2,359 research outputs found
Unidirectional decomposition method for obtaining exact localized waves solutions totally free of backward components
In this paper we use a unidirectional decomposition capable of furnishing
localized wave pulses, with luminal and superluminal peak velocities, in exact
form and totally free of backward components, which have been a chronic problem
for such wave solutions. This decomposition is powerful enough for yielding not
only ideal nondiffracting pulses but also their finite energy versions still in
exact analytical closed form. Another advantage of the present approach is
that, since the backward spectral components are absent, the frequency spectra
of the pulses do not need to possess ultra-widebands, as it is required by the
usual localized waves (LWs) solutions obtained by other methods. Finally, the
present results bring the LW theory nearer to the real experimental
possibilities of usual laboratories.Comment: 28 pages, 6 figure
Suppression of Biodynamic Interference by Adaptive Filtering
Preliminary experimental results obtained in moving base simulator tests are presented. Both for pursuit and compensatory tracking tasks, a strong deterioration in tracking performance due to biodynamic interference is found. The use of adaptive filtering is shown to substantially alleviate these effects, resulting in a markedly improved tracking performance and reduction in task difficulty. The effect of simulator motion and of adaptive filtering on human operator describing functions is investigated. Adaptive filtering is found to substantially increase pilot gain and cross-over frequency, implying a more tight tracking behavior. The adaptive filter is found to be effective in particular for high-gain proportional dynamics, low display forcing function power and for pursuit tracking task configurations
Cooperation between Education and Business to Attract Young People to Engineering Education:(preliminary – work in progress)
Suppression of biodynamic interference in head-tracked teleoperation
The utility of helmet-tracked sights to provide pointing commands for teleoperation of cameras, lasers, or antennas in aircraft is degraded by the presence of uncommanded, involuntary heat motion, referred to as biodynamic interference. This interference limits the achievable precision required in pointing tasks. The noise contributions due to biodynamic interference consists of an additive component which is correlated with aircraft vibration and an uncorrelated, nonadditive component, referred to as remnant. An experimental simulation study is described which investigated the improvements achievable in pointing and tracking precision using dynamic display shifting in the helmet-mounted display. The experiment was conducted in a six degree of freedom motion base simulator with an emulated helmet-mounted display. Highly experienced pilot subjects performed precision head-pointing tasks while manually flying a visual flight-path tracking task. Four schemes using adaptive and low-pass filtering of the head motion were evaluated to determine their effects on task performance and pilot workload in the presence of whole-body vibration characteristic of helicopter flight. The results indicate that, for tracking tasks involving continuously moving targets, improvements of up to 70 percent can be achieved in percent on-target dwelling time and of up to 35 percent in rms tracking error, with the adaptive plus low-pass filter configuration. The results with the same filter configuration for the task of capturing randomly-positioned, stationary targets show an increase of up to 340 percent in the number of targets captured and an improvement of up to 24 percent in the average capture time. The adaptive plus low-pass filter combination was considered to exhibit the best overall display dynamics by each of the subjects
Delivery actuator for a transcervical sterilization device
The use of delivery systems in the human body for positioning and deploying implants, such as closure devices, dilation balloons, stents, coils and sterilization devices, are gaining more importance to preclude surgical incisions and general anesthesia. The majorities of the non-surgical medical devices are delivered in a low profile into human body form and subsequently require specialized operations for their deployment and release. An analogous procedure for permanent female sterilization is the transcervical approach that does not require either general anesthesia or surgical incision and uses a normal body passage. The objective of this paper is to detail the design, development and verification of an ergonomic actuator for a medical application. In particular, this actuator is designed for the deployment and release of an implant to achieve instant permanent female sterilization via the transcervical approach. This implant is deployed under hysteroscopic visualization and requires a sequence of rotary and linear operations for its deployment and release. More specifically, this manually operated actuator is a hand held device designed to transmit the required forces in a particular sequence to effect both implant deployment and release at a target location. In order to design the actuator and to investigate its mechanical behavior, a three-dimensional (3D) Computer Aided Design (CAD) model was developed and Finite Element Method (FEM) was used for simulations and optimization. Actuator validation was performed following a number of successful bench-top in-air deployments and in-vitro deployments in animal tissue and explanted human uteri. During these deployments it was observed that the actuator applied the required forces to the implant resulting in successful deployment. Initial results suggest that this actuator can be used single handedly during the deployment phase. The ongoing enhancement of this actuator is moving towards “first-in- man” clinical trials
Surface-hopping dynamics and decoherence with quantum equilibrium structure
In open quantum systems decoherence occurs through interaction of a quantum
subsystem with its environment. The computation of expectation values requires
a knowledge of the quantum dynamics of operators and sampling from initial
states of the density matrix describing the subsystem and bath. We consider
situations where the quantum evolution can be approximated by quantum-classical
Liouville dynamics and examine the circumstances under which the evolution can
be reduced to surface-hopping dynamics, where the evolution consists of
