Mate limitation in sea lice infesting wild salmon hosts : the influence of parasite sex ratio and aggregation

Mate limitation in dioecious parasite species has the potential to impact parasite population growth. Our focus of interest was the influence of parasite sex distribution among hosts on parasite reproduction and transmission dynamics for populations of ectoparasitic sea lice (Lepeophtheirus salmonis Krøyer) establishing on wild juvenile salmon hosts. The data included more than 139,000 out-migrating juvenile pink salmon (Oncorhynchus gorbuscha (Walbaum)) and chum salmon (Oncorhynchus keta (Walbaum)) in British Columbia, Canada, sampled over nine years. For almost all years, the sex ratio of the reproductive stages of the sea lice was female-biased. The probability of a female being able to mate (i.e., of being attached to a fish also carrying a male louse) increased with increasing parasite abundance and parasite aggregation. We compared, with expected modeling predictions, the observed prevalence of pairs of sea lice (i.e., one reproductive louse of each sex) on a given fish and the observed probability of a female being able to mate. These comparisons showed that male and female sea lice tend to be distributed together rather than separately on hosts. Distribution together means that sea lice are distributed randomly on hosts according to a common negative binomial distribution, whereas distribution separately means that males are distributed according to a negative binomial and females are distributed in their own negative binomial among hosts. Despite the tendency for distribution together we found that, in every year, at least 30% of reproductive female sea lice experience mate limitation. This Allee effect will result in submaximal rates of parasite reproduction at low parasite abundances and may limit parasite transmission. The work has important implications for salmon parasite management and the health both of captive farm salmon populations and migratory wild stocks. More broadly, these results demonstrate the potential impact of mate limitation as a constraint to the establishment and spread of wild ectoparasite populations

ASYMMETRIC LEAVES1 regulates abscission zone placement in Arabidopsis flowers

BACKGROUND: The sepals, petals and stamens of Arabidopsis flowers detach via abscission zones formed at their boundaries with the underlying receptacle. The ASYMMETRIC LEAVES1 (AS1) MYB transcription factor plays a critical role in setting boundaries between newly formed leaf primordia and the shoot meristem. By repressing expression of a set of KNOTTED1-LIKE HOMEODOMAIN (KNOX) genes from developing leaf primordia, AS1 and its partner ASYMMETRIC LEAVES2 allow the patterning and differentiation of leaves to proceed. Here we show a unique role for AS1 in establishing the positions of the sepal and petal abscission zones in Arabidopsis flowers. RESULTS: In as1 mutant flowers, the sepal abscission zones are displaced into inverted V-shaped positions, leaving behind triangular stubs of tissue when the organs abscise. Movement of the petal abscission zones is also apparent. Abscission of the medial sepals is delayed in as1 flowers; loss of chlorophyll in the senescing sepals contrasts with proximal zones that remain green. AS1 has previously been shown to restrict expression of the KNOX gene, BREVIPEDICELLUS (BP), from the sepals. We show here that loss of BP activity in as1 flowers is sufficient to restore the positions of the sepal and petal abscission zones, the sepal-receptacle boundary of the medial sepals and the timing of their abscission. CONCLUSIONS: Our results indicate that AS1 activity is critical for the proper placement of the floral organ abscission zones, and influences the timing of organ shedding

A 42.3-43.6 GHz spectral survey of Orion BN/KL: First detection of the v=0 J=1-0 line from the isotopologues 29SiO and 30SiO

We have surveyed molecular line emission from Orion BN/KL from 42.3 to 43.6 GHz with the Green Bank Telescope. Sixty-seven lines were identified and ascribed to 13 different molecular species. The spectrum at 7 mm is dominated by SiO, SO2, CH3OCH3, and C2H5CN. Five transitions have been detected from the SiO isotopologues 28SiO, 29SiO, and 30SiO. We report here for the first time the spectra of the 29SiO and 30SiO v=0 J=1-0 emission in Orion BN/KL, and we show that they have double-peaked profiles with velocity extents similar to the main isotopologue. The main motivation for the survey was the search of high-velocity (100-1000 km/s) outflows in the BN/KL region as traced by SiO Doppler components. Some of the unidentified lines in principle could be high-velocity SiO features, but without imaging data their location cannot be established. Wings of emission are present in the v=0 28SiO, 29SiO and 30SiO profiles, and we suggest that the v=0 emission from the three isotopologues might trace a moderately high-velocity (~30-50 km/s) component of the flows around the high-mass protostar Source I in the Orion BN/KL region. We also confirm the 7 mm detection of a complex oxygen-bearing species, acetone (CH3COCH3), which has been recently observed towards the hot core at 3 mm, and we have found further indications of the presence of long cyanopolyynes (HC5N and HC7N) in the quiescent cold gas of the extended ridge.Comment: 27 pages, 3 figures, accepted by Ap

