Processing and characterization of dual phase steel foam

Porous materials featuring cellular structures are known to have many interesting combinations of physical and mechanical properties. Some of them have been extensively used in the transportation field (i.e. balsa wood). Steel foams presented promising theoretical properties for both functional and structural applications in transportation, but processing of such a kind of foams is complex due to their high melting point. Recently a technique for processing Cu-based alloys open-cell foams through the molten metal infiltration of a leachable bed of amorphous SiO2 particles was proposed. A variation of the proposed technique that uses SiC particles as space holder is now presented and was recently successfully applied for dual phase steel foam processing. Results from a processing of dual phase DP500 steel foams, including some morphological, micro-structural and mechanical characterization, are here presented

Polyhedral Oligomeric Silsesquioxane Based Catalyst for the Efficient Synthesis of Cyclic Carbonates

In this work, the synthesis of a novel imidazolium-based polyhedral oligomeric silsesquioxane (POSS-mim-Cl) material is presented. The new nanometer-size organosilica based compound was employed for chemical fixation of CO2 into epoxide under homogeneous conditions. The target reaction was represented by the obtention of cyclic carbonates starting from epoxides and CO2. Particularly, styrene oxide was chosen as reference substrate. In addition, different parameters (solvent, temperature, pressure of CO2, and mass of the catalyst) were modified to find the best condition for CO2 conversion. The catalyst POSS-mim-Cl displayed good catalytic performances, the best results being obtained at 40 bar of CO2, 150\ub0C, with 110 mg of catalyst and using isopropanol as co-solvent. It is worth to mention that POSS-mim-Cl displayed better catalytic performance than the corresponding 1-butyl-3-methyl imidazolium chloride. As far as we know this study represents the first use of imidazolium-based POSS as catalysts for the chemical fixation of CO2

New Mussel Inspired Polydopamine-Like Silica-Based Material for Dye Adsorption

A straightforward and economic procedure has been developed for the synthesis of a new polydopamine-like silica-based material that has been obtained by oxidation of catechol with KIO4 followed by reaction with 3-aminopropyltrimethoxysilane. All techniques adopted for characterization showed that the obtained material is rich in different functional groups and the morphological analyses revealed dimensions in the nanometric range. The hybrid material has been characterized by several techniques showing its polydopamine-like nature, and preliminary observations for dye adsorption have been reported.University of Palermo PRIN2017- 2017YJMPZ

Highly Functionalized SWCNTs with a Dopamine Derivative as a Support for Pd Nanoparticles: A Recyclable Catalyst for the Reduction of Nitro Compounds and the Heck Reaction

Single-walled carbon nanotubes (SWCNTs) were functionalized with a dopamine derivative in which the amine group was converted to azide (dopamine azide). The direct reaction of SWCNTs and dopamine azide in o-dichlorobenzene at high temperature (160 °C) led to very highly functionalized CNTs (≈60 wt.%). Surprisingly, despite this high degree of functionalization, Raman spectroscopy detected a low disruption of the π-network of the carbonaceous support. This finding was justified by the rehybridization from sp3 to sp2 of the sidewall carbon atoms of CNTs involved in the functionalization process. Further characterization by means of different techniques such as X-ray photoelectron spectroscopy (XPS) analysis and transmission electron microscopy (TEM) allowed to shed some light on the chemical composition and morphology of the obtained material. Moreover, the estimation of the total content of phenolic units and their reducing potential after CNTs functionalization was also assessed using Folin and Ciocalteu and 2,2-diphenyl-1-picryl hydrazide (DPPH) assays. The functionalization of CNTs was exploited to immobilize palladium(II) species that were subsequently reduced with NaBH4 leading to the formation of Pd nanoparticles (NPs). The so obtained hybrid material was used as a recyclable heterogeneous catalyst for the reduction of nitro compounds and the Heck reaction

First Evidence of Tris(catecholato)silicate Formation from Hydrolysis of an Alkyl Bis(catecholato)silicate

