1,511 research outputs found
Homogeneous, heterogeneous or shrinkage estimators? Some empirical evidence from French regional gasoline consumption
This paper contrasts the performance of heterogeneous and shrinkage estimators versus the more traditional homogeneous panel data estimators. The analysis utilizes a panel data set from 21 French regions over the period 1973-1998 and a dynamic demand specification to study the gasoline demand in France. Out-of-sample forecast performance as well as the plausibility of the various estimators are contrasted.Panel data; French gasoline demand; Error components; Heterogeneous estimators; Shrinkage estimators
Systematic review of the current status of cadaveric simulation for surgical training
Background:
There is growing interest in and provision of cadaveric simulation courses for surgical trainees. This is being driven by the need to modernize and improve the efficiency of surgical training within the current challenging training climate. The objective of this systematic review is to describe and evaluate the evidence for cadaveric simulation in postgraduate surgical training.
Methods:
A PRISMA‐compliant systematic literature review of studies that prospectively evaluated a cadaveric simulation training intervention for surgical trainees was undertaken. All relevant databases and trial registries were searched to January 2019. Methodological rigour was assessed using the widely validated Medical Education Research Quality Index (MERSQI) tool.
Results:
A total of 51 studies were included, involving 2002 surgical trainees across 69 cadaveric training interventions. Of these, 22 assessed the impact of the cadaveric training intervention using only subjective measures, five measured impact by change in learner knowledge, and 23 used objective tools to assess change in learner behaviour after training. Only one study assessed patient outcome and demonstrated transfer of skill from the simulated environment to the workplace. Of the included studies, 67 per cent had weak methodology (MERSQI score less than 10·7).
Conclusion:
There is an abundance of relatively low‐quality evidence showing that cadaveric simulation induces short‐term skill acquisition as measured by objective means. There is currently a lack of evidence of skill retention, and of transfer of skills following training into the live operating theatre
Automated Rapid Prototyping of 3D Ceramic Parts
An automated system of manufacturing equipment produces three-dimensional (3D) ceramic parts specified by computational models of the parts. The system implements an advanced, automated version of a generic rapid-prototyping process in which the fabrication of an object having a possibly complex 3D shape includes stacking of thin sheets, the outlines of which closely approximate the horizontal cross sections of the object at their respective heights. In this process, the thin sheets are made of a ceramic precursor material, and the stack is subsequently heated to transform it into a unitary ceramic object. In addition to the computer used to generate the computational model of the part to be fabricated, the equipment used in this process includes: 1) A commercially available laminated-object-manufacturing machine that was originally designed for building woodlike 3D objects from paper and was modified to accept sheets of ceramic precursor material, and 2) A machine designed specifically to feed single sheets of ceramic precursor material to the laminated-object-manufacturing machine. Like other rapid-prototyping processes that utilize stacking of thin sheets, this process begins with generation of the computational model of the part to be fabricated, followed by computational sectioning of the part into layers of predetermined thickness that collectively define the shape of the part. Information about each layer is transmitted to rapid-prototyping equipment, where the part is built layer by layer. What distinguishes this process from other rapid-prototyping processes that utilize stacking of thin sheets are the details of the machines and the actions that they perform. In this process, flexible sheets of ceramic precursor material (called "green" ceramic sheets) suitable for lamination are produced by tape casting. The binder used in the tape casting is specially formulated to enable lamination of layers with little or no applied heat or pressure. The tape is cut into individual sheets, which are stacked in the sheet-feeding machine until used. The sheet-feeding machine can hold enough sheets for about 8 hours of continuous operation
Surface fatigue of soft steel
Thesis (B.S.)--Massachusetts Institute of Technology, Dept. of Mechanical Engineering, 1936.MICROFICHE COPY AVAILABLE IN ENGINEERING. MIT copy bound with: History of the regenerative cycle and its application in modern power plants / Thomas Larkins Charnley.Includes bibliographical references (leaves 61-62).by James W. Griffin and William H. Shewbridge.B.S