Molecular symmetry group analysis of the low-wavenumber torsions and vibration-torsions in the S1 state and ground state cation of p-xylene: an investigation using resonance-enhanced multiphoton ionization (REMPI) and zero-kinetic-energy (ZEKE) spectroscopy

For the first time, a molecular symmetry group (MSG) analysis has been undertaken in the investigation of the electronic spectroscopy of p-xylene (p-dimethylbenzene). Torsional and vibration-torsional (vibtor) levels in the S1 state and ground state of the cation of p-xylene (p-dimethylbenzene) are investigated using resonance-enhanced multiphoton ionization (REMPI) and zero-kinetic-energy (ZEKE) spectroscopy. In the present work, we concentrate on the 0–350 cm 1 region, where there are a number of torsional and vibtor bands and we discuss the assignment of this region. In an accompanying paper [Tuttle et al. J. Chem. Phys. XXX, xxxxxx (2016)], we examine the 350–600 cm 1 region where vibtor levels are observed as part of a Fermi resonance. The similarity of much of the observed spectral activity to that in the related substituted benzenes, toluene and para-fluorotoluene, is striking, despite the different symmetries. The discussion necessitates a consideration of the MSG of p-xylene, which has been designated G72, but we shall also designate [3,3]D2h and we include the symmetry operations, character table and direct product table for this. We also discuss the symmetries of the internal rotor (torsional) levels and the selection rules for the particular electronic transition of p-xylene investigated here

Molecular symmetry group analysis of the low-wavenumber torsions and vibration-torsions in the S1 state and ground state cation of p-xylene: an investigation using resonance-enhanced multiphoton ionization (REMPI) and zero-kinetic-energy (ZEKE) spectroscopy

For the first time, a molecular symmetry group (MSG) analysis has been undertaken in the investigation of the electronic spectroscopy of p-xylene (p-dimethylbenzene). Torsional and vibration-torsional (vibtor) levels in the S1 state and ground state of the cation of p-xylene (p-dimethylbenzene) are investigated using resonance-enhanced multiphoton ionization (REMPI) and zero-kinetic-energy (ZEKE) spectroscopy. In the present work, we concentrate on the 0–350 cm 1 region, where there are a number of torsional and vibtor bands and we discuss the assignment of this region. In an accompanying paper [Tuttle et al. J. Chem. Phys. XXX, xxxxxx (2016)], we examine the 350–600 cm 1 region where vibtor levels are observed as part of a Fermi resonance. The similarity of much of the observed spectral activity to that in the related substituted benzenes, toluene and para-fluorotoluene, is striking, despite the different symmetries. The discussion necessitates a consideration of the MSG of p-xylene, which has been designated G72, but we shall also designate [3,3]D2h and we include the symmetry operations, character table and direct product table for this. We also discuss the symmetries of the internal rotor (torsional) levels and the selection rules for the particular electronic transition of p-xylene investigated here

CCSD(T) Study of CD3-O-CD3 and CH3-O-CD3 Far-Infrared Spectra

From a vibrationally corrected 3D potential energy surface determined with highly correlated ab initio calculations (CCSD(T)), the lowest vibrational energies of two dimethyl-ether isotopologues, 12CH3–16O–12CD3 (DME-d3) and 12CD3–16O–12CD3 (DME-d6), are computed variationally. The levels that can be populated at very low temperatures correspond to the COC-bending and the two methyl torsional modes. Molecular symmetry groups are used for the classification of levels and torsional splittings. DME-d6 belongs to the G36 group, as the most abundant isotopologue 12CH3–16O–12CH3 (DME-h6), while DME-d3 is a G18 species. Previous assignments of experimental Raman and far-infrared spectra are discussed from an effective Hamiltonian obtained after refining the ab initio parameters. Because a good agreement between calculated and experimental transition frequencies is reached, new assignments are proposed for various combination bands corresponding to the two deuterated isotopologues and for the 020 → 030 transition of DME-d6. Vibrationally corrected potential energy barriers, structural parameters, and anharmonic spectroscopic parameters are provided. For the 3N – 9 neglected vibrational modes, harmonic and anharmonic fundamental frequencies are obtained using second-order perturbation theory by means of CCSD and MP2 force fields. Fermi resonances between the COC-bending and the torsional modes modify DME-d3 intensities and the band positions of the torsional overtones