The hydrolysis of 3-ammoniumpropylbis(catecholato)silicate 1, giving two different silica-based materials containing different amounts of tris(catecholato)silicate, is reported. The latter species can be formed through an attack of catechol to the silicon atom in the pentacoordinate complex, in which the silicon-carbon bond is further activated toward electrophilic proton cleavage. The Knoevenagel reaction was used as a probe in order to test the availability of functional groups on the surface of such materials

Effect of Shot Peening on Oxidation and Precipitation in Inconel 718

In this study, the effect of the surface state on the behaviour of Inconel 718 alloy exposed to 640 ∘ C and 700 ∘ C environments for times varying between one and one hundred hours was investigated. In particular, the focus was set on the evolution of oxidation and precipitation phenomena during thermal exposure. Three surface states were considered: two generated through shot peening treatments featuring different coverage levels, while the third condition is a non-peened one. Shot peening treatments modify the surface condition and introduce higher residual stresses and microhardness values than in the non-treated condition. The morphology of the oxides appears to be different depending on the condition observed. Regarding the kinetics, over time the oxidation process follows a parabolic trend and appears to be influenced by the surface state; in particular, severe shot peening treatment is characterized by the highest intensity of the phenomenon. However, the order of magnitude of the weight gains measured suggests that the observed variations can be neglected, and that the positive effect of shot peening can be exploited without introducing oxidation problems. From the point of view of the microstructural evolution, an increase in the coarsening kinetics of γ ” phase was observed in the shot peened layer

A study on the stability of carbon nanoforms–polyimidazolium network hybrids in the conversion of co2 into cyclic carbonates: Increase in catalytic activity after reuse

Three different carbon nanoforms (CNFs), single-walled and multi-walled carbon nanotubes (SWCNTs, MWCNTs) and carbon nanohorns (CNHs), have been used as supports for the direct polymerization of variable amounts of a bis-vinylimidazolium salt. Transmission electron microscopy confirmed that all CNFs act as templates on the growth of the polymeric network, which perfectly covers the nanocarbons forming a cylindrical (SWCNTs, MWCNTs) or spherical (CNHs) coating. The stability of these hybrid materials was investigated in the conversion of CO2 into cyclic carbonate under high temperature and CO2 pressure. Compared with the homopolymerized monomer, nanotube-based materials display an improved catalytic activity. Beside the low catalytic loading (0.05–0.09 mol%) and the absence of Lewis acid co-catalysts, all the materials showed high TON values (up to 1154 for epichlorohydrin with SW-1:2). Interestingly, despite the loss of part of the polymeric coating for crumbling or peeling, the activity increases upon recycling of the materials, and this behaviour was ascribed to their change in morphology, which led to materials with higher surface areas and with more accessible catalytic sites. Transmission electron microscopy analysis, along with different experiments, have been carried out in order to elucidate these findings

Systemic treatment for hepatocellular carcinoma beyond milan criteria on the waitlist: is it time for a neoadjuvant therapy?

n

Microstructural investigation on an Al 6061 T6 alloy subjected to ballistic impact C

Ballistic impact generates significant modifications in the microstructural patterns. High strain rate and local high temperature conditions work together in opposite way: the first causes strain hardening, while the second factor produces softening. Moreover, after the impact, the cooling process is responsible of other local modifications on the arrangement of dislocations and precipitates. Therefore an experimental analysis on Al 6061 T6 cut from the edge of a component subjected to ballistic impact has been carried on in order to investigate on the microstructural modifications. Considerations about the influence on the mechanical behavior and on the fracture propagation are reported. The crystallographic textures and the misorientation featuring the grains play in fact a significant role in the fracture mechanism. The comparison between the texture situation before and after the impact can allow to evaluate the localized straining of the material and to point out its dissipation efficiency as a function of the distance from the damaged surfaces © 2011 Published by Elsevier Ltd. Selection and peer-review under responsibility of ICM1