Herbicide Retention and Runoff Losses as Affected by Sugarcane Mulch Residue (Bulletin #883)
The purpose of this study was to evaluate the effectiveness of sugarcane residue (mulch cover) in reducing non-point source contamination of applied chemicals from sugarcane fields.https://digitalcommons.lsu.edu/agcenter_bulletins/1019/thumbnail.jp
Predicting the response of a submillimeter bolometer to cosmic rays
Bolometers designed to detect. submillimeter radiation also respond to cosmic, gamma, and x rays. Because detectors cannot be fully shielded from such energy sources, it is necessary to understand the effect of a photon or cosmic-ray particle being absorbed. The resulting signal (known as a glitch) can then be removed from raw data. We present measurements using an Americium-241 gamma radiation source to irradiate a prototype bolometer for the High Frequency Instrument in the Planck Surveyor satellite. Our measurements showed no variation in response depending on where the radiation was absorbed, demonstrating that the bolometer absorber and thermistor thermalize quickly. The bolometer has previously been fully characterized both electrically and optically. We find that using optically measured time constants underestimates the time taken for the detector to recover from a radiation absorption event. However, a full thermal model for the bolometer, with parameters taken from electrical and optical measurements, provides accurate time constants. Slight deviations from the model were seen at high energies; these can be accounted for by use of an extended model
Enhanced Mechanistic Understanding Through the Detection of Radical Intermediates in Organic Reactions
Two applications of a radical trap based on a homolytic substitution reaction (SH2') are presented for the trapping of short-lived radical intermediates in organic reactions. The first example is a photochemical cyanomethylation catalyzed by a Ru complex. Two intermediate radicals in the radical chain propagation have been trapped and detected using mass spectrometry (MS), along with the starting materials, products and catalyst degradation fragments. Although qualitative, these results helped to elucidate the reaction mechanism. In the second example, the trapping method was applied to study the radical initiation catalyzed by a triethylboronoxygen mixture. In this case, the concentration of trapped radicals was sufficiently high to enable their detection by nuclear magnetic resonance (NMR). Quantitative measurements made it possible to characterize the radical flux in the system under different reaction conditions (including variations of solvent, temperature and concentration) where modelling was complicated by chain reactions and heterogeneous mass transfer
Timing of pubertal stages and breast cancer risk : the Breakthrough Generations Study
Introduction:
Breast development and hormonal changes at puberty might affect breast cancer risk, but epidemiological analyses have focussed largely on age at menarche and not at other pubertal stages. Methods: We investigated associations between the timing of pubertal stages and breast cancer risk using data from a cohort study of 104,931 women (Breakthrough Generations Study, UK, 2003–2013). Pubertal variables were reported retrospectively at baseline. Breast cancer risk was analysed using Cox regression models with breast cancer diagnosis as the outcome of interest, attained age as the underlying time variable, and adjustment for potentially confounding variables.
Results:
During follow-up (mean = 4.1 years), 1094 breast cancers (including ductal carcinoma in situ) occurred. An increased breast cancer risk was associated with earlier thelarche (age when breast growth begins; HR [95% CI] = 1.23 [1.02, 1.48], 1 [referent] and 0.80 [0.69, 0.93] for ≤10, 11–12 and ≥13 years respectively), menarche (initiation of menses; 1.06 [0.93, 1.21], 1 [referent] and 0.78 [0.62, 0.99] for ≤12, 13–14 and ≥15 years), regular periods (0.99 [0.83, 1.18], 1 [referent] and 0.74 [0.59, 0.92] for ≤12, 13–14 and ≥15 years) and age reached adult height (1.25 [1.03, 1.52], 1 [referent] and 1.07 [0.87, 1.32] for ≤14, 15–16 and ≥17 years), and with increased time between thelarche and menarche (0.87 [0.65, 1.15], 1 [referent], 1.14 [0.96, 1.34] and 1.27 [1.04, 1.55] for <0, 0, 1 and ≥2 years), and shorter time between menarche and regular periods (1 [referent], 0.87 [0.73, 1.04] and 0.66 [0.50, 0.88] for 0, 1 and ≥2 years). These associations were generally similar when considered separately for premenopausal and postmenopausal breast cancer.
Conclusions:
Breast duct development may be a time of heightened susceptibility to risk of carcinogenesis, and greater attention needs to be given to the relation of breast cancer risk to the different stages of puberty
- …