Ultrathin Oxide Films by Atomic Layer Deposition on Graphene

In this paper, a method is presented to create and characterize mechanically robust, free standing, ultrathin, oxide films with controlled, nanometer-scale thickness using Atomic Layer Deposition (ALD) on graphene. Aluminum oxide films were deposited onto suspended graphene membranes using ALD. Subsequent etching of the graphene left pure aluminum oxide films only a few atoms in thickness. A pressurized blister test was used to determine that these ultrathin films have a Young's modulus of 154 \pm 13 GPa. This Young's modulus is comparable to much thicker alumina ALD films. This behavior indicates that these ultrathin two-dimensional films have excellent mechanical integrity. The films are also impermeable to standard gases suggesting they are pinhole-free. These continuous ultrathin films are expected to enable new applications in fields such as thin film coatings, membranes and flexible electronics.Comment: Nano Letters (just accepted

Microwave, infrared and Raman spectra, r0 structural parameters, ab initio calculations and vibrational assignment of 1-fluoro-1-silacyclopentanea)

The microwave spectrum (6500–18 500 MHz) of 1-fluoro-1-silacyclopentane, c-C4H8SiHF has been recorded and 87 transitions for the 28Si, 29Si, 30Si, and 13C isotopomers have been assigned for a single conformer. Infrared spectra (3050-350 cm−1) of the gas and solid and Raman spectrum (3100-40 cm−1) of the liquid have also been recorded. The vibrational data indicate the presence of a single conformer with no symmetry which is consistent with the twist form. Ab initio calculations with a variety of basis sets up to MP2(full)/aug-cc-pVTZ predict the envelope-axial and envelope-equatorial conformers to be saddle points with nearly the same energies but much lower energy than the planar conformer. By utilizing the microwaverotational constants for seven isotopomers (28Si, 29Si, 30Si, and four 13C) combined with the structural parameters predicted from the MP2(full)/6–311+G(d,p) calculations, adjusted r0 structural parameters have been obtained for the twist conformer. The heavy atom distances in Å are: r0(SiC2) = 1.875(3); r0(SiC3) = 1.872(3); r0(C2C4) = 1.549(3); r0(C3C5) = 1.547(3); r0(C4C5) = 1.542(3); r0(SiF) = 1.598(3) and the angles in degrees are: ∠CSiC = 96.7(5); ∠SiC2C4 = 103.6(5); ∠SiC3C5 = 102.9(5); ∠C2C4C5 = 108.4(5); ∠C3C5C4 = 108.1(5); ∠F6Si1C2 = 110.7(5); ∠F6Si1C3 = 111.6(5). The heavy atom ring parameters are compared to the corresponding rs parameters. Normal coordinate calculations with scaled force constants from MP2(full)/6–31G(d) calculations were carried out to predict the fundamental vibrational frequencies, infrared intensities, Raman activities, depolarization values, and infrared band contours. These experimental and theoretical results are compared to the corresponding quantities of some other five-membered rings

Culture shapes how we look at faces

Background: Face processing, amongst many basic visual skills, is thought to be invariant across all humans. From as early as 1965, studies of eye movements have consistently revealed a systematic triangular sequence of fixations over the eyes and the mouth, suggesting that faces elicit a universal, biologically-determined information extraction pattern. Methodology/Principal Findings: Here we monitored the eye movements of Western Caucasian and East Asian observers while they learned, recognized, and categorized by race Western Caucasian and East Asian faces. Western Caucasian observers reproduced a scattered triangular pattern of fixations for faces of both races and across tasks. Contrary to intuition, East Asian observers focused more on the central region of the face. Conclusions/Significance: These results demonstrate that face processing can no longer be considered as arising from a universal series of perceptual events. The strategy employed to extract visual information from faces differs across cultures

Managing marine disease emergencies in an era of rapid change

Infectious marine diseases can decimate populations and are increasing among some taxa due to global change and our increasing reliance on marine environments. Marine diseases become emergencies when significant ecological, economic or social impacts occur. We can prepare for and manage these emergencies through improved surveillance, and the development and iterative refinement of approaches to mitigate disease and its impacts. Improving surveillance requires fast, accurate diagnoses, forecasting disease risk and real-time monitoring of disease-promoting environmental conditions. Diversifying impact mitigation involves increasing host resilience to disease, reducing pathogen abundance and managing environmental factors that facilitate disease. Disease surveillance and mitigation can be adaptive if informed by research advances and catalysed by communication among observers, researchers and decision-makers using information-sharing platforms. Recent increases in the awareness of the threats posed by marine diseases may lead to policy frameworks that facilitate the responses and management that marine disease emergencies require