control of breathing, acting mainly on central nervous structures. Leptin receptor is expressed in the carotid body (CB) and this finding has been associated with a putative physiological role of leptin in the regulation of CB function. Since, the CBs are implicated in energy metabolism herein we tested the effects of different concentrations of leptin administration on ventilatory parameters and on carotid sinus nerve (CSN) activity in control and high-fat (HF) diet fed rats, in order to clarify the role of leptin in ventilation control in metabolic disease states. We also investigated the expression of leptin receptors and the neurotransmitters involved in leptin signalling in the CBs. We found that in non-disease conditions, leptin increases minute ventilation both in basal and hypoxic conditions. However, in the HF model, the effect of leptin in ventilatory control is blunted. We also observed that HF rats display an increased frequency of CSN discharge in basal conditions that is not altered by leptin, in contrast to what is observed in control animals. Leptin did not modify intracellular Ca2+ in CB chemoreceptor cells, but it produced an increase in the release of adenosine from the whole CB. We conclude that CBs represent an important target for leptin signalling, not only to coordinate peripheral ventilatory chemoreflexive drive, but probably also to modulate metabolic variables. We also concluded that leptin signalling is mediated by adenosine release and that HF diets blunt leptin responses in the CB, compromising ventilatory adaptation. This article is protected by copyright. All rights reserved.publishersversionpublishe

Electro-optically tunable microring resonators in lithium niobate

Optical microresonators have recently attracted a growing attention in the photonics community. Their applications range from quantum electro-dynamics to sensors and filtering devices for optical telecommunication systems, where they are likely to become an essential building block. The integration of nonlinear and electro-optical properties in the resonators represents a very stimulating challenge, as it would incorporate new and more advanced functionality. Lithium niobate is an excellent candidate material, being an established choice for electro-optic and nonlinear optical applications. Here we report on the first realization of optical microring resonators in submicrometric thin films of lithium niobate. The high index contrast films are produced by an improved crystal ion slicing and bonding technique using benzocyclobutene. The rings have radius R=100 um and their transmission spectrum has been tuned using the electro-optic effect. These results open new perspectives for the use of lithium niobate in chip-scale integrated optical devices and nonlinear optical microcavities.Comment: 15 pages, 8 figure