trajectory segments evolving exclusively on single adiabatic surfaces, with
probabilistic hops between these surfaces. The justification for the reduction
depends on the validity of a Markovian approximation on a bath averaged memory
kernel that accounts for quantum coherence in the system. We show that such a
reduction is often possible when initial sampling is from either the quantum or
classical bath initial distributions. If the average is taken only over the
quantum dispersion that broadens the classical distribution, then such a
reduction is not always possible.Comment: 11, pages, 8 figure
Spin-Current Relaxation Time in Spin-Polarized Heisenberg Paramagnets
We study the spatial Fourier transform of the spin correlation function
G_q(t) in paramagnetic quantum crystals by direct simulation of a 1d lattice of
atoms interacting via a nearest-neighbor Heisenberg exchange Hamiltonian. Since
it is not practical to diagonalize the s=1/2 exchange Hamiltonian for a lattice
which is of sufficient size to study long-wavelength (hydrodynamic)
fluctuations, we instead study the s -> infinity limit and treat each spin as a
vector with a classical equation of motion. The simulations give a detailed
picture of the correlation function G_q(t) and its time derivatives. At high
polarization, there seems to be a hierarchy of frequency scales: the local
exchange frequency, a wavelength-independent relaxation rate 1/tau that
vanishes at large polarization P ->1, and a wavelength-dependent spin-wave
frequency proportional to q^2. This suggests a form for the correlation
function which modifies the spin diffusion coefficients obtained in a moments
calculation by Cowan and Mullin, who used a standard Gaussian ansatz for the
second derivative of the correlation function.Comment: 6 pages, 3 figure
Pathological regional blood flow in opiate-dependent patients during withdrawal: A HMPAO-SPECT study
The aims of the present study were to investigate regional cerebral blood flow (rCBF) in heroin-dependent patients during withdrawal and to assess the relation between these changes and duration of heroin consumption and withdrawal data. The rCBF was measured using brain SPECT with Tc-99m-HMPAO in 16 heroin-dependent patients during heroin withdrawal. Thirteen patients received levomethadone at the time of the SPECT scans. The images were analyzed both visually and quantitatively, a total of 21 hypoperfused brain regions were observed in 11 of the 16 patients. The temporal lobes were the most affected area, hypoperfusions of the right and left temporal lobe were observed in 5 and 5 patients, respectively. Three of the patients had a hypoperfusion of the right frontal lobe, 2 patients showed perfusion defects in the left frontal lobe, right parietal lobe and left parietal lobe. The results of the quantitative assessments of the rCBF were consistent with the results of the qualitative findings. The stepwise regression analysis showed a significant positive correlation (r = 0.54) between the dose of levomethadone at the time of the SPECT scan and the rCBF of the right parietal lobe. Other significant correlations between clinical data and rCBF were not found. The present results suggest brain perfusion abnormalities during heroin withdrawal in heroin-dependent patients, which are not due to the conditions of withdrawal
A molecular signature of myalgia in myotonic dystrophy 2
Background: Chronic muscle pain affects close to 20% of the population and is a major health burden. The underlying mechanisms of muscle pain are difficult to investigate as pain presents in patients with very diverse histories. Treatment options are therefore limited and not tailored to underlying mechanisms. To gain insight into the pathophysiology of myalgia we investigated a homogeneous group of patients suffering from myotonic dystrophy type 2 (DM2), a monogenic disorder presenting with myalgia in at least 50% of affected patients. Methods: After IRB approval we performed an observational cross-sectional cohort study and recruited 42 patients with genetically confirmed DM2 plus 20 healthy age and gender matched control subjects. All participants were subjected to an extensive sensory-testing protocol. In addition, RNA sequencing was performed from 12 muscle biopsy specimens obtained from DM2 patients.
Findings: Clinical sensory testing as well as RNA sequencing clearly separated DM2 myalgic from non-myalgia patients and also from healthy controls. In particular pressure pain thresholds were significantly lowered for all muscles tested in myalgic DM2 patients but were not significantly different between non-myalgic patients and healthy controls. The expression of fourteen muscle expressed genes in myalgic patients was significantly up or down-regulated in myalgic compared to non-myalgic DM2 patients. Interpretation: Our data support the idea that molecular changes in the muscles of DM2 patients are associated with muscle pain. Further studies should address whether muscle-specific molecular pathways play a significant role in myalgia in order to facilitate the development of mechanism-based therapeutic strategies to treat musculoskeletal pain
Lunnyu soils in the Lake Victoria basin of Uganda: Link to toposequence and soil type
We compared the physico-chemical characteristics of Lunnyu soils using soil type and slope position in order to explain their variability in the Lake Victoria basin of Uganda. Lunnyu patches located on four different soil types (chromic lixisol, mollic gleysols and plinthic ferralsols) were selected. At each patch, the slope was divided into shoulder, back-slope and foot-slope. Five locations along the contour of each landscape position and at distance of 20 to 30 m were located and soil samples taken at two depths (0 to 20 cm and 20 to 40 cm). The soils were analyzed for pH, available P, texture, and exchangeable bases. Lunnyu patches on chromic lixisol and mollic gleysols had higher pH, P, sand, clay and silt compared to those on plinthic ferralsols and petrifferic lixisol. Neither of the soil properties was influenced by landscape position. Soil pH, Ca, Mg, and K were higher in topsoil compared to subsoil. Neither slope position nor the type of lunnyu has showed consistent differences in all the soil properties. Results suggest a pedological explanation in which pH and texture could influence occurrence of the lunnyu soils. We recommend further studies of the pedological properties of the soils and other trace elements that this study has not investigated.Key words: Lunnyu soil, toposequence, soil type, Uganda